You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Annular Gas Jet Anode for Decade

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: DTRA04010

    Alameda Applied Sciences Corporation (AASC) proposes to replace the anode posts of a soft x-ray z-pinch with an azimuthally symmetric shell of high density, low atomic number gas. Once ionized, the gas column carries the current and eliminates particulate debris that is otherwise generated by the return rods. The gas shell also absorbs unwanted UV and hence eliminates the first Li foil filter of t ...

    SBIR Phase II 2006 Department of DefenseDefense Threat Reduction Agency
  2. Autonomous Self-powered (ASP) Structural Health Monitoring system

    SBC: ACELLENT TECHNOLOGIES INC            Topic: A04163

    Acellent Technologies has proposed to develop a self-powered structural health monitoring system for use in monitoring of mission critical structures such as missiles or combat vehicles in the field. The system will be completely autonomous having the capabilities for (1) Energy harvesting for self-power generation, (2) Integrated sensors for robustness, (3) Sensor self-calibration for improved re ...

    SBIR Phase II 2006 Department of DefenseArmy
  3. SMART Tape For Structural Health Monitoring of Rocket Engines

    SBC: ACELLENT TECHNOLOGIES INC            Topic: X601

    Acellent Technologies, Inc. proposes to develop a SMART Tape system that can be used to perform rapid non-destructive evaluation in real time and provide long-term monitoring of pressure vessels in liquid rocket engines. Based on Acellent's existing SMART Layer technology, this innovative system combines a sensor network, dedicated signal processing and data analysis software to allow for real-ti ...

    SBIR Phase II 2006 National Aeronautics and Space Administration
  4. Resistant Coatings for Aircraft Components

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: N04261

    The purpose of this project is to demonstrate the effectiveness of using specialized protective coatings for reducing the amount of wear on aircraft components, thereby extending their life. The goal is to extend their life by a factor of 10x.

    SBIR Phase II 2006 Department of DefenseNavy
  5. Refractory Coatings on Mechanically Resilient Insulators

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: AF05005

    The purpose of this Phase-II project is to build upon the promising results achieved during Phase-I, where it was shown that ceramic coatings raised the breakdown voltage and reduced the amount of damage and improved the recovery after a breakdown event for plastic insulators. The main goals of the Phase-II are to (1) coat actual insulators for the Shiva and HPM devices for testing, (2) to optimiz ...

    SBIR Phase II 2006 Department of DefenseAir Force
  6. Development of HFPB Debris Throw Models for Ordnance Storage and Handling Facilities

    SBC: ACTA, LLC            Topic: N06048

    Phase I showed the feasibility of developing of HFPB Debris Throw Models for Ordnance Storage and Handling Facilities using the Material Point Method (MPM) as implemented in Los Alamos' CartaBlanca code. In Phase II, a version of CartaBlanca will be installed on the Navy's supercomputer and be validated to simulate the debris thrown from a reinforced concrete (R/C) structure due to an uncased int ...

    SBIR Phase II 2006 Department of DefenseNavy
  7. Structure from Motion

    SBC: ACUITY TECHNOLOGIES, INC.            Topic: AF04170

    We propose to develop a superior 3D surface reconstruction algorithm that operates on monocular aerial video. High quality pose estimates from inertial data will be used to construct dense depth maps of the 3D environment. Each 3D pixel in the reconstruction will be extracted from multiple views in the redundant video stream to minimize the error in the reconstruction. We will refine and adapt the ...

    SBIR Phase II 2006 Department of DefenseAir Force
  8. Wing and Bomb Bay Launched (WBBL) Unmanned Air Vehicle (UAV)

    SBC: ACUITY TECHNOLOGIES, INC.            Topic: N05005

    The goal of the Acuity Wing and Bomb Bay Launched UAV Phase II program is demonstration of the feasibility and utility of an air vehicle organic to the P3 through development and flight testing of a prototype aircraft. Minimum objectives are runway takeoff, autonomous flight directed by a ground or air based control station through multiple waypoints over a radius of 10 miles or more, live video a ...

    SBIR Phase II 2006 Department of DefenseNavy
  9. Medicare Information Resource Center (MIReC)

    SBC: ACUMEN LLC            Topic: N/A

    The purpose of the project is to facilitate the acquisition and linking of data from the Centers for Medicare and Medicare Services (CMS) to participants of surveys and registries sponsored by NIA and relate federal agencies, and to promote the use of these data for research and public policy. The intent is to create an infrastructure that will reduce the expense and time required to obtain, creat ...

    SBIR Phase II 2006 Department of Health and Human ServicesNational Institutes of Health
  10. High-resolution tomography for small animal imaging

    SBC: ADELPHI TECHNOLOGY INC            Topic: N/A

    DESCRIPTION (provided by applicant): The goal of this proposal is to develop a nanometer-scale resolution computerized tomographic imaging system for small animal and molecular imaging. This will be achieved by building a system designed to work with x-ray compound refractive lenses. Research and development efforts will concentrate on the x-ray source, lens and detector as well as the constructi ...

    SBIR Phase II 2006 Department of Health and Human ServicesNational Institutes of Health
US Flag An Official Website of the United States Government