For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. N/A


    This SBIR Phase II program will demonstrate prototype galvanic isolating devices of high-speed/low-power by incorporating high-speed magnetic films into giant magnetoresistive structures and by combining with high-speed IC electronics. The new devices will have five important improvements over existing devices, a factor of 10 faster, without a drive IC chip, a flip-chip approach, a lower supp ...

    SBIR Phase II 2001 Department of Commerce
  2. Computational Modeling of Remelting Processes for Ingot Casting of High-Performance Alloys

    SBC: INNOVATIVE RESEARCH, INC.            Topic: N/A

    The overall goal of the proposed research is to develop a comprehensive, efficient, and well validated model of various remelting processes used for the production of ingots of superalloys and titanium alloys. Phase I research has demonstrated thefeasibility and the validity of developing a unified computational model for efficient and accurate prediction of AC and DC electromagnetics, fluid flow, ...

    SBIR Phase II 2001 Department of DefenseAir Force
  3. High Speed Digital Bus Isolator for Space


    NVE will produce and package IC's that monolithically integrate high speed GMR signal isolators into prototype high-speed 74245 type transceivers and 74573 type logic latches. Commercial high-speed data bus interfaces between microcontroller basedsubsystems have not been galvanically isolated due to performance, size and cost constraints. These interfaces would benefit from the inclusion of mono ...

    SBIR Phase II 2001 Department of DefenseAir Force
  4. NDI for Diffusion Bonded Components


    It is proposed to use spin dependent tunneling (SDT) and giant magnetoresistance (GMR) magnetic sensors and eddy current techniques for Non-Destructive Inspection (NDI) to detect flaws in various metallic components including cracks around rivet holes andfailed bonds in diffusion bonded components. This Phase II proposal is directed towards designing, optimizing, manufacturing, and demonstrating s ...

    SBIR Phase II 2001 Department of DefenseAir Force
  5. High Accuracy, Automated Satellite Surveillance Network

    SBC: Oceanit Laboratories, Inc.            Topic: N/A

    Oceanit has successfully shown in Phase I that highly accurate (sub-arcsecond) observations are obtainable utilizing a relatively low-cost COTS system. These highly accurate angular observations can be introduced into the orbit determination process as asupplement to high-quality range data. These improved angular observations help resolve the geometric ambiguity of range-only orbit determinatio ...

    SBIR Phase II 2001 Department of DefenseAir Force
  6. InAs/GaInSb Superlattice for Very Long Wavelength Infrared Applications


    GaInSb/InAs superlattices show great promise as materials for use in very long wavelength infrared (VLWIR) detectors. This III-V compound offers advantages over current HgCdTe technology in both anticipated performance level and ancillary support system(e.g. cryogenic cooling) costs. Due to its piezoelectric characteristic, (111)-oriented superlattice lowers the effective bandgap energy when com ...

    SBIR Phase II 2001 Department of DefenseAir Force
  7. Development of Specific Pathogen Free (SPF) Penaeus monodon Broodstock for High Health and High Performance

    SBC: High Health Aquaculture, Inc. (HHA)            Topic: N/A

    Shrimp farming is the world's most valuable aquaculture sector with 1994 production of 733,000 MT and crop value of $4 billion. This huge industry depends on wild animals with its seedstock either gathered directly from the sea or produced in hatcheries from wild-caught broodstock. Recently the industry has experienced severe disease problems which in part are due to its reliance on wild animals ...

    SBIR Phase II 1996 Department of Commerce
  8. A GaN-A1GaN CCD for UV Imaging Applications

    SBC: Apa Optics, Inc.            Topic: N/A

    We propose a unique GaN-Al(sub x)Ga(sub 1-x)N heterojunction based CCD for imaging in the ultraviolet (wavelengths less than 365 nm). Our proposed device will be solid state, TTL compatible and in it's final configuration solar blind. The Phase I program is aimed at establishing the technical feasibility of our device concept. Our proposed CCD is in essence a GaN-AlGaN gated photoconductor with ...

    SBIR Phase II 1996 Department of DefenseAir Force
  9. HEMT and HBT Process Design

    SBC: Gateway Modeling, Inc            Topic: N/A

    This effort will address five problems in the process design of heterojunction bipolar transistors (HBTs) and high electron mobility transistors (HEMTs): (1) HEMT thermal impedances will be measured using a novel method and will be compared with finite-element simulations to provide more accurate values for computer-aided design programs. (2) The role of the spacer layer in HEMT performance and ...

    SBIR Phase II 1996 Department of DefenseAir Force
  10. Missing Title

    SBC: Oceanit Laboratories, Inc.            Topic: N/A


    SBIR Phase II 1996 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government