List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Resilient Wayside Structures to Reduce Severity of Passenger Equipment Collisions and Derailments

    SBC: PROTECTION ENGINEERING CONSULTANTS LLC            Topic: 171FR3

    Proposal title: Resilient Wayside Structures to Reduce Severity of Passenger Equipment Collisions and Derailments Additional passenger fatalities/injuries can occur during derailments involving interaction with wayside structures. Analogously, automobile fatalities often result from interaction of vehicles with roadside structures; personnel hazard reduction is a key design criterion for roadsid ...

    SBIR Phase II 2018 Department of Transportation
  2. Ultralightweight Airframe Concepts for Air-launched Intelligence, Surveillance, and Reconnaissance (ISR) Unmanned Aerial Vehicles (UAVs)

    SBC: Judd Systems Technologies, LLC            Topic: AF151072

    The main goal of the ALERT Phase II program is the preliminary design of a robust air vehicle that can meet all the performance goals while using a structural design with a high content of dielectric skins. This includes determining the flight envelope required to complete the desired customer missions, and then sizing the flight surfaces and propulsion system for optimum performance. Since the AL ...

    SBIR Phase II 2018 Department of DefenseAir Force
  3. Direct Metal Adsorption Printing (DMAP)

    SBC: Digibeam Corporation            Topic: AF161010

    3D printing has recently taking a lead role as a potential solution for future manufacturing. However, there are still many problems and limitations to the technology for cost effective high resolution, high throughput manufacturing.Derived from the SBIR Phase I effort, Digibeam is presenting an innovative solution using a different beam and growth process that directly addresses both resolution a ...

    SBIR Phase II 2018 Department of DefenseAir Force
  4. Automated Test Equipment (ATE) Data Access and Management (ADAM)

    SBC: KNOWLEDGE BASED SYSTEMS, INC.            Topic: AF161015

    The objective of the Automated Test Equipment (ATE) Data Access and Management (ADAM) effort is to develop, refine, and ultimately deploy a risk management strategy and technical solution for automated ATE data access, collection, and management that meets information assurance (IA) and cybersecurity needsa key part of which involves avoiding the use of wireless communication technologies or any c ...

    SBIR Phase II 2018 Department of DefenseAir Force
  5. Near Field Scanner

    SBC: PHYSICAL OPTICS CORPORATION            Topic: AF161022

    To address the Air Force need for advanced radar characterization of fighter aircraft, Physical Optics Corporation (POC) is developing a new Near Field Scanner (NeFS) based on novel RF/microwave sensing and scanning technologies. Specifically, innovations in sensor miniaturization and broadband functionality, combined with an innovative 3D scanning platform, enable NeFS to measure near-field radia ...

    SBIR Phase II 2018 Department of DefenseAir Force
  6. Highly Parallel LIDAR-based Automated Target Recognition

    SBC: PHYSICAL OPTICS CORPORATION            Topic: AF161139

    To address the Air Force need for an automated target recognition (ATR) capability that uses Light Detection and Ranging (LIDAR), Physical Optics Corporation (POC) proposes to advance the development of the Highly Parallel LIDAR-based Automated Target Recognition (PLATR) system, which was proven feasible in Phase I. PLATR is based on an innovative combination of target isolation, target pose estim ...

    SBIR Phase II 2018 Department of DefenseAir Force
  7. Biomimetic Design of Morphing Micro Air Vehicles

    SBC: Texas Research Institute, Austin, Inc.            Topic: AF15AT01

    Over the past two decades significant progress has been made on the development of mission capable micro air vehicles (MAV) and small unmanned aircraft systems (sUAS) but the full potential of implementing multifunctional morphing wings using active materials has not been realized.A need exists to develop a MAV wing that can autonomously adapt to flight conditions allowing the vehicle to aggressiv ...

    STTR Phase II 2018 Department of DefenseAir Force
  8. Flexible Sensor Network and Its Embedded Integrated Circuits for Structural Health Monitoring

    SBC: ACELLENT TECHNOLOGIES, INC            Topic: AF16AT03

    Structural Health Monitoring (SHM) can be reliably used to perform on-line health monitoring of any type of structures with minimal human involvement. Current SHM systems can perform the functions required but are heavy, bulky and difficult to integrate with the structure to provide on-board real-time structural integrity assessment. Embedding of currently available sensors and electronics used by ...

    STTR Phase II 2018 Department of DefenseAir Force
  9. Three-Dimensional Density Imaging by Rayleigh Scattering

    SBC: Metrolaser, Inc.            Topic: AF16AT06

    A diagnostic is proposed for obtaining instantaneous three-dimensional volumetric distributions of density in a flow field at velocities ranging from subsonic to supersonic. Multiple Sheet Filtered Rayleigh Scattering (MSFRS) will be developed, which enables a series of two-dimensional images to be rapidly obtained making up a volumetric image while suppressing background scattering from wind tunn ...

    STTR Phase II 2018 Department of DefenseAir Force
  10. Low-Defect GeSn and SiGeSn for Integrated High-Performance SWIR and MWIR Optoelectronics

    SBC: Freedom Photonics LLC            Topic: AF16AT28

    Advanced imaging techniques and, novel intelligence, surveillance and reconnaissance (ISR) methods are of great interest to the U.S. Air Force and other Department of Defense (DoD) agencies, but associated high-costs of III-V and II-VI MWIR and SWIR materials prohibit their practical widespread deployment and integration with other optoelectronic devices. In this program, we intend to investigate ...

    STTR Phase II 2018 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government