List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Interactive Software Tools for Processing QIF-formatted Part Models to Generate Realistic and Accurate Measurement Plans and Programs in Standard Digital Languages

    SBC: METROSAGE, L L C            Topic: NA

    The QIF standard shows the promise of offering an environment where best-in-class metrology applications can be linked to yield solutions that are automated, optimized, adaptive, and traceable, maintaining the agility required to ensure U. S. global competitiveness. While the QIF standard has reached a substantial level of comprehensiveness and maturity, the embodiment of the standard in actual, c ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  2. Large Field of View Microscope for Rapid, High-Resolution Imaging

    SBC: Nikira Labs Inc.            Topic: NA

    In this SBIR effort, Nikira Labs Inc. proposes to develop and deliver a high-resolution (< 1.2 micron) microscope that can rapidly (< 60 seconds) image a large field of view (> 1 cm2). The instrument will provide a wide array of imaging modalities, including brightfield, darkfield, fluorescence, quantitative phase, and Rheinberg imaging. In Phase II, Nikira Labs will fabricate, test, and deliver a ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  3. Space weather-based position error maps for TEC- OnLine (SpoT-On)

    SBC: Space Environment Technologies            Topic: 831

    TECHNICAL ABSTRACT: The Space weather-based Position error maps for TEC - On-line (SpoT-On) project will use GPS-GNSS based TEC data, integrated into the Global Assimilation of Ionospheric Measurements (GAIM) operational system at the Utah State University Space Weather Center to produce an order of magnitude improved TEC position correction maps. These will be publicly and globally accessible. A ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Camera-based Examination of Risk via Behavioral Evaluation with Remote Underwater Surveillance

    SBC: Forever Oceans Corporation            Topic: 841

    TECHNICAL ABSTRACT: Commercial marine aquaculture operators face many operational hazards including disease, predators, husbandry operations, and environmental changes. Most of theses risks are only identified with constant surveillance and physical presence at a farm site. However, human observation of risk factors is expensive, slow, and sometimes ineffective. Sensors are available to monitor in ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Single-Mast Transmit-Receive Antenna for Long-Range 4- 5.5 MHz Coastal HF Radars

    SBC: CODAR OCEAN SENSORS, LTD            Topic: 824

    TECHNICAL ABSTRACT: The U.S. High Frequency Radar (HFR) network contains more than 140 coastal stations that provide hourly two-dimensional coastal surface currents. Approximately one-third of these are Long Range (LR) systems that transmit in the 4–5.5 MHz frequency band with offshore ranges and resolutions of 160-220 km and 6 km, respectively. Currents provided by this network have numerous ap ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Low Cost, High Precision Water Monitoring System

    SBC: Swift Engineering, Inc.            Topic: 833

    TECHNICAL ABSTRACT: This paper proposes development of a low-cost water monitoring system wirelesslynetworked to upload data to FieldKit for cloud based data visualization and validation. This will enable citizen scientists to collect a variety of parameters including conductivity, temperature, depth, and ocean noise measurements on an adhoc basis while contributing to a large data repository whic ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  7. Adaptive mask flow photometer

    SBC: Actinix            Topic: 822

    TECHNICAL ABSTRACT: A flow micro-photometer is proposed that can measure absorption and backscatter from single aquatic particles including phytoplankton, detritus and minerals. This instrument will make use of a novel adaptive diaphragm to define an analysis region of interest that exactly matches the size, shape and orientation of each particle being analyzed. A micro-fluidic chip will be used t ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  8. Design of an Autonomous, Green Powered, Mobile Coastal Monitor

    SBC: Tridentis Advanced Marine Vehicles LLC            Topic: 821

    TECHNICAL ABSTRACT: The mobile coastal monitor project is designed to prove out the research done in Phase I using a Proof of Concept demonstration craft. The Proof of Concept demonstrator will be a geometrically scaled version of the craft designed during Phase I. The Phase I craft, the Advanced Coastal Monitor (ACM) was designed to use state-of-the-art green power supplies and apply them as the ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  9. Validation of Low Hydrogen Embrittlement (LHE) Alkaline Zinc Nickel Electroplating for Steel and Aluminum Electrical Connectors, Back-Shells and Components

    SBC: Engineering And Software System Solutions, Inc.            Topic: AF161007

    Many of the US Department of Defense (DOD) electrical connectors, back-shells and components currently contain cadmium (Cd).Cadmium is a known carcinogen.Furthermore, the cadmium is typically conversion coated with a hex-chromate which is also hazardous.Both the cadmium plating process and its subsequent conversion coating have been proven to be toxic (unlike other processes such as chromium plati ...

    SBIR Phase II 2018 Department of DefenseAir Force
  10. Direct Metal Adsorption Printing (DMAP)

    SBC: Digibeam Corporation            Topic: AF161010

    3D printing has recently taking a lead role as a potential solution for future manufacturing. However, there are still many problems and limitations to the technology for cost effective high resolution, high throughput manufacturing.Derived from the SBIR Phase I effort, Digibeam is presenting an innovative solution using a different beam and growth process that directly addresses both resolution a ...

    SBIR Phase II 2018 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government