You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
N/A
SBC: ABRATECH CORPORATION Topic: N/AN/A
SBIR Phase II 2001 Department of Health and Human ServicesNational Institutes of Health -
High Efficiency Mid-Infrared Solid State Lasers
SBC: AC MATERIALS, INC. Topic: N/AAC Materials proposes development of a 4 micron Ho:BaY2F8 laser pumped by a Cr:LISAF laser in response to Air Force needs for an efficient pulsed source in the 3-5 micron region. Under the Phase I program lasing at 3.9 micron was demonstrated, with over 30mJ power per pulse. The Phase II effort will be optimization of this Ho laser. Crystal growth of Cr:LiSAF and Ho:BYF will be advanced to enable ...
SBIR Phase II 2001 Department of DefenseAir Force -
Cost Effective Processing Equipment for Large Composite Parts
SBC: ACCUDYNE SYSTEMS, INC. Topic: N/AReduced mass materials are critical to the success of aerospace systems. Thus, large air and space structures can benefit from lightweight composite materials. However, their adoption is impaired by the lack of a robust, cost-effective fabrication process, principally because the autoclaves used to consolidate composite laminates are so expensive for large parts. This program develops for US aeros ...
SBIR Phase II 2001 National Aeronautics and Space Administration -
Development of Intelligent Composites using Integrated SMART Layer Technology
SBC: ACELLENT TECHNOLOGIES INC Topic: N/AReliability and structural safety are major concerns in the design of next-generation space transportation and systems. Acellent Technologies, Inc. Proposes to develop and innovative, cost-effective and reliable built-in structural diagnostic system forlight-weight large-scale space structures made of composite materials to monitor their integrity during service thereby prolonging life span, red ...
SBIR Phase II 2001 Department of DefenseMissile Defense Agency -
Munition Effectiveness Modeling and Technology Integration Research
SBC: ACTA, LLC Topic: N/AA 24-month Phase II project is proposed to develop and implement models that capture the fidelity of high fidelity physics-based (HFPB) models in a fast-running format. It is anticipated that such models will be incorporated in certain modules of theModular Effectiveness/Vulnerability Assessment (MEVA) code developed for and currently used by the Air Force for assessing munitions effectiveness an ...
SBIR Phase II 2001 Department of DefenseAir Force -
N/A
SBC: 3dgeo Development Inc. Topic: N/AThis Small Business Innovation Research (SBIR) Phase II project will develop a seismic processing system that enables the delivery of leading-edge seismic services over the Internet and Intranets. Internet-based seismic processing (INSP) enables exploration companies to directly control their critical seismic imaging projects, without the need of purchasing and maintaining expensive hardware and s ...
SBIR Phase II 2001 National Science Foundation -
Large-Area, Low-Cost, High-Resolution X-ray Detector and Electron Amplifier
SBC: ADELPHI TECHNOLOGY INC Topic: N/AThis Phase I Small Business Innovation Research proposal will develop porous dielectrics as a low-cost, large-area detector for high spatial resolution x-ray detection. An alternative to microchannel plates, porous dielectric electron amplifiers are formed by a thin layer, generally less than 1 mm, of a low density dielectric. The microscopic pores formed in such material, provide a natural, but m ...
SBIR Phase II 2001 National Aeronautics and Space Administration -
Propulsion Improvements for Long Range Guns, Traveling Charge Concept
SBC: Adept Systems, Inc. Topic: N/AA network interface chip (NIC) that implements appropriateportions of the lower 2 layers of the ANSI 709.1 protocol(LonTalk) has been successfully designed and tested on aprogrammable logic device.This NIC has been successfullyinterfaced to a NetSilicon 32 bit ARM processor runningappropriate portions of the upper layers of the 709.1 protocol. Afeasibility demonstration was conducted successfully. ...
SBIR Phase II 2001 Department of DefenseNavy -
Universal Superconducting Magnets for MagLifter Launch Assist Sleds
SBC: Advanced Magnet Lab, Inc. Topic: N/ANASA is considering an electromagnetic catapult, the MagLifter to lowerthe cost of cargo delivery to space. A carrier sled levitated and propelledby magnets provides the initial velocity to a space transportation vehicle.Superconducting magnets enable higher fields at lower weights than normalconducting magnets and consequently a significantly larger clearancebetween the guideway and the carrier s ...
STTR Phase II 2001 National Aeronautics and Space Administration -
Heatpipe Power System (HPS) In-Space Fueling, A Simplified Approach
SBC: Advanced Methods & Materials (AMM) Topic: N/AA major objection to the use of nuclear energy for space applications is the perceived risk involved in the launching of a fully fueled nuclear reactor. Even when it is pointed out that the fuel is in fact not radioactive, concerns persist. It is acknowledged that to design a reactor able to withstand all conceivable launch accidents would result in an impractical heavy design. To avoid the above ...
SBIR Phase II 2001 National Aeronautics and Space Administration