You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. AI/ML Aided Aviation Sensors for Cognitive and Decision Optimization

    SBC: KRTKL INC.            Topic: SOCOM23B001

    krtkl (“critical”) will conduct a Phase I Feasibility Study to identify the best approach for reducing aviator cognitive load by optimizing information delivery and decision-making based on a thorough analysis of existing platforms, sensors, data sources, and onboard compute resources. This information will be used to identify Artificial Intelligence and Machine Learning based algorithms for p ...

    STTR Phase I 2023 Department of DefenseSpecial Operations Command
  2. Millimeter-wave MIMO Radar for UAS Tracking

    SBC: TOYON RESEARCH CORPORATION            Topic: A21CT009

    Small unmanned aerial systems (sUASs) are quickly emerging as low-cost attritable aerial platforms for hostile reconnaissance, targeting, weapon delivery, and other purposes. Unlike legacy air targets, small unmanned aerial systems fly at low altitude, are easily masked by terrain features, often fly at relatively low velocities that render many forms of Doppler and time/frequency radar exploitati ...

    STTR Phase I 2022 Department of DefenseArmy
  3. Millimeter-wave MIMO Counter-UAV Detection, Classification and Tracking Radar

    SBC: Arete Associates            Topic: A21CT009

    Areté and UCSD propose to use radar simulations and performance modeling to investigate the benefits and disadvantages of three potential MIMO Millimeter Wave (MMW), phased array configurations and to design a prototype for counter-UAS to detect, classify and track small targets out to 0.5-1.0 km range. Keys to success operational capability include sufficient SNR, sufficient angular resolution, ...

    STTR Phase I 2022 Department of DefenseArmy
  4. A Long Durability and High Power SOFC Stack for Portable Power Sources

    SBC: STORAGENERGY TECHNOLOGIES INC            Topic: A21CT011

    This Small Business Technology Transfer (STTR) project aims to leverage the recent advancement of solid oxide fuel cell (SOFC) to enable a compact and portable fuel cell system with a system-level volumetric power density of 3000W/L, which can serve as the lightweight power source for US Army. Storagenergy Technologies, Inc. (Storagenergy) proposes a compact SOFC system for portable power source ...

    STTR Phase I 2022 Department of DefenseArmy
  5. 5V Lithium Ion Rechargeable Battery

    SBC: TDA RESEARCH, INC.            Topic: A21CT016

    5.0 volt lithium batteries could provide higher power and greater energy density than existing 4.2 volt batteries, but there is currently not a known combination of electrodes and electrolytes that are stable under repeated charge/discharge cycles. Individual components such as the anode, new olivine cathodes and ionic liquid electrolyte are individually stable at these voltages, but they fail at ...

    STTR Phase I 2022 Department of DefenseArmy
  6. High Launch Force Survivable Bispectral Obscurant

    SBC: Integrated Solutions for Systems, Inc.            Topic: A21CT019

    Bispectral Obscurants are used to defend troops and equipment from electro-optical and infra-red (EO/IR) detection devices. These obscurants are packaged within small form factor munitions such as a 66mm grenade or hand emplaced units that subsequently release the obscurant material into the air. The US Army is interested in Bispectral Obscurants that can survive high acceleration loads when launc ...

    STTR Phase I 2022 Department of DefenseArmy
  7. Modeling and Design Tool for Bio-Based Construction Products

    SBC: KARAGOZIAN & CASE, INC.            Topic: A21CT020

    The overall objective of the proposed effort is to develop a user-friendly fast-running software tool that assesses the blast / ballistic performance of various bio-based construction products and compares their blast/ballistic performance, fabrication and installation cost, energy efficiency, and logistics complications with that of other conventional construction materials.  Specific objectives ...

    STTR Phase I 2022 Department of DefenseArmy
  8. Wideband RF Radomes Compatible with Conformal Antennas and Gun-Launched Hypersonic Environments

    SBC: FIRST RF CORPORATION            Topic: A21CT002

    Recent advancements in artillery, muzzle velocity, and post-launch propulsion technology have enabled gun-launched projectiles to travel faster and at longer ranges than ever before. To be most effective in flight and at range, the projectiles must incorporate RF sensors to enable advanced, mission-critical functionality. The RF sensors must also be able to survive and operate through extreme gun- ...

    STTR Phase I 2022 Department of DefenseArmy
  9. Development of Vat Polymerization Materials for Additive Manufacturing of Gun Propellant

    SBC: NALAS ENGINEERING SERVICES INC            Topic: A21CT003

    The US Army and Department of Defense are continuing in their investment in the development of energetic materials for use in additive manufacturing (AM) for propellants.  Nalas Engineering is partnering with Dr. Lori Groven at the South Dakota School of Mines and Technology to develop innovative liquid resin systems for use in additive manufacturing, specifically UV light-based curing technol ...

    STTR Phase I 2022 Department of DefenseArmy
  10. Development of Energetic Polymer Systems for Additive Manufacturing Energetic Formulations

    SBC: NALAS ENGINEERING SERVICES INC            Topic: A21CT004

    The US Army is investing in the development of energetic materials for use in additive manufacturing (AM) for explosive and propellant applications in an ongoing effort to achieve extended range and lethality overmatch.  Currently, all commercially available monomers, polymers or resin systems for AM are non-energetic.  To use these in 3D printing applications for propellants and/or explosives, ...

    STTR Phase I 2022 Department of DefenseArmy
US Flag An Official Website of the United States Government