List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Topic 345: RadTox- Measuring Radiation Toxicity using Circulating DNA

    SBC: DiaCarta, Inc.            Topic: NCI

    The QuantiDNA RadTox System is a unique, patented technology that measures tissue damage shortly following injury using cell-free DNA from a drop of blood. Premised on murine and primate studies showing circulating DNA is logarithmically increased with whole-body radiation dose, RadTox has the potential to overcome many of the species-specific challenges faced by biomarker panels. The phase I SBIR ...

    SBIR Phase II 2018 Department of Health and Human ServicesNational Institutes of Health
  2. Topic 349: Quantum Dot FRET Immunoassay to Quantify Intramolecular Epitopes of Analytes in Tissue Sections

    SBC: Ocean Nano Tech LLC            Topic: NCI

    This proposal is to develop a novel slide based proximity assay platform to quantify protein phosphorylation on tissues. The novelty of this assay platform is derived from the use of the quantum dot with two emission peaks for fluorescence resonance energy transfer (FRET): one emission as internal standard and the other as FRET donor. Change of ratio of the two emission intensity during the FRET c ...

    SBIR Phase II 2018 Department of Health and Human ServicesNational Institutes of Health
  3. A MULTIPLEXED REMOTE SYSTEM FOR FILOVIRUS DISEASE SURVEILLANCE

    SBC: Cellmic, LLC            Topic: NIAID

    Proposes an advanced Ebola and Marburg disease telemonitoring and assessment platform that will enable the digital modernization of point of care diagnosticsdisease surveillanceand healthcare screening by minimally trained personnel at the point of careOffering a complete diagnostics solutionthe platform includes a microfluidics assay for the detection of infections caused by Ebola and Marburg fil ...

    SBIR Phase II 2018 Department of Health and Human ServicesNational Institutes of Health
  4. Validation of Low Hydrogen Embrittlement (LHE) Alkaline Zinc Nickel Electroplating for Steel and Aluminum Electrical Connectors, Back-Shells and Components

    SBC: Engineering And Software System Solutions, Inc.            Topic: AF161007

    Many of the US Department of Defense (DOD) electrical connectors, back-shells and components currently contain cadmium (Cd).Cadmium is a known carcinogen.Furthermore, the cadmium is typically conversion coated with a hex-chromate which is also hazardous.Both the cadmium plating process and its subsequent conversion coating have been proven to be toxic (unlike other processes such as chromium plati ...

    SBIR Phase II 2018 Department of DefenseAir Force
  5. Direct Metal Adsorption Printing (DMAP)

    SBC: Digibeam Corporation            Topic: AF161010

    3D printing has recently taking a lead role as a potential solution for future manufacturing. However, there are still many problems and limitations to the technology for cost effective high resolution, high throughput manufacturing.Derived from the SBIR Phase I effort, Digibeam is presenting an innovative solution using a different beam and growth process that directly addresses both resolution a ...

    SBIR Phase II 2018 Department of DefenseAir Force
  6. Near Field Scanner

    SBC: PHYSICAL OPTICS CORPORATION            Topic: AF161022

    To address the Air Force need for advanced radar characterization of fighter aircraft, Physical Optics Corporation (POC) is developing a new Near Field Scanner (NeFS) based on novel RF/microwave sensing and scanning technologies. Specifically, innovations in sensor miniaturization and broadband functionality, combined with an innovative 3D scanning platform, enable NeFS to measure near-field radia ...

    SBIR Phase II 2018 Department of DefenseAir Force
  7. Highly Parallel LIDAR-based Automated Target Recognition

    SBC: PHYSICAL OPTICS CORPORATION            Topic: AF161139

    To address the Air Force need for an automated target recognition (ATR) capability that uses Light Detection and Ranging (LIDAR), Physical Optics Corporation (POC) proposes to advance the development of the Highly Parallel LIDAR-based Automated Target Recognition (PLATR) system, which was proven feasible in Phase I. PLATR is based on an innovative combination of target isolation, target pose estim ...

    SBIR Phase II 2018 Department of DefenseAir Force
  8. Flexible Sensor Network and Its Embedded Integrated Circuits for Structural Health Monitoring

    SBC: ACELLENT TECHNOLOGIES, INC            Topic: AF16AT03

    Structural Health Monitoring (SHM) can be reliably used to perform on-line health monitoring of any type of structures with minimal human involvement. Current SHM systems can perform the functions required but are heavy, bulky and difficult to integrate with the structure to provide on-board real-time structural integrity assessment. Embedding of currently available sensors and electronics used by ...

    STTR Phase II 2018 Department of DefenseAir Force
  9. Three-Dimensional Density Imaging by Rayleigh Scattering

    SBC: Metrolaser, Inc.            Topic: AF16AT06

    A diagnostic is proposed for obtaining instantaneous three-dimensional volumetric distributions of density in a flow field at velocities ranging from subsonic to supersonic. Multiple Sheet Filtered Rayleigh Scattering (MSFRS) will be developed, which enables a series of two-dimensional images to be rapidly obtained making up a volumetric image while suppressing background scattering from wind tunn ...

    STTR Phase II 2018 Department of DefenseAir Force
  10. Infrared Micro-Laser Arrays for Target Image Projection

    SBC: Attollo Engineering, LLC            Topic: AF16AT22

    Current scene projection hardware is challenged to simultaneously meet the requirements for high peak temperature (> 2000K),high resolution (2Kx2K), response time < 4 ms, cryogenic and temporally uniform photon flux.MEMS, Resistor arrays, liquid crystals, and photonic crystals all suffer in one or more areas.MEMS suffer from flicker and low dynamic range.Resistor arrays suffer from low frame rates ...

    STTR Phase II 2018 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government