You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Scalable Gas-Particle Flow Simulation Tool for Lander Plume-Surface Interaction and Debris Prediction

    SBC: CFD RESEARCH CORPORATION            Topic: T9

    Plume-regolith interaction during propulsive landing results in (1) the liberation of dust/debris particles that may collide and strike the landing vehicle and surrounding assets obscuring ground observation for safe landing and (2) craters that are formed on the landing surface, posing additional challenges to vehicle stability and surface operations. The Gas-Granular Flow Solver (GGFS) had previ ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  2. Validated Engineering Tools for Thin-Ply Composites

    SBC: OPTERUS RESEARCH AND DEVELOPMENT, INC            Topic: T12

    Opterus Research and Development, Inc. proposes to develop and validate multi-scale thin-ply High Strain Composites (HSCs) constitutive modeling tools for incorporation into commercial finite element analysis codes. The constitutive models will capture the time-temperature-load-deformation viscoelastic characteristics common to HSCs as well as the yielding or permanent deformation associated with ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  3. Sentient Science- A Multiscale Modeling Suite for Process and Microstructure Prediction in Metal Additive Manufacturing

    SBC: SENTIENT SCIENCE CORPORATION            Topic: T12

    In the Phase I period, Sentient upgraded its DigitalClone for Additive Manufacturing (AM) technology and successfully demonstrated and validated its ldquo;Process modelrdquo; and ldquo;Microstructure modelrdquo; for simulating metal AM processes. Sentient has partnered with University of Nebraska ndash; Lincoln for model validation.Specifically, Sentient has implemented a new ldquo;Process modelrd ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  4. Integrated Mid-Infrared Sources Enabled by Waveguides Written with Femtosecond Lasers

    SBC: AKTIWAVE LLC            Topic: T8

    This proposal addresses, for the first time, the demonstration of integrated mid-infrared sources based on waveguiding in a bonded solid-state laser material and periodically poled nonlinear material. A focused femtosecond laser beam allows for precisely localized modification of the refractive index of a material, therefore enabling to create waveguiding structures. The offeror has demonstrated f ...

    STTR Phase II 2020 National Aeronautics and Space Administration
  5. Testing of COTS Systems in Space Radiation Environments

    SBC: STREAMLINE AUTOMATION LLC            Topic: T6

    For long duration space missions beyond LEO there is a wealth of COTS hardware that could potentially be implemented for non-critical tasks within heavily shielded spacecraft cabins. To employ COTS systems for such missions, we propose to use a simulation/experimental/statistical approach for risk acceptance Radiation Hardness Assurance (RHA) suitable for Cis-Lunar and Cis-Mars missions. The simul ...

    STTR Phase I 2020 National Aeronautics and Space Administration
  6. SCRAMBL (Space Communication Reconstruction and Mapping with Blockchain Ledgering)

    SBC: ORBIT LOGIC INCORPORATED            Topic: T11

    Orbit Logic and the Fraunhofer USA Center for Experimental Software Engineering propose development of a solution called SCRAMBL (Space Communication Reconstruction and Mapping with Blockchain Ledgering), which will leverage blockchain technology to store and distribute a ledger containing satellite constellation-relevant shared data to enable satellite onboard autonomy cooperative attendance of i ...

    STTR Phase I 2020 National Aeronautics and Space Administration
  7. OOA Process for Manufacture of Large Thin Gauge Composites

    SBC: Vistex Composites, LLC            Topic: T12

    Vistexrsquo;s patented Pressure Focusing Layer (PFLtrade;) technology utilizes a computationally optimized mold set that provides the same uniform pressure and temperature as an autoclave. NASA calls for an innovative out-of-autoclave processing method for thin-gauge structures. Vistexrsquo;s PFL process directly addresses this need. Specifically, the PFL processrsquo; core strength is its ability ...

    STTR Phase I 2020 National Aeronautics and Space Administration
  8. Numerical Simulation of Fields in Cavities with Detailed Antenna Modeling

    SBC: Electro Magnetic Applications, Inc.            Topic: T5

    Engineers at NASA are faced with the challenge of understanding complex electromagnetic effects that can impact payloads and launch vehicle hardware located under rocket fairings. Approximate approaches for modelingnbsp;antennas that interact with rocket fairingsnbsp;assume a plane wave incident upon the fairing for external antennas or a simple representation of the antenna (e.g., Hertzian dipole ...

    STTR Phase I 2020 National Aeronautics and Space Administration
  9. Early-Design Aeroacoustics Prediction for Distributed Electric Propulsion Vehicles using FlightStream

    SBC: RESEARCH IN FLIGHT LLC            Topic: T15

    Research in Flight and Auburn University are proposing to develop a robust tool and methodology to allow the simulation and modeling of acoustic signatures for Distributed Electric Propulsion (DEP) air vehicle concepts in the conceptual design phase. These new tools will enable the study of aeroacoustics in much greater detail and with greater fidelity than heretofore deemed practical in the early ...

    STTR Phase I 2020 National Aeronautics and Space Administration
  10. A New Oxygen Recovery Process to Reduce Waste from Propellant Tanks

    SBC: TDA RESEARCH, INC.            Topic: T2

    After landing, the lunar lander liquid oxygen tank may contain as much as 5% residual oxygen that is pressurized with helium. TDA Research proposes to develop an oxygen recovery module which separates the helium from the oxygen so that the remaining high purity oxygen can be readily supplied to life-support equipment and fuel cells. The oxygen recovery module uses an advanced sorbent that has a hi ...

    STTR Phase I 2020 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government