You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Munition Effectiveness Modeling and Technology Integration Research

    SBC: ACTA, LLC            Topic: N/A

    A 24-month Phase II project is proposed to develop and implement models that capture the fidelity of high fidelity physics-based (HFPB) models in a fast-running format. It is anticipated that such models will be incorporated in certain modules of theModular Effectiveness/Vulnerability Assessment (MEVA) code developed for and currently used by the Air Force for assessing munitions effectiveness an ...

    SBIR Phase II 2001 Department of DefenseAir Force
  2. Low Cost Titanium Components for Armor and Structures

    SBC: ADVANCE MATERIALS PRODUCTS, INC            Topic: N/A

    In Phase I of the proposed program the term of ADMA Products Inc. Twinsburg, OH and the University of Idaho, Moscow, ID demonstrated the ability to produce low cost Ti-6A1-4V powder and are now evaluating plate produced via a powder metallurgy approach.Seven potentially low cost powder types were evaluated. (1) crushed Ti-6A1-4V machine turnings which were crushed after hydrogenation (2) crushed C ...

    SBIR Phase II 2001 Department of DefenseArmy
  3. Solid Freeform Fabrication of low cost, in situ, metallic foam components for high energy absorption applications

    SBC: Sensintel Inc.            Topic: N/A

    In the phase I program, Advanced Ceramics Research, Inc. (ACR) fabricated in situ metallic foams by using a unique water-soluble polymer blend and ACR's Extrusion Freeform Fabrication (EFF) method. When the green parts were heated for binder burnout, thebinder was found to foam and create uniform closed, high-aspect ratio porosity. The freeform fabrication also could create open porosity ranging f ...

    SBIR Phase II 2001 Department of DefenseArmy
  4. Extraction of Rocket Propellant Physical Properties Via Computed Tomography

    SBC: Aracor            Topic: N/A

    The objective of this SBIR project is to develop enhanced capabilities to evaluate solid rocket motors (SRMs) using x-ray computed tomography (CT) inspection. In Phase I, approaches were defined for developing technology to improve CT inspectioncapabilities. In Phase II, the technology will be developed and incorporated in practical tools to be delivered to OO-ALC at Hill AFB, where Air Force mi ...

    SBIR Phase II 2001 Department of DefenseAir Force
  5. Enhanced Hand-held Electromagnetic Induction Sensor for Landmine Detection

    SBC: AETC, INC.            Topic: N/A

    Currently available handheld mine detectors are effective in detecting metal mines and pieces of metal used in the firing mechanisms of non-metallic mines. However, these detectors can have a very high false alarm rate due to an inability to discriminatetargets, particularly the types and shapes of small metal-firing mechanism parts, and they are not effective at localizing small metallic targets ...

    SBIR Phase II 2001 Department of DefenseArmy
  6. Carbon Composites for Space Tribology

    SBC: Allcomp Inc.            Topic: N/A

    The intent of this Phase I effort was to examine the feasibility of using C-C composite for possible tribological applications in Space. In the Phase I effort, selected C-C composite materials were modified and tested for both high-speed bearing cage andslip ring/ brush applications under simulated space environments. 2D C-C cage materials were modified to reduce its pore size for lubricant retent ...

    SBIR Phase II 2001 Department of DefenseAir Force
  7. Intelligent Collision Detection and Warning System

    SBC: AMERICAN GNC CORPORATION            Topic: N/A

    Phase II designs, develops, and delivers Intelligent Collision Detection and Warning System to the U.S. Air Force. The proposed Phase II project is an extension of the Phase I project ¿¿Low Cost Autonomous GPS Based Collision Avoidance System¿¿, and acontinuation of AGNC's efforts in the development of advanced avionics systems and technologies for military and commercial applications. Each ai ...

    SBIR Phase II 2001 Department of DefenseAir Force
  8. Innovative Materials for Lightweight Armor

    SBC: Anacapa Sciences, Inc.            Topic: N/A

    The Phase II objective is to develop web-based training that increases Army officers' critical thinking ability. The need for such training was confirmed by the results of Phase I where it was shown that (1) critical thinking (CT) skills are important toBattle Command success, (2) poor CT performance creates serious problems for Command/Control, and (3) military curriculum does not train CT skill ...

    SBIR Phase II 2001 Department of DefenseArmy
  9. Lightweight Personal Protective Head Gear Communication System for the Dismounted Soldier

    SBC: Anacapa Sciences, Inc.            Topic: N/A

    The overall objective of the Phase II effort is to improve the Army aviator's ability to perform night missions by developing innovative symbols that capitalize on the advantages of new wide-field of view (WFOV) helmet-mounted displays (HMDs). We willbuild upon the successes of the Phase I effort, in which we identified more than 100 valuable new symbols through mission analyses, developed the sym ...

    SBIR Phase II 2001 Department of DefenseArmy
  10. MEMS Sensors For In-situ Monitoring of Adhesive Bonded Composite Structures

    SBC: ANALATOM INCORPORATED            Topic: N/A

    The problem addressed is through-life non-destructive monitoring of adhesivelybonded structures. The concept presented is to produce a

    SBIR Phase II 2001 Department of DefenseAir Force
US Flag An Official Website of the United States Government