You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. H-60 Mission Avionics Technology Insertion

    SBC: CPU TECHNOLOGY, INC.            Topic: N03031

    The objective of this proposal is to develop a preliminary brassboard implementation for an H-60 system and for the AN/ALE-47, and demonstrate the interfaces through simulated flight using the ADVAYK brassboard. All designs will be virtually simulated and validated to ensure the desired behavior of the existing system is captured. The designs for each of the three projects will be validated vir ...

    SBIR Phase II 2005 Department of DefenseNavy
  2. Synthesis of Energetic PrePolymers of Varying BAMO and NMMO or PGN Content and Structure

    SBC: FLUOROCHEM, INC.            Topic: N04111

    Composite propellants and explosives typically consist of solid oxidizers, metallic fuels, and rubbery binders that provide the needed mechanical properties. Most binder systems are cured by the formation of urethane linkages by the reaction of oligomeric diols with diisocyanates or triisocyanates. The availability of a variety of diols and isocyanates enables the formulation of binders with opt ...

    SBIR Phase II 2005 Department of DefenseNavy
  3. Silicon-Based Visible/Near-Infrared Affordable Missile Warning Sensor

    SBC: EDDY CO.            Topic: N03T020

    The proposed effort, in response to Office of Naval Research STTR Topic N03-T020, is to develop a prototype affordable visible/near-infrared missile warning sensor (AMWS), which uses conventional silicon based CCD technology as a detector. This sensor would ultimately form part of a Directed Infrared Counter-Measure (DIRCM) system designed to protect naval aircraft from anti-aircraft missiles. T ...

    STTR Phase II 2005 Department of DefenseNavy
  4. A Lightweight Crashworthy Troop Seat for Naval Helicopters that Protects Occupants of all Sizes and Gender

    SBC: SAFE INC            Topic: N04008

    This proposal outlines a program to continue the work begun in the Phase I effort. In the Phase I effort, a material search was conducted and the best available materials were selected for use. Load path and structural analyses were conducted and the lightest weight seat concept was developed. The differences required to enable the seat to be retrofit into the several different Navy helicopters ...

    SBIR Phase II 2005 Department of DefenseNavy
  5. Sonobuoy Launched small UAV system

    SBC: Sensintel Inc.            Topic: N04T004

    The Navy and other government-sponsored agencies use the P-3 aircraft. Due to the diverse missions and limited number of P-3 aircraft, the most economical and expeditious way to enhance operations and assure crew safety would be to incorporate low-cost expendable tactical unmanned air vehicles (UAV's). If UAVs were incorporated into each P-3, a load-out of sonobuoy launched UAV's with interchange ...

    STTR Phase II 2005 Department of DefenseNavy
  6. Real-time Multimedia Communications in Highly Mobile Networks.

    SBC: Sensintel Inc.            Topic: N/A

    Based on the success demonstrated in the Phase I programs, this Phase II program will transition AINS technology developed in the universities into various compelling demonstrations that demonstrate the robust advantages of AINS. In the four Phase Iprograms we were able to perform significant initial AINS technology

    STTR Phase II 2003 Department of DefenseNavy
  7. Technologies to Defeat Improvised Explosive Devices (IED’s)

    SBC: Sensintel Inc.            Topic: N04901

    The objective of the proposed development effort is to utilize a sensor which detects IEDs and detonation devices. The sensor detector is mounted on a small unmanned aerial vehicle (UAV) such that detection can be performed from a autonomous airborne platform ahead of a convoy or patrol, thereby reducing the risk of loss of life. A positive identification was achieved from a UAV approximately 75 ...

    SBIR Phase II 2005 Department of DefenseNavy
  8. Useful Life Remaining Models for Turbine Engine Hot Section Components

    SBC: ROTORDYNAMICS-SEAL RESEARCH            Topic: N03027

    A new integrated modeling and simulation capability is proposed to substantially improve the predictions of transient dynamic loads for gas turbine engines. These improved loads enable a improvement in the determination of useful life remaining for hot section components. This effort includes compiliation of the necessary software elements to generate a fully coupled, transient analysis for the ...

    SBIR Phase II 2005 Department of DefenseNavy
  9. Universal BIST/Prognostics Approach for Switch Mode Power Supplies

    SBC: RIDGETOP GROUP, INC.            Topic: N03197

    Providing effective Prognostics/Health Maintenance (PHM) capabilities is a key objective for the JSF. A key part of PHM includes electronic prognostics, where an impending failure in an electronic module can be predicted before it occurs and thus is very useful for such critical systems. Power converters are ubiquitous, but often are prone to unexpected failures in military systems. Using a com ...

    SBIR Phase II 2005 Department of DefenseNavy
  10. Detection of foreign materials in uncured hand layup composites

    SBC: Menon and Associates, Inc.            Topic: N04262

    Fiber-reinforced polymer prepreg materials are supplied in the form of tape, tow and fabric. During the cutting and lay-up processes, some of the backing material (release film) remains on the prepreg. Composite parts manufactured using such prepreg materials can fail since the backing material prevents a good bond between individual plies. Menon and Associates proposes to demonstrate a RF-bas ...

    SBIR Phase II 2005 Department of DefenseNavy
US Flag An Official Website of the United States Government