You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Damage Identification Algorithms for Composite Structures

    SBC: Aerobotix, Inc.            Topic: AF06097

    The development of a non-contact measurement system is of particular importance to implementing an automated method for thickness measurement of critical coatings on internal/external aircraft composite structures. The objective of the proposed research project is to continue development of a non-contact measurement technology and produce a fully functional prototype device for use in robotic app ...

    SBIR Phase II 2008 Department of DefenseAir Force
  2. Automated Sanding of Aircraft Coatings

    SBC: Aerobotix, Inc.            Topic: AF071112

    The development of a robotic sanding system is of particular importance to implementing an automated method for sanding critical, high performance coatings to final thickness and surface finish requirements on internal/external aircraft composite structures. The objective of the proposed research project is to continue development of robotic sanding technology and produce a fully functional proto ...

    SBIR Phase II 2008 Department of DefenseAir Force
  3. Field Repair of Localized Damage on Dynamic Rotorcraft Components.

    SBC: AVION SOLUTIONS, INC.            Topic: A07009

    U.S. Army helicopter fatigue sensitive dynamic components are required to maintain structural integrity throughout their operational life cycle. Typical metal alloy fatigue sensitive dynamic components require the presence of surface compressive residual stresses to inhibit the initiation and propagation of fatigue cracks. However, some of these components are susceptible to localized mechanical ...

    SBIR Phase II 2008 Department of DefenseArmy
  4. Biologic Event Identification and Geolocation Unattended Ground Sensor

    SBC: STREAMLINE AUTOMATION LLC            Topic: SOCOM06018

    The DoD Chemical, Biological, Radiological, and Nuclear Defense Program Performance Plan discusses the status of sensing technologies and long-term goals, and shows point biological detection systems are expected to provide 20% of the objective capabilities in FY15. This indicates that there is the need for a man-portable, disposable, rapidly responding biological agent point detector that is capa ...

    SBIR Phase II 2008 Department of DefenseSpecial Operations Command
  5. Configurable Dynamic Strain System

    SBC: STREAMLINE AUTOMATION LLC            Topic: AF071344

    The AEDC Engine Test Facility (ETF) has more than 20 test cells that can be used for testing prototype propulsion systems and components. The testing of propulsion systems requires significant data acquisition capabilities, with one test utilizing more than 4200 channels of instrumentation, including 200 dynamic strain gages. In response to the sheer set-up challenge, AEDC has developed the conc ...

    SBIR Phase II 2008 Department of DefenseAir Force
  6. Development of a Database Management System to Enable Rapid, Efficient Assay Design for Use in Detection and Diagnosis of Human Exposure to Biological

    SBC: CFD RESEARCH CORPORATION            Topic: CBD07114

    Increases in amount and diversity of high-throughput data presents tremendous organizational and analysis challenges to researchers. Our objective in this effort is to address these challenges by designing and implementing a database management system (cipherDB) for the storage, management, analysis, and visualization of diverse biological data types. The Phase I design and implementation of ciphe ...

    SBIR Phase II 2008 Department of DefenseOffice for Chemical and Biological Defense
  7. Model Independent First Principles Method for Prediction of Heat of Condensation/Sublimation of Solid Propellant

    SBC: CFD RESEARCH CORPORATION            Topic: OSD06PR5

    Designing next generation propellants requires an a priori prediction of their properties. Heat of sublimation is one such property that is required to theoretically estimate specific impulse. The state-of-art approach for estimating heat of sublimation is based on model compounds and empirical correlation, which has large RMS deviation. In Phase I, CFDRC has demonstrated that the first-principl ...

    SBIR Phase II 2008 Department of DefenseAir Force
  8. Numerical Simulation of Rocket Exhaust Interaction with Lunar Soil

    SBC: CFD RESEARCH CORPORATION            Topic: T602

    Rocket plume impingement can cause significant damage and contaminate co-landing spacecraft and surrounding habitat structures during lunar landing operations. CFDRC and the University of Florida will develop an innovative simulation system for predicting surface erosion and debris transport caused by lunar surface rocket plume impingement. This simulation system combines 1) a unified continuum-ra ...

    STTR Phase II 2008 National Aeronautics and Space Administration
  9. A High Throughput Screening Approach Enabling Sustainable Discovery of Novel Lead Compounds from Natural Product Extracts

    SBC: CFD RESEARCH CORPORATION            Topic: A07T034

    Emerging drug resistance in infectious threats poses a health risk for deployed forces. The primary objective of the Phase I effort was to enable the development of a sustainable drug discovery effort to continually generate lead compounds for discovery and derivative synthesis. Successful completion of Phase I demonstrated the utilization of a novel source of lead compounds, validation of two hi ...

    STTR Phase II 2008 Department of DefenseArmy
  10. Accurate Insensitive Munitions Modeling Tool Coupling Detailed Chemical Kinetics and Physical Models

    SBC: CFD RESEARCH CORPORATION            Topic: MDA06041

    Understanding the response of solid rocket motors under cook-off conditions is important to the safety of the military’s weapon arsenal. In this SBIR, CFDRC, teamed with Merrill Beckstead of Brigham Young University (BYU) and ATK Launch Systems, proposes to develop a software toolkit for simulating the response of solid rocket motors (SRM) to fast cook-off events. The complete software package w ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government