Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Phosphorous-Containing Epoxy Resins for Room Temperature VARTM

    SBC: Adherent Technologies, Inc.            Topic: N06T017

    The Navy intends to start using a significant quantity of composite structures in surface ship construction in an effort to decrease costs as well as to reduce the visibility of the ships to radar. The large size of the target structures necessitates the use of low temperature, non-autoclave processing techniques such as Vacuum Assisted Resin Transfer Molding (VARTM). In the recent past, most m ...

    STTR Phase I 2006 Department of DefenseNavy
  2. MEMS-Based Aero-optics Simulator System

    SBC: AGILOPTICS            Topic: AF06T030

    This effort joins the MEMS-based deformable mirror technology available from AgilOptics, a New Mexico small business, with the aero-optics technology of the University of Notre Dame to develop an Aero-optics Simulator. This simulator will develop a library of aero-optics patterns to simulate atmospheric distortions for test and evaluation of military or commercial beam control systems.

    STTR Phase I 2006 Department of DefenseAir Force
  3. Development of Lightweight and Low Cost Advanced Structural Materials for Off-board Surface Vessels (OBVs)

    SBC: Applied Physical Sciences Corp.            Topic: N06T021

    Off-board vehicles deployed in littoral environments are subjected to severe operational loads, including wave slamming, high-speed collision with debris, and underwater explosions. They additionally serve as sensor platforms, and would benefit from reduced self- and radiated noise for towed array performance and mine defense. Consequently, we propose to exploit the flexibility of design offered ...

    STTR Phase I 2006 Department of DefenseNavy
  4. High-throughput Direct Structural Screening for Drug Lead Compounds

    SBC: Icagen, Inc.            Topic: A06T032

    U.S. Government personnel deployed in tropical and neotropical regions continue to be at risk for developing malaria. Drug resistant malaria parasites are becoming more common in these areas, increasing the risk of American personnel developing a serious, life-threatening disease. Cross resistance between drugs is becoming much more common. Due to the emergence of drug resistance, derivates of k ...

    STTR Phase I 2006 Department of DefenseArmy
  5. Miniature Electronic Sniffer for Navy Vertical Take off Unmanned Aerial Vehicles (VTUAVs)

    SBC: Connecticut Analytical Corporation            Topic: N06T010

    The use of Unmanned Aerial Vehicles (UAVs) in warfare, reconnaissance, and surveillance activities has increased dramatically over the past decade and, for the first time, offers cost effective, intelligence-gathering capabilities without placing soldiers and sailors at unnecessary risk. Current UAV platforms have already been equipped with a limited range of sensors such as miniature audiovisual ...

    STTR Phase I 2006 Department of DefenseNavy
  6. Polymer Based, Thermally Conductive and Erosion Resistant Boot Materials/Concepts for Rotor Blade Leading Edge Protection

    SBC: HONTEK CORP.            Topic: N06T013

    The leading edge of the V-22 rotor blade is made of titanium and nickel abrasion strips bonded to the composite substrate. Although effective for rain erosion protection, nickel and titanium show poor sand erosion resistance. In addition, this metal and composite hybrid configuration limits working strain and fatigue life. This hybrid concept also hampers field serviceability and increases the ...

    STTR Phase I 2006 Department of DefenseNavy
  7. Online Treatment of Subretinal Neovascular Membranes from Laser Eye Injury

    SBC: ORION International Technologies, Inc.            Topic: A06T030

    The eye is extremely sensitive to laser radiation and can be permanently damaged from direct or reflected beams. In the military environments, laser injuries may be a result of battlefield laser rangefinders, target designators, or enemy action. Individuals involved in high energy laser research or medical therapeutic lasers are also at risk from direct and reflected laser radiation. One possible ...

    STTR Phase I 2006 Department of DefenseArmy
  8. Aircraft Electrical Power System Diagnostics and Health Management

    SBC: QUALTECH SYSTEMS, INC.            Topic: N06T007

    This proposal is a joint effort between Qualtech Systems, Incorporated (QSI), the Institute for Software Integrated Systems at Vanderbilt University (VU), and Hamilton Sundstrand (HS) in Rockford, IL. QSI and VU have the combined knowledge and experience in successful development of a novel solution to aircraft system and subsystem prognostics and maintenance tools and have developed state-of-the- ...

    STTR Phase I 2006 Department of DefenseNavy
  9. Fault Diagnostics, Prognostics, and Self-Healing Control of Navy Electric Machinery

    SBC: QUALTECH SYSTEMS, INC.            Topic: N06T033

    The objective of this project is to develop an integrated condition monitoring, fault diagnostics and prognostics scheme for power electronic converters and electromechanical devices, e.g., advanced induction motors, specifically targeting the DD(X) platform and subsequently expanding the scope for addressing the needs of other defense-related and commercial applications. An additional goal of th ...

    STTR Phase I 2006 Department of DefenseNavy
  10. Targets for RADAR Calibration and Test of Advanced Discrimination Technologies and Concepts

    SBC: Qynergy Corporation            Topic: MDA05T005

    Qynergy Corporation proposes to develop a unique power system for space targets for RADAR calibration and test of advanced discrimination technologies and concepts. There is a need for well-characterized cooperative space targets that can decrease reliance on expensive BMDS integrated flight tests. The space target system would consist of at least 2 objects: a cone of approximately 1-m diameter, ...

    STTR Phase I 2006 Department of DefenseAir Force
US Flag An Official Website of the United States Government