List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Innovative Materials for Highly Loaded Wear Application in Arresting Gear Tailhook Components

    SBC: QUESTEK INNOVATIONS LLC            Topic: N093175

    Ferrium M54 is an ultrahigh-strength, high, toughness steel with high resistance to grinding burn damage, and stress corrosion cracking, which provides many technical and commercial benefits for use in the F-18 E/F/G hook point application over the incumbent 4330V steel. The technical advantages for risk mitigation, while extending the component life at approximately the same cost makes for a good ...

    SBIR Phase II 2018 Department of DefenseNavy
  2. Affordable Manufacturing of Refractory Metal Components

    SBC: SCIAKY, INC.            Topic: N142125

    The primary objective of this SBIR initiative is to develop, demonstrate, and validate new manufacturing technologies. The focus is complex parts made from refractory metals manufactured at reduced costs and increased fabrication rates. The target components are for use in post-boost control system (PBCS) hot-gas valves and manifolds. Emphasis on and addressing scale up for fabrication of full-sca ...

    SBIR Phase II 2018 Department of DefenseNavy
  3. Certification Modeling for Composites with Voids and Wrinkles for Engines and Structures

    SBC: ADVANCED COMPUTATIONAL TECHNOLOGY, LLC            Topic: AF161129

    This proposal aims at developing a material agnostic modeling and analysis capability to help understand the genesis of voids and wrinkles during the processing and curing of fibrous composites. It also develops a hierarchical framework to investigate the effects of these micromechanics defects on the interlaminar strength and fatigue life of curved composite structures. The overall effort is cate ...

    SBIR Phase II 2018 Department of DefenseAir Force
  4. Extended Short-Wavelength Infrared (SWIR) Focal Plane Arrays (FPA) for Hyperspectral Imaging

    SBC: NOUR, LLC            Topic: A16042

    Hyperspectral imaging at full short- and extended short-wavelength infrared spectral band (0.92.5 m) has important military applications. When used for imaging, a SWIR camera can operate at night using light reflected off the subject in the scene, generating high resolution images with details such as shadows and surface roughness. Compared to thermal infrared imaging, SWIR images look more like v ...

    SBIR Phase II 2018 Department of DefenseArmy
  5. Surface Haptic Technology for Geospatial Display

    SBC: TANVAS, INC.            Topic: A15049

    The goal of this development effort is to provide warfighters with inexpensive methods to view geospatial intelligence information on a hand-held tablet through their sense of touch. This allows eyes-free and silent operation without generating light. This proposal deals with two surface haptic display technologies. Variable-friction displays create haptic effects by varying the coefficient of fri ...

    SBIR Phase II 2018 Department of DefenseArmy
  6. Colloidal Quantum Dots for Cost Reduction in EO/IR Detectors for Infrared Imaging

    SBC: Episensors, Inc.            Topic: A17029

    Technical Abstract (200 word limit):While state-of-the-art microbolometers demonstrate impressive capabilities for low-cost uncooled long-wavelength infrared (LWIR) imaging, there is currently a need for low-cost, mid-wavelength infrared (MWIR) imaging systems capable of high performance with fast frame rates at high operating temperatures. HgTe colloidal quantum dot (CQD) focal plane arrays (FPAs ...

    SBIR Phase II 2018 Department of DefenseArmy
  7. Computational Tools to Enable Development of Alloys and Coatings for Advanced Gas Turbine Engines

    SBC: QUESTEK INNOVATIONS LLC            Topic: N162128

    QuesTek Innovations LLC, a leader in the field of Integrated Computational Materials Engineering (ICME), proposes to develop an ICME analysis tools involving Bayesian analysis, variance analysis, uncertainty management and database comparison and assessment functionalities to address the issue of database and model quality. QuesTek will apply the computational tool to improve databases and models ...

    SBIR Phase II 2018 Department of DefenseNavy
  8. Adaptive MPI: Providing Dynamic RTS Support for Large-scale MPI Applications

    SBC: CHARMWORKS, INC.            Topic: 02b

    High Performance Computing technology has advanced significantly. Advanced parallel computers are being built, with DOE leadership. Yet, the American engineering/manufacturing industry has not leveraged parallel computing at a significant level, partly because of the challenging nature of modern simulation software. US competitiveness in manufacturing may suffer due to its ineffective utilization ...

    SBIR Phase II 2018 Department of Energy
  9. Development and Commercialization of Novel Two-Color X-ray Photon Counting Pixel Array Detector

    SBC: RAYONIX, LLC            Topic: 09a

    Advanced new and upgraded synchrotron X-ray beamlines and sources are being constructed worldwide, and these facilities require fast new X-ray detectors to complement them and foster new scientific applications. In particular, new detector capabilities are desirable in the time domain, for the study of fast material and molecular kinetics, in the intensity domain for keeping up with brighter X-ray ...

    SBIR Phase II 2018 Department of Energy
  10. CALPHAD in the Cloud

    SBC: QUESTEK INNOVATIONS LLC            Topic: 13a

    In this Phase II SBIR program, QuesTek Innovations LLC, a leader in the field of integrated computational materials engineering (ICME), proposes to develop a methodology and software suite for applying Bayesian statistics to fit CALculation of PHAse Diagrams (CALPHAD)-based thermodynamic databases to quantify, store, and propagate the uncertainty in the chemical thermodynamic models. QuesTek will ...

    SBIR Phase II 2018 Department of Energy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government