List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Biologically-Derived Targeted Antifungals for Textile Applications

    SBC: Antimicrobial Materials, Inc.            Topic: A17018

    Fungal skin infections plague active duty servicemembers at elevated rates due to exposure to warm, humid climates, poor skin hygiene, and close-quarters living arrangements. We have developed a novel solution that incorporates an endophytic fungal extract with selective activity against Trichophyton species of pathogens. In addition, the selected compound has negligible impact on the organisms th ...

    SBIR Phase II 2019 Department of DefenseArmy
  2. SBIR Phase II: Universal electronic platform and system for rapid (direct from sample) phenotypic Antibiotic Susceptibility Testing (AST)

    SBC: Impedx Diagnostics Inc.            Topic: BM

    This SBIR Phase I project addresses the need to reduce the time associated with conducting tests currently used to establish targeted antibiotic (and dose) to treat infections. Sepsis and septic shock are one of the leading contributors to death in US Hospitals, responsible for 250,000 deaths annually (estimated at 30-50% of all hospital deaths). To combat these high death rates, time is of the es ...

    SBIR Phase II 2018 National Science Foundation
  3. Over-the-Wire Device for Immediate and Complete Peripheral Artery Occlusion

    SBC: Metactive Medical, Inc.            Topic: NHLBI

    ABSTRACT Metactive Medical is developing the Blockstent Microcatheteran innovative medical device for endovascular occlusion of peripheral arteries and veinsThe device uses an expandabledetachablegold metal balloon that can be delivered using a highly flexiblelow profileover thewire microcatheteraddressing an unmet medical need for a device that is easy to use and delivers immediatecompleteand las ...

    SBIR Phase II 2018 Department of Health and Human Services
  4. Development of an Osteoinductive Spinal Fusion Implant for Enhanced Fusion Rates

    SBC: Evoke Medical, LLC            Topic: NIAMS

    PROJECT SUMMARY The objective of this Phase II SBIR is to test the safety and efficacy of an osteoinductive lumbar spinal fusion implant in an ovine modelIn preliminary worklower impedance piezoelectric materials that generate power for direct currentDCelectrical stimulation applications were manufactured and electromechanically characterizedIn an osteoinductive spinal fusion implant designan insu ...

    SBIR Phase II 2018 Department of Health and Human Services
  5. All Solid-State Batteries for Navy Applications

    SBC: NanoCoatings, Inc.            Topic: N162092

    The U.S. Navy requires reliable all-solid-state batteries (ASSB) with solid electrolytes to enhance their performance and safety. The novelty of the proposed study by NanoCoatings, Inc. (NCI) is the use of Magnetron Sputtering Physical Vapor Deposition (MS PVD) to manufacture thin, dense electrolyte layers of lithium-ion conductor and multiple cathode layers to provide high levels of ionic and ele ...

    SBIR Phase II 2018 Department of DefenseNavy
  6. In Situ Structural Repair and Protection of LWR Components Using Cold Spray

    SBC: VRC Metal Systems, LLC            Topic: 10c

    A major problem facing the existing U.S. fleet of Light Water Reactor facilities is stress corrosion cracking of austenitic nickel and iron alloys, which comprise the bulk of wetted components in LWR facilities; up to 70% of wetted non-fuel areas in a typical facility, making this problem particularly widespread and especially prevalent with extended service life. Cold spray technology offers an e ...

    SBIR Phase II 2018 Department of Energy
  7. Development of a GABA Enzyme for Biosensor Applications

    SBC: Pinnacle Technology, Inc.            Topic: 101

    Abstract As the most important inhibitory neurotransmitter in the braina detailed understanding of the implications of gamma aminobutyric acidGABArelease remains elusiveThe measurement of GABA concentrations is a difficult processMicrodialysis is the current standard for GABA sampling in the brains of freely moving animalsbut suffers from low temporal resolution and the need for labor intensive an ...

    SBIR Phase II 2017 Department of Health and Human Services
  8. ExtruMach-Mill

    SBC: Fairmount Technologies LLC            Topic: DLA152001

    Fairmount Technologies (FT) has demonstrated that ExtruMach is a disruptive technology for drilling curved extrusions and proposes to further develop this during Phase II for milling extrusions. ExtruMach-PoCM (proof of concept machine) is a flow-type multi-axis CNC machine with a small footprint, which is more capable than existing machines in that it has no limit on the length of parts it can ha ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  9. Cold Spray Repair Process Development and Implementation on Navy Components

    SBC: VRC Metal Systems, LLC            Topic: N151052

    US Navy vessels and their components and equipment experience severe environmental conditions, leading to a level of unacceptable corrosion through a combination of sea water exposure, heat, humidity, UV exposure, and general inaccessibility for continual maintenance. Copper brush electroplating is the standard repair technique for many Navy corrosion repair applications, however this process is p ...

    SBIR Phase II 2017 Department of DefenseNavy
  10. Solid State Additive Manufacturing of Titanium Alloys Using Cold Spray

    SBC: VRC Metal Systems, LLC            Topic: A16AT002

    The US Army needs a method for large scale repair and additive manufacture of Ti-6Al-4V components in support of its light weighting initiative. Cold spray metal deposition technology is a solid-state bonding technique where supersonic powdered metal is deposited on a metallic substrate through adiabatic shearing processes at low temperature. Cold spray offers an ideal solution for the Armys need ...

    STTR Phase II 2017 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government