List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. SBIR Phase II: Universal electronic platform and system for rapid (direct from sample) phenotypic Antibiotic Susceptibility Testing (AST)

    SBC: Impedx Diagnostics Inc.            Topic: BM

    This SBIR Phase I project addresses the need to reduce the time associated with conducting tests currently used to establish targeted antibiotic (and dose) to treat infections. Sepsis and septic shock are one of the leading contributors to death in US Hospitals, responsible for 250,000 deaths annually (estimated at 30-50% of all hospital deaths). To combat these high death rates, time is of the es ...

    SBIR Phase II 2018 National Science Foundation
  2. Over-the-Wire Device for Immediate and Complete Peripheral Artery Occlusion

    SBC: Metactive Medical, Inc.            Topic: NHLBI

    ABSTRACT Metactive Medical is developing the Blockstent Microcatheteran innovative medical device for endovascular occlusion of peripheral arteries and veinsThe device uses an expandabledetachablegold metal balloon that can be delivered using a highly flexiblelow profileover thewire microcatheteraddressing an unmet medical need for a device that is easy to use and delivers immediatecompleteand las ...

    SBIR Phase II 2018 Department of Health and Human Services
  3. Development of an Osteoinductive Spinal Fusion Implant for Enhanced Fusion Rates

    SBC: Evoke Medical, LLC            Topic: NIAMS

    PROJECT SUMMARY The objective of this Phase II SBIR is to test the safety and efficacy of an osteoinductive lumbar spinal fusion implant in an ovine modelIn preliminary worklower impedance piezoelectric materials that generate power for direct currentDCelectrical stimulation applications were manufactured and electromechanically characterizedIn an osteoinductive spinal fusion implant designan insu ...

    SBIR Phase II 2018 Department of Health and Human Services
  4. Development of a GABA Enzyme for Biosensor Applications

    SBC: Pinnacle Technology, Inc.            Topic: 101

    Abstract As the most important inhibitory neurotransmitter in the braina detailed understanding of the implications of gamma aminobutyric acidGABArelease remains elusiveThe measurement of GABA concentrations is a difficult processMicrodialysis is the current standard for GABA sampling in the brains of freely moving animalsbut suffers from low temporal resolution and the need for labor intensive an ...

    SBIR Phase II 2017 Department of Health and Human Services
  5. ExtruMach-Mill

    SBC: Fairmount Technologies LLC            Topic: DLA152001

    Fairmount Technologies (FT) has demonstrated that ExtruMach is a disruptive technology for drilling curved extrusions and proposes to further develop this during Phase II for milling extrusions. ExtruMach-PoCM (proof of concept machine) is a flow-type multi-axis CNC machine with a small footprint, which is more capable than existing machines in that it has no limit on the length of parts it can ha ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  6. Portable System with Li Foil MWPC Neutron Detectors

    SBC: Radiation Detection Technologies, Inc.            Topic: DTRA14B005

    At the completion of the research and development effort a Li-foil multi-wire proportional counter (MWPC) neutron detector with more than 625-cm2 of active area will be included in a portable radiation detection system. The system is expected to outperform the standards set by the ANSI N42.53 standards, and gamma-ray rejection ratio (GRR) of 1.0x10-8 or better. A gamma-ray spectrometer for isotope ...

    STTR Phase II 2017 Department of DefenseDefense Threat Reduction Agency
  7. Advanced Silicon Diode Switch for HPRF Systems

    SBC: Radiation Detection Technologies, Inc.            Topic: N15AT023

    The ultimate goal of the phase II effort is to build Si-based PCSS 10kV-modules and compare coupling of those modules to different microwave radiation technologies. The microwave radiating technologies include at least non-linear transmission lines and direct drive antenna; comparisons and system-level tradeoffs will be identified through normalized field measurements.

    STTR Phase II 2017 Department of DefenseNavy
  8. Chemical Biological Radiological Nuclear and Explosives (CBRNE) Reconnaissance Sampling Kit

    SBC: Ansera Analytics            Topic: A15048

    Military doctrine identifies a current and persistent need for initial and ongoing surveillance of tactical environments to detect, identify, and catalogue the prevalence and distribution of CBRNE hazards. The US Army depends on a collection of tools known as the Dismounted Reconnaissance Sets, Kits, and Outfits (DR SKO) for assess current threats. This collection kit has shortcomings, identified ...

    SBIR Phase II 2017 Department of DefenseArmy
  9. Collision-Avoidance Radar for Small UAS

    SBC: UAVradars LLC            Topic: A202

    In the near future unmanned aircraft systems (UAS) will be utilized for many societal and commercial applications. However, the hurdle of operation safety in the form of avoiding airborne collisions must first be overcome. UAVradars LLC is proposing a small, lightweight, and low-power radar system designed specifically to give small UAS (< 55 lbs) airborne collision-avoidance sensory capability. ...

    SBIR Phase II 2016 National Aeronautics and Space Administration
  10. Switching Electronics for Space-Based Telescopes with Advanced AO Systems

    SBC: Sunlite Science & Technology, Inc            Topic: S201

    A 32x32-channel multiplexing Application Specific Integrated Circuit (ASIC) driver, which can hold a voltage signal with a 16-bit resolution or beyond, is proposed. Such a driver will greatly reduce the operation power, and are compact and reliable. When the ASIC driver is vertically integrated with a Deformable Mirror (DM), the potential wiring failure will be eliminated. Furthermore, radiation r ...

    SBIR Phase II 2016 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government