You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Hypersonic Experimental Aerothermoelastic Test (HEAT)

    SBC: GLOBAL AEROSPACE CORPORATION            Topic: AF16AT24

    The U.S. Air Force is interested in developing hypersonic vehicles including reusable transport aircraft, cruise missiles, and unmanned systems. Hypersonic flight regimes result in multifaceted and very difficult design challenges that can be encapsulated into an aerothermoelastic problem, which is a complex interaction of structural, thermal, and aerodynamic mechanisms. When a flexible structural ...

    STTR Phase II 2018 Department of DefenseAir Force
  2. Prognostics Approaches for Remote Piloted Aircraft (RPA) Propulsion and Vehicle Systems in Harsh Environments

    SBC: MANAGEMENT SCIENCES INC            Topic: AF121170

    This is a follow-on SBIR Phase II as a result of a fully executed SBIR Technology Transition Plan to transition MSI’s COgnitive Stochastic MOdeling System (COSMOS) in a microsystem hardware to increase reliability of systems and components which would reduce maintenance and increase operational availability, which reduces the number of aircraft needed to complete missions. ACC and the AFRL ...

    SBIR Phase II 2018 Department of DefenseAir Force
  3. Validation of Low Hydrogen Embrittlement (LHE) Alkaline Zinc Nickel Electroplating for Steel and Aluminum Electrical Connectors, Back-Shells and Components

    SBC: ENGINEERING AND SOFTWARE SYSTEM SOLUTIONS, INC.            Topic: AF161007

    Many of the US Department of Defense (DOD) electrical connectors, back-shells and components currently contain cadmium (Cd).Cadmium is a known carcinogen.Furthermore, the cadmium is typically conversion coated with a hex-chromate which is also hazardous.Both the cadmium plating process and its subsequent conversion coating have been proven to be toxic (unlike other processes such as chromium plati ...

    SBIR Phase II 2018 Department of DefenseAir Force
  4. Direct Metal Adsorption Printing (DMAP)

    SBC: DIGIBEAM CORPORATION            Topic: AF161010

    3D printing has recently taking a lead role as a potential solution for future manufacturing. However, there are still many problems and limitations to the technology for cost effective high resolution, high throughput manufacturing.Derived from the SBIR Phase I effort, Digibeam is presenting an innovative solution using a different beam and growth process that directly addresses both resolution a ...

    SBIR Phase II 2018 Department of DefenseAir Force
  5. Near Field Scanner

    SBC: Physical Optics Corporation            Topic: AF161022

    To address the Air Force need for advanced radar characterization of fighter aircraft, Physical Optics Corporation (POC) is developing a new Near Field Scanner (NeFS) based on novel RF/microwave sensing and scanning technologies. Specifically, innovations in sensor miniaturization and broadband functionality, combined with an innovative 3D scanning platform, enable NeFS to measure near-field radia ...

    SBIR Phase II 2018 Department of DefenseAir Force
  6. Highly Parallel LIDAR-based Automated Target Recognition

    SBC: Physical Optics Corporation            Topic: AF161139

    To address the Air Force need for an automated target recognition (ATR) capability that uses Light Detection and Ranging (LIDAR), Physical Optics Corporation (POC) proposes to advance the development of the Highly Parallel LIDAR-based Automated Target Recognition (PLATR) system, which was proven feasible in Phase I. PLATR is based on an innovative combination of target isolation, target pose estim ...

    SBIR Phase II 2018 Department of DefenseAir Force
  7. Interactive Software Tools for Processing QIF-formatted Part Models to Generate Realistic and Accurate Measurement Plans and Programs in Standard Digital Languages

    SBC: METROSAGE, L L C            Topic: NA

    The QIF standard shows the promise of offering an environment where best-in-class metrology applications can be linked to yield solutions that are automated, optimized, adaptive, and traceable, maintaining the agility required to ensure U. S. global competitiveness. While the QIF standard has reached a substantial level of comprehensiveness and maturity, the embodiment of the standard in actual, c ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  8. Large Field of View Microscope for Rapid, High-Resolution Imaging

    SBC: NIKIRA LABS INC.            Topic: NA

    In this SBIR effort, Nikira Labs Inc. proposes to develop and deliver a high-resolution (< 1.2 micron) microscope that can rapidly (< 60 seconds) image a large field of view (> 1 cm2). The instrument will provide a wide array of imaging modalities, including brightfield, darkfield, fluorescence, quantitative phase, and Rheinberg imaging. In Phase II, Nikira Labs will fabricate, test, and deliver a ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  9. Wafer-Level Electronic-Photonic Co-Packaging

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: AF16AT01

    In phase II work, we will collaborate with Prof. Stefan Preble in RIT and continue to develop large scale hybrid integration and packaging techniques for key active photonic components such as lithium niobate on insulator (LNOI) modulators and modified uni-traveling (MUTC) photodiodes. We will demonstrate a low V, broadband, small footprint LNOI modulator with hybrid Si/LN or SiN/LN waveguide usin ...

    STTR Phase II 2018 Department of DefenseAir Force
  10. Flexible Sensor Network and Its Embedded Integrated Circuits for Structural Health Monitoring

    SBC: ACELLENT TECHNOLOGIES INC            Topic: AF16AT03

    Structural Health Monitoring (SHM) can be reliably used to perform on-line health monitoring of any type of structures with minimal human involvement. Current SHM systems can perform the functions required but are heavy, bulky and difficult to integrate with the structure to provide on-board real-time structural integrity assessment. Embedding of currently available sensors and electronics used by ...

    STTR Phase II 2018 Department of DefenseAir Force
US Flag An Official Website of the United States Government