You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Multi-Modal Sensor with Real Time Telemetry for Storm Surge and other Meteorological Measurements
SBC: HYPERION TECHNOLOGY GROUP INC Topic: 836NStorm surge poses a grave threat to both life and property as hurricanes make landfall. The ability to monitor surge in real-time using a densely-space network of sensors with integrated data recording and telemetry would provide NOAA with a unique capability. Our approach is to offer a system which incorporates a flexible multi-modal data acquisition platform with integrated telemetry for real-ti ...
SBIR Phase I 2011 Department of CommerceNational Oceanic and Atmospheric Administration -
Development of Native Kelp Culture System Technologies to Support Sea Vegetable Aquaculture in New England Coastal Waters
SBC: OCEAN APPROVED, INC. Topic: 817This Phase II research expands Phase I research on Saccharina latissima and is to design and develop “seed” nursery methodologies for the development of commercial-scale production of juvenile kelp plants including Alaria esculenta and Laminaria digitata. The project objectives include: 1. Isolate and maintain cultures of New England species of Alaria esculenta and laminaria digitata to be use ...
SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration -
High Speed Naval Surface Munition
SBC: Donald L. Blount and Associates, Inc. Topic: SB103008SB103-008 has the objective to develop a high speed, semi-autonomous, naval surface munition designed to travel in water at speeds in excess of 100 knots to acoustically track and engage swarms of enemy boats up to 3 miles from the munition launch point. The munition is designed to fit within the footprint of an"A-size"sonobuoy. The proposed CONOPS results in multiple operating regimes: Sub- ...
SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency -
High Speed Naval Surface Munition
SBC: Vehicle Control Technologies, Inc. Topic: SB103008Underwater, high-speed vehicles present several design challenges. Along with the many cavity/hydrodynamic issues are included: propulsion, control, energy density, and navigation. In addition to an underwater high-speed vehicle design, this proposal describes the development of an air phase high-speed munition concept (HSM) that employs a single watery entry event. For relative shallow depth a ...
SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency -
Tamper Detection and Prevention
SBC: Global Infotek, Inc. Topic: SB111003Many sensors have been and are being deployed to detect the activities of malicious insiders and enable attribution to the proper individuals. The ADAMS program attempts to utilize the activity evidence captured by these sensors to proactively anticipate forthcoming malicious behavior by detecting the precursors of that malicious behavior. We will facilitate this goal by developing a specialize ...
SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency -
Real-Time Interactive Secure Forensic System (RTISFS)
SBC: Outdo Inc Topic: SB111003RTISFS will support identifying and defending against malicious insiders functionalities through: a wider range of access limitations; immutable, non-alerting forensic audit trail; dynamic environment supporting interactions with users without revealing the depth of forensic and enforcement capabilities; scripted interrogatories to assist separating anomalies attributed to malicious insiders from ...
SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency -
WASP-III Advanced Reconnaissance Device Network (WARDN)
SBC: MAV6 Topic: SB111004The WASP-III Advanced Reconnaissance Device Network (WARDN) is a miniaturized VHF/UHF emitter geolocation system targeted for installation on micro-UAV platforms. The Mav6 design approach of embedded antenna design, compact RF circuit design, and load balancing the signal processing and geolocation tasks between the airborne payload and the ground unit enables significant size, weight, and power ...
SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency -
Pump for Vapor-Liquid Mixtures of Refrigerants
SBC: Influent Corporation Topic: SB112001Current cooling systems are limited by the heat carrying capacity of the fluid, which is in turn limited by the pumping technology to move the fluid. This proposal allows a much higher heat capacity in the fluid, due to allowing the fluid to go from a 5% to 95% quality within the cooling circuit, which is enabled by an innovative and unique pumping technology that will be developed in this proposa ...
SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency -
Hydrogen Based High Velocity Insensitive Launch Systems
SBC: UTRON, Inc. Topic: SB112002The objective of this proposal is to further explore and refine the use of hydrogen based propellants for use in high velocity gun systems. This proposal will build on the ongoing and very novel research being conducted with direct combustion of hydrogen-oxygen mixtures at high initial pressures. While the research performed to date has demonstrated the performance potential inherent in this app ...
SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency -
Biometric-based Computer Authentication during Mission Oriented Protective Posture Scenarios
SBC: SED Technology LLC Topic: OSD10IA5SED Technology LLC proposes a feasibility study to determine if the proposed theory that IR can potentially answer the requirement of providing a 3-factor authentication capability. The proposed capability will allow continuous identification and can interact with computers on a periodic or on request basis to validate the identity of the soldier in MOPP 4 with no interference with mission accompl ...
SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency