You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Networkable Automated Water Vapor Lidar for Tropospheric Profiling
SBC: PHYSICAL SCIENCES INC. Topic: 03gMeasurement of the vertical profile of H2O vapor in the lower atmosphere can provide new understanding of the dynamics of H2O vapor mass transport. Such measurements can improve predictive capability for precipitation forecasts as well as lead to increased understanding of complex feedback mechanisms involving H2O vapor, temperature, radiative balance, and precipitation and therefore are important ...
STTR Phase II 2013 Department of Energy -
Advanced Spectroscopic Capabilities for 3-D Synchrotron X-Ray Microscopes
SBC: Xradia Topic: 09aMany important technology challenges today such as the capacity and life time of batteries require new characterization techniques to understand and improve performance. In the STTR Phase II project, novel x-ray microscope techniques and software are developed to be able to image samples in three dimensions and determine chemical composition and function on a microscopic level. As known from ubi ...
STTR Phase II 2013 Department of Energy -
Resonant Enhanced Infrared Nano-Spectroscopy (REINS)
SBC: Anasys Instruments Corp. Topic: 14bInfrared spectroscopy is the most widely used technique for chemical characterization with a worldwide market of over $1B annually. Conventional infrared spectroscopy suffers, however, from fundamental spatial resolution limits that prohibit its application at the nanoscale. This has prevented widespread use of IR spectroscopy in the growing field of nanoscale materials. The atomic force microsc ...
STTR Phase II 2013 Department of Energy -
Advance Additive Manufacturing Method for SRF Cavities of Various Geometries
SBC: RADIABEAM TECHNOLOGIES, LLC Topic: 34aCurrent state-of-the-art SRF accelerating cavities require the use of many complex and expensive techniques throughout their fabrication/performance cycle. This project will utilize a novel Additive Manufacturing (AM) process to produce nearly monolithic SRF niobium cavities of arbitrary shape with features such as optimized wall thickness and/or integrated stiffeners, greatly reducing the cost a ...
STTR Phase II 2013 Department of Energy -
Polymer Nanowire Sensor Array for Subsurface CO2 Monitoring
SBC: INNOSENSE CORPORATION Topic: 17cThe DOEs & quot;Monitoring Verification and Accounting (MVA) program goal is to confirm permanent storage of CO2 in geologic formations by real-time monitoring should CO2 leak. Remote technologies, effective for atmospheric or above ground CO2 monitoring, are ineffective for subsurface, and it is where leakage can be detected first. By the time leaked CO2 slowly appears on the surface, CO2 may hav ...
STTR Phase II 2013 Department of Energy -
Advanced Plastic Scintillators for Nuclear Non-Proliferation Monitoring
SBC: RADIATION MONITORING DEVICES, INC. Topic: 03cThe proliferation of weapons of mass destruction (WMD) is a serious threat. Preventing the spread of these nuclear weapons has reached a state of heightened urgency in recent years. Neutron detection is an important component of the overall detection techniques used in identifying WMDs. At present, there is need for an efficient detection system that would allow neutron detection wit ...
SBIR Phase II 2013 Department of Energy -
Low-Cost Integrated Package and Heat Sink for High-Temperature Power Modules
SBC: ADVANCED THERMAL TECHNOLOGIES Topic: 09bThere is a growing demand for power electronics that can operate under the high temperature and high power conditions that will be encountered in Hybrid Electric Vehicles (HEVs). As the coolant temperature used to dissipate heat from electronics increases, the operation of power semiconductor devices becomes severely limited in order that the safe operating temperature limit of the semiconductors ...
SBIR Phase II 2013 Department of Energy -
Real-Time In-Situ Metrology for Lithium-Ion Battery R&D and Manufacturing
SBC: APPLIED SPECTRA INC Topic: 09bThe development of cost effective lithium-ion batteries is the cornerstone for meeting the goals of vehicle electrification. Both researchers and manufacturers of Li-ion batteries need a rapid and simple- to-use powerful technology that can enable nanometer-scale depth resolution chemical analysis in real time during the electrochemical cycling of the batteries. Currently available analytical tech ...
SBIR Phase II 2013 Department of Energy -
Platform for Integrated Cookstove Assessment (PICA)
SBC: Berkeley Air Monitoring Group Inc. Topic: 10aDependence on dirty solid fuels and inefficient stoves for cooking, heating, and lighting by over 3 billion people in developing countries has very large negative effects on health, environment, livelihoods, gender equality, and global climate. To address this problem and fill the unmet need for robust, inexpensive instrumentation for measuring the in-field performance and usage of cookstoves, we ...
SBIR Phase II 2013 Department of Energy -
Process Intensification by Integrated Reaction and Distillation for Synthesis of Bio-Renewable Organic Acid Esters
SBC: E3TECSERVICE, LLC Topic: 10bThe global market for bio-based chemicals is at a critical stage of development, with focus on new bio-based routes to chemicals and building the type of commercial-scale plants that will enable the market to truly compete with petroleum derived chemicals. The 2011 Frost & amp; Sullivan report identifies six market challenges associated with bio-based chemicals production: 1) price volatility; 2) ...
SBIR Phase II 2013 Department of Energy