You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Large-Area, Low-Cost, High-Resolution X-ray Detector and Electron Amplifier
SBC: ADELPHI TECHNOLOGY INC Topic: N/AThis Phase I Small Business Innovation Research proposal will develop porous dielectrics as a low-cost, large-area detector for high spatial resolution x-ray detection. An alternative to microchannel plates, porous dielectric electron amplifiers are formed by a thin layer, generally less than 1 mm, of a low density dielectric. The microscopic pores formed in such material, provide a natural, but m ...
SBIR Phase II 2001 National Aeronautics and Space Administration -
Electron Beam Processable Polyimides for High-Performance Composite Applications
SBC: Adherent Technologies, Inc. Topic: N/APerformance requirements for polymer matrix composites (PMCs) in aerospace and transportation applications are generally quite stringent. Among these requirements are excellent thermal stability, high strength and high toughness. Easy processing is also desirable. Electron-beam (e-beam) curing has the potential to significantly reduce the overall cost of manufacturing PMC parts for use in aerospac ...
SBIR Phase II 2001 National Aeronautics and Space Administration -
Nonlinear Stress-Modulated Ultrasonic Method for Bond Strength Characterization
SBC: Adler Consultants, Inc. Topic: N/AEnvironmental degradation of adhesive bonds of composite or metallic structures affects predominantly the adhesive/adherent interface by decreasing the number of molecular bonds between the adhesive and the substrate. The objective of the proposed Phase I work is to perform a feasibility study of a novel non-linear ultrasonic method for quantitative characterization of molecular bond density with ...
SBIR Phase II 2001 National Aeronautics and Space Administration -
Rapid Prototyping of continuous fiber reinforced ceramic matrix composites
SBC: Sensintel Inc. Topic: N/AFor propulsion related applications, materials must be able to demonstrate excellent ablation and oxidation resistance at temperature approaching 3500?C, adequate load bearing capabilities, non-catastrophic failure modes, and ability to withstand transient thermal shock. Advanced Ceramics Research, Inc. (ACR) has developed low cost, flexible-manufacturing processes for Zr & Hf-based carbon fiber r ...
SBIR Phase II 2001 National Aeronautics and Space Administration -
Heatpipe Power System (HPS) In-Space Fueling, A Simplified Approach
SBC: Advanced Methods & Materials (AMM) Topic: N/AA major objection to the use of nuclear energy for space applications is the perceived risk involved in the launching of a fully fueled nuclear reactor. Even when it is pointed out that the fuel is in fact not radioactive, concerns persist. It is acknowledged that to design a reactor able to withstand all conceivable launch accidents would result in an impractical heavy design. To avoid the above ...
SBIR Phase II 2001 National Aeronautics and Space Administration -
Autonomous Docking with the Laser Dynamic Range Imager Optical Sensor
SBC: AMERICAN GNC CORPORATION Topic: N/AThis Phase I proposal develops a novel technology to automate the process of docking the Shuttle to the International Space Station (ISS). This technology is based on the Laser Dynamic Range Imager (LDRI) and a cross-plane point tracking algorithm. The LDRI provides the range measurement from the laser unit to the field of view for far or near inspection distances. The LDRI is a dynamic adaptation ...
SBIR Phase II 2001 National Aeronautics and Space Administration -
MagOrion-A Nuclear Propelled MagSail for Human Exploration of the Outer Planets
SBC: ANDREWS SPACE, INC. Topic: N/AManned exploration beyond Mars requires very high specific energy. The only potential solution under discussion is fusion propulsion. However, fusion has been ten years away for forty years. We have an available solution that combines new technology with an old concept ¿ ¿Project Orion¿. The proposed MagOrion Propulsion System combines a magnetic sail (MagSail) with conventional small yield (0. ...
SBIR Phase II 2001 National Aeronautics and Space Administration -
An Analysis Model Bus for Distributed, Collaborative Engineering Modeling and Si
SBC: Applied Research Associates, Inc. Topic: N/ANext generation design software will support fully associative geometric and physics-based analysis models throughout the entire product life-cycle. Most current CAD systems directly support finite element systems, but use proprietary database formats that do not promote diverse tool use and may not exist throughout the entire product life-cycle. Model sharing in common practice has been limited t ...
SBIR Phase II 2001 National Aeronautics and Space Administration -
A Linear-Drive Pulse Tube Cooler for Applications Below 6K
SBC: ATLAS SCIENTIFIC Topic: N/AVarious planned NASA missions depend on the availability of reliable and efficient coolers that achieve temperatures below 6K. These coolers are needed as the upper stage for lower temperature coolers such as dilution refrigerators or adiabatic demagnetization refrigerators. Astronomical missions utilize such low temperatures to enhance infrared detector sensitivity and to cool optics. Low tempera ...
SBIR Phase II 2001 National Aeronautics and Space Administration -
Doodlebug- Miniature Detector for Chemicals and Microorganisms
SBC: BIOPRAXIS, INC. Topic: N/AN/A
SBIR Phase II 2001 National Aeronautics and Space Administration