You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Novel Materials In-Situ Ablation and Thermal Sensing

    SBC: KAI, LLC            Topic: AF10BT04

    ABSTRACT: The objective of this project is to design and fabricate multi-signal in-situ ablation sensors based on an acoustic transducer system, thermal measurement system (i.e., either photonic technology or in-situ thermal sensors based on ultra small thermocouples), and fast inverse heat transfer algorithms. This project will use the following approaches: Utilize commercially available opt ...

    STTR Phase I 2012 Department of DefenseAir Force
  2. Advanced Antireflective Coatings for Polycarbonate Lenses

    SBC: NANOHMICS INC            Topic: AF10BT19

    ABSTRACT: Robust optical coatings are of great importance across a broad spectrum of applications. Hard, durable, stress-free coatings are needed and used in everything from ophthalmic polymers to infrared optics. One of the principal shortcomings of typical inorganic oxide, nitride, and sulfide coatings when applied to polymeric substrates is the large difference in the coefficient of thermal ...

    STTR Phase I 2012 Department of DefenseAir Force
  3. Conformal Hybrid Organic/Inorganic Antireflective Coatings

    SBC: ZT Solar, Inc            Topic: AF10BT19

    ABSTRACT: The objective of this STTR Phase I proposal is to investigate the feasibility of a hybrid organic/inorganic gradient index anti-reflective (GRIN-AR) coating on both rigid and flexible substrates, based on the resonant infrared matrix assisted pulsed laser evaporation (RIR-MAPLE) process. The hybrid organic/inorganic material approach enables both optical index control, as well as mechan ...

    STTR Phase I 2012 Department of DefenseAir Force
  4. Thermally Responsive Energy Storage- Phase Change Materials encapsulated in Carbon Foam- Ultrathin Graphene based Thermal Energy Storage Device

    SBC: Graphene Materials LLC            Topic: AF10BT32

    ABSTRACT: The work proposed involves the design and prototype concept creation of a high-performance thermal energy storage device (TES) based on graphene/ultrathin graphite and organic phase change materials. To achieve these goals, the following specific tasks will be accomplished: 1. Fabrication and design: use of emerging fabrication processes to develop a sub-scale three-dimensional struc ...

    STTR Phase I 2012 Department of DefenseAir Force
  5. High Performance Electric-Field Sensor Based on Enhanced Electro-Optic Polymer Refilled Slot Photonic Crystal Waveguides

    SBC: OMEGA OPTICS, INC.            Topic: AF11BT01

    ABSTRACT: In this program, we propose to develop a miniaturized Electromagnetic (EM) wave sensor based on defect engineered slotted photonic crystal waveguide (PCW) Mach Zehnder interferometer (MZI). EO polymers with large EO coefficient (r33>150pm/V) will be designed and synthesized to refill the slot PCW in order to take advantage of high field concentration in the narrow slots. Band engineered ...

    STTR Phase I 2012 Department of DefenseAir Force
  6. Low-Cost, High-Throughput Roll-to-Roll Printing of Integrated Photonic Devices on Flexible Substrates via a Combination of Nanoimprinting and Ink-Jet

    SBC: OMEGA OPTICS, INC.            Topic: AF11BT05

    ABSTRACT: In this program, Omega Optics, Inc., in collaboration with the University of Michigan Ann Arbor and the University of Texas at Austin, proposes low-cost, high-throughput roll-to-roll (R2R) printing of integrated photonic devices by using a high-rate R2R ink-jet printing system in conjunction with a high-rate R2R nanoimprint lithography (R2RNIL) system and demonstrate fabrication of pho ...

    STTR Phase I 2012 Department of DefenseAir Force
  7. Plasma Simulation from Two-Fluid to MHD in Complex Geometry Using Local Relaxation

    SBC: NumerEx            Topic: AF11BT08

    ABSTRACT: Multidimensional simulation of plasmas will be critical to the design of high voltage and high energy density devices over coming decades. Individual fluid simulation codes are presently limited to one or perhaps two of three plasma models: the higher densities and longer time scales of magnetohydrodynamics (MHD), the lower densities and shorter time scales of extended MHD (XMHD), and ...

    STTR Phase I 2012 Department of DefenseAir Force
  8. Simulation Software for Strongly Coupled Plasmas

    SBC: VOSS SCIENTIFIC LLC            Topic: AF11BT23

    ABSTRACT: We propose to develop and validate a strongly-coupled non-equilibrium plasma simulation model. Strongly coupled plasmas occur in a wide range of physical situations impacting a wide range of research and development areas connected to Air Force technology. The simulation model proposed here is based on the particle-in-cell (PIC) methodology, which has recently been validated by the pro ...

    STTR Phase I 2012 Department of DefenseAir Force
  9. Cellular elements for ensemble based programmable matter

    SBC: TECHFLOW SCIENTIFIC            Topic: AF11BT26

    ABSTRACT: TechFlow Scientific, a division of TechFlow Inc., along with its teaming partner, the University of New Mexico, is pleased to propose a three-phased research and development effort for the design, development, fabrication, and testing of miniaturized functional cellular elements that can be incorporated into an ensemble based mesoscopic framework. The TechFlow team comprises leading sci ...

    STTR Phase I 2012 Department of DefenseAir Force
  10. Metamaterial-Based MEMS Compact Phase Shifters

    SBC: MEMTRONICS CORPORATION            Topic: AF11BT28

    ABSTRACT: The main objective of this project is to design metamaterial-based MEM phase shifters, and to enable their application in phased-array radar and communications systems. A compact, low-loss, low-power-consumption, and non-dispersive Ka-band 4-bit phase shifter is chosen as the demonstration vehicle. To determine the feasibility of the overall project, the objective during Phase I will be ...

    STTR Phase I 2012 Department of DefenseAir Force
US Flag An Official Website of the United States Government