List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Validation of Low Hydrogen Embrittlement (LHE) Alkaline Zinc Nickel Electroplating for Steel and Aluminum Electrical Connectors, Back-Shells and Components

    SBC: Engineering And Software System Solutions, Inc.            Topic: AF161007

    Many of the US Department of Defense (DOD) electrical connectors, back-shells and components currently contain cadmium (Cd).Cadmium is a known carcinogen.Furthermore, the cadmium is typically conversion coated with a hex-chromate which is also hazardous.Both the cadmium plating process and its subsequent conversion coating have been proven to be toxic (unlike other processes such as chromium plati ...

    SBIR Phase II 2018 Department of DefenseAir Force
  2. Direct Metal Adsorption Printing (DMAP)

    SBC: Digibeam Corporation            Topic: AF161010

    3D printing has recently taking a lead role as a potential solution for future manufacturing. However, there are still many problems and limitations to the technology for cost effective high resolution, high throughput manufacturing.Derived from the SBIR Phase I effort, Digibeam is presenting an innovative solution using a different beam and growth process that directly addresses both resolution a ...

    SBIR Phase II 2018 Department of DefenseAir Force
  3. Near Field Scanner

    SBC: PHYSICAL OPTICS CORPORATION            Topic: AF161022

    To address the Air Force need for advanced radar characterization of fighter aircraft, Physical Optics Corporation (POC) is developing a new Near Field Scanner (NeFS) based on novel RF/microwave sensing and scanning technologies. Specifically, innovations in sensor miniaturization and broadband functionality, combined with an innovative 3D scanning platform, enable NeFS to measure near-field radia ...

    SBIR Phase II 2018 Department of DefenseAir Force
  4. Highly Parallel LIDAR-based Automated Target Recognition

    SBC: PHYSICAL OPTICS CORPORATION            Topic: AF161139

    To address the Air Force need for an automated target recognition (ATR) capability that uses Light Detection and Ranging (LIDAR), Physical Optics Corporation (POC) proposes to advance the development of the Highly Parallel LIDAR-based Automated Target Recognition (PLATR) system, which was proven feasible in Phase I. PLATR is based on an innovative combination of target isolation, target pose estim ...

    SBIR Phase II 2018 Department of DefenseAir Force
  5. Index, Export and Search Archived Data for Enterprise Ground Satellite Command and Control Systems from Multiple Sources

    SBC: Data Fusion & Neural Networks, LLC            Topic: AF162004

    The MarkLogic architecture being delivered in this effort supports multiple missions simultaneously, employs automated indexing, and supports at-scale concurrent querying with performance evaluation. The DF&NN ANOM intelligent system provides affordable data-driven and goal-driven real-time automated abnormality detection, characterization, event tracking, historical context reporting, multiple sa ...

    SBIR Phase II 2018 Department of DefenseAir Force
  6. High-Energy Lithium-Ion Battery Technology to Extend Mission Duration of USAF Small Unmanned Aerial Systems (SUAS)

    SBC: ADA Technologies, Inc.            Topic: OSD09EP2

    The Air Force (AF) needs innovative energy storage solutions to provide meaningful improvements in small unmanned aerial system (SUAS) performance; this includes an ability to carry different payloads, improved range and endurance, to meet an evolving set of mission scenarios. The Department of Defense (DoD) SUAS market would benefit from domestically-produced and affordable energy storage solutio ...

    SBIR Phase II 2018 Department of DefenseAir Force
  7. Flexible Sensor Network and Its Embedded Integrated Circuits for Structural Health Monitoring

    SBC: ACELLENT TECHNOLOGIES, INC            Topic: AF16AT03

    Structural Health Monitoring (SHM) can be reliably used to perform on-line health monitoring of any type of structures with minimal human involvement. Current SHM systems can perform the functions required but are heavy, bulky and difficult to integrate with the structure to provide on-board real-time structural integrity assessment. Embedding of currently available sensors and electronics used by ...

    STTR Phase II 2018 Department of DefenseAir Force
  8. Three-Dimensional Density Imaging by Rayleigh Scattering

    SBC: Metrolaser, Inc.            Topic: AF16AT06

    A diagnostic is proposed for obtaining instantaneous three-dimensional volumetric distributions of density in a flow field at velocities ranging from subsonic to supersonic. Multiple Sheet Filtered Rayleigh Scattering (MSFRS) will be developed, which enables a series of two-dimensional images to be rapidly obtained making up a volumetric image while suppressing background scattering from wind tunn ...

    STTR Phase II 2018 Department of DefenseAir Force
  9. Infrared Micro-Laser Arrays for Target Image Projection

    SBC: Attollo Engineering, LLC            Topic: AF16AT22

    Current scene projection hardware is challenged to simultaneously meet the requirements for high peak temperature (> 2000K),high resolution (2Kx2K), response time < 4 ms, cryogenic and temporally uniform photon flux.MEMS, Resistor arrays, liquid crystals, and photonic crystals all suffer in one or more areas.MEMS suffer from flicker and low dynamic range.Resistor arrays suffer from low frame rates ...

    STTR Phase II 2018 Department of DefenseAir Force
  10. Low-Defect GeSn and SiGeSn for Integrated High-Performance SWIR and MWIR Optoelectronics

    SBC: Freedom Photonics LLC            Topic: AF16AT28

    Advanced imaging techniques and, novel intelligence, surveillance and reconnaissance (ISR) methods are of great interest to the U.S. Air Force and other Department of Defense (DoD) agencies, but associated high-costs of III-V and II-VI MWIR and SWIR materials prohibit their practical widespread deployment and integration with other optoelectronic devices. In this program, we intend to investigate ...

    STTR Phase II 2018 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government