List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. APA: Air Pressure Alert Device

    SBC: DESERT STAR SYSTEMS, LLC            Topic: 814

      For divers, out of air situations present a particular hazard. They can result in a dangerous emergency ascent, or failure of a diver to reach the surface. A low air pressure alert (APA) device can provide a valuable margin of safety, but careful design is required. In order for the device to be adopted, it must no t only be effective but it must offer ease of use and a strea ...

    SBIR Phase II 2010 Department of Commerce
  2. Phase-Stabilized 1-GHz Fiber-Laser Frequency Combs at 2~5um for Coherent Fourier Transform Spectroscopy

    SBC: AdValue Photonics Inc            Topic: N/A

    The GHz-rate phase-stabilized fiber-laser frequency comb system is proposed to be used as a light source for coherent Fourier transform spectroscopy. The system will be developed based on our proprietary glass/fiber technology, which features a low-cost, robust, highly stable, mid-infrared light source that enables the development of a robust portable c-FTIR spectrometer for absorption measurement ...

    SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology
  3. Comprehensive Residential Energy Monitoring System

    SBC: PHYSICAL OPTICS CORPORATION            Topic: N/A

    NIST needs a complete residential energy monitoring system to convey real-time comprehensive energy consumption data by particular end-use to occupants. POC developed a new Comprehensive Wireless Residential Energy Monitoring (CORE) system that integrates multiple wireless sensor modes with a unique radio board into an innovative wireless network architecture. Key Phase I developments were a first ...

    SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology
  4. Compact fs Fiber Laser Source for Broadband CARS Microscopy

    SBC: POLARONYX, INC.            Topic: N/A

    Based on our success in developing the world’s first commercial 10 W femtosecond fiber laser system and our leading technology development in ultrashort pulsed fiber laser, PolarOnyx proposes, for the first time, a compact high power dual band integrated fiber laser source. The integrated system will be the first extremely compact comprehensive system to address NIST’s current and futu ...

    SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology
  5. A Method for Specification of Efficeint and Effective Strategies for Measurement of a Measurement Article on a Coordinate Measuring Machine by Use of Measurement Simulation Techniques

    SBC: METROSAGE, L L C            Topic: N/A

    We propose the definition, design, and prototype development of a software tool for use by the U.S. manufacturing community to enable the automated production of design-based measurement strategies of know reliability and high economic efficiency for coordinate measuring machines (CMMs). The measurement strategies so generated will meet the objective of reducing overall costs to near-minimal value ...

    SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology
  6. Development of Pulse/DC Characterization System for LEDs

    SBC: Arroyo Instruments, LLC            Topic: N/A

    Development of LEDs for various applications, such a vehicle lighting, signage, and commercial and residential solid state lighting is progressing at a rapid pace. Various methods exist for measuring the performance of LEDs, but variations in test configurations, thermal management, T&M equipment, and operator experience lead to significant variation in measured performance. The project will d ...

    SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology
  7. Portable Active Damage Inspection (PADI) system for stress-corrosion cracks in aerospace structures

    SBC: ACELLENT TECHNOLOGIES, INC            Topic: AF073109

    Safety, reliability, and life-cycle cost are of great concern to the aging aircraft manufacturing and maintenance industries. Current maintenance and inspection techniques for in-service structures are labor-intensive and time-consuming. Acellent Technologies proposes to develop an accurate, reliable integrated system for detection, prediction and mitigation of aging and manufacturing related ha ...

    SBIR Phase II 2010 Department of DefenseAir Force
  8. Development of Cascading Sensor Layer Network for Corrosion Monitoring in Multilayered Aircraft Components

    SBC: ACELLENT TECHNOLOGIES, INC            Topic: AF083245

    Acellent Technologies, Inc. (Acellent) proposes to develop a reliable Cascading Sensor LAyer Network (CSLAN) based on Acellent’s SMART Layer® technology to detect and continuously monitor corrosion related damages. Multilayered metal structures in aircrafts are sometime subjected to very hostile environmental condition which are prone to develop stress corrosion cracks, pitting corrosion and ot ...

    SBIR Phase II 2010 Department of DefenseAir Force
  9. High Temperature Sensor Materials Optimization and Fabrication Methods

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: AF083079

    The purpose of this project is to demonstrate the feasibility of using an innovative, nanoparticle inkjet process for directly writing high temperature health monitoring sensors on turbine engine and thermal protection system components without the need for expensive sputtering, CVD, clean room or photolithography equipment. The inkjet process allows sophisticated sensor geometries and material co ...

    SBIR Phase II 2010 Department of DefenseAir Force
  10. Weapons Effects FRMs for Small Munitions on Urban Reinforced Concrete Walls/Slabs

    SBC: ACTA, LLC            Topic: AF083094

    A 24-month SBIR Phase II Project titled"Weapons Effects FRMs for Small Munitions on Urban Reinforced Concrete Walls/Slabs."The stated objective of this solicitation topic is to develop High-Fidelity Physics-Based (HFPB) Fast-Running Models (FRMs) for simulating the effects of small weapons in urban structures and materials. This proposal covers RC walls and slabs while an accompanying proposal co ...

    SBIR Phase II 2010 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government