You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Comprehensive Surf Zone Modeling Tool

    SBC: Arete Associates            Topic: N19AT010

    The objective of this project is to advance the capabilities of the Coastal Battlefield Reconnaissance and Analysis (COBRA) system by creating a Surf Zone Modelling Tool (SZT) that can create realistic synthetic imagery of the surf zone (SZ). Through the use of this synthetic imagery the COBRA Program will be enabled to inform concept of operations (CONOPS) in unfamiliar environments as well as mo ...

    STTR Phase II 2020 Department of DefenseNavy
  2. Conjugate heat transfer for LES of gas turbine engines

    SBC: CASCADE TECHNOLOGIES, INC.            Topic: N19BT027

    Current design tools for gas turbine engines invoke a variety of simplifying assumptions to estimate heat transfer to solid/metal engine components (e.g., isothermal boundary conditions). These approximations are often not valid, result in inaccurate predictions of heat transfer, and ultimately compromise the thermal integrity of propulsion and power systems. Wall-modeled large eddy simulation (WM ...

    STTR Phase II 2020 Department of DefenseNavy
  3. Triton™: Active Imaging through Fog

    SBC: SA Photonics, Inc.            Topic: N18AT021

    Active imaging systems are used in degraded visual environments, like those found in marine fog and other areas with a high level of attenuation and scattering from obscurants like rain, smoke and dust. These systems are still limited in range and resolution. SA Photonics is taking advantage of new eyesafe, hybrid fiber-bulk laser technology capable of high pulse energy at high repetition rate to ...

    STTR Phase II 2020 Department of DefenseNavy
  4. Non-Destructive Evaluation (NDE) of Missile Launcher Ablatives

    SBC: Texas Research Institute, Austin, Inc.            Topic: N18AT011

    MK-41 VLS exhaust paths are lined with ablative insulation that chars and ablates with each missile firing. There is no way to inspect, in-situ, chemical and physical changes to the ablatives. Such measurements are complicated because ablative materials: vary with location, are low density, and degrade non-linearly with firings.Failure of VLS insulation is not an option – but the usage life of t ...

    STTR Phase II 2020 Department of DefenseNavy
  5. Optimization of Fatigue Test Signal Compression Using The Wavelet Transform

    SBC: ATA Engineering, Inc.            Topic: N18BT029

    ATA Engineering has developed a wavelet-based damage squeezing methodology for generating optimally compressed fatigue test signals that produce an equivalent amount of fatigue damage in a predictably reduced amount of time compared to the baseline (uncompressed) signals. Fatigue-critical signal characteristics (e.g., magnitude, phase, frequency, and sequencing relationships) are identified in the ...

    STTR Phase II 2020 Department of DefenseNavy
  6. Additive Manufacturing for Naval Aviation Battery Applications

    SBC: Storagenergy Technologies, Inc.            Topic: N18AT008

    The objective of the efforts being proposed is to develop high energy density and power density batteries with long cycle life by high-speed additive manufacturing technologies.

    STTR Phase II 2019 Department of DefenseNavy
  7. Full Featured Low-Cost HMS for Combatant Craft

    SBC: QUALTECH SYSTEMS, INC.            Topic: N18AT015

    Qualtech Systems, Inc. (QSI), in collaboration with Vanderbilt University (VU) proposes to develop a state-of-the art Health Management System (HMS) system consisting of a small form factor GPS-enabled onboard computer, a small display for crew, and sensors for boat and engine vibration, OBD data, engine oil quality monitoring, and battery health monitoring. The HMS system will provide Wi-Fi and w ...

    STTR Phase II 2019 Department of DefenseNavy
  8. Detect and Avoid Certification Environment for Unmanned Air Vehicles (UAVs)

    SBC: RDRTEC INCORPORATED            Topic: N18AT007

    The objective of this project is to develop a comprehensive suite of tools, called the DAA Radar Software Suite and Simulation (DAA-RSSS), that supports future Navy procurement and certification of non-cooperative sensor technologies for Detect And Avoid (DAA) as well as develop plans to support EO/IR sensors as the non-cooperative sensor as informed by FAA activities in developing Minimum Operati ...

    STTR Phase II 2019 Department of DefenseNavy
  9. Protocol Feature Identification and Removal

    SBC: P & J ROBINSON CORP            Topic: N18AT018

    Protocols used for communication suffer bloat from a variety of sources, such as support for legacy features or rarely used (and unnecessary) functionality. Traditionally, the Navy subscribes to a blanket adoption of a standard protocol "as is". Unnecessary features are active and can be accessed by both internal and external systems creating security vulnerabilities. PJR Corporation's (PJR's) Pha ...

    STTR Phase II 2019 Department of DefenseNavy
  10. Additive Manufacturing for Naval Aviation Battery Applications

    SBC: Texas Research Institute, Austin, Inc.            Topic: N18AT008

    Texas Research Austin (TRI-Austin) will continue to partner with the University of Texas, Austin, to use additive manufacturing for fabricating and optimizing the lithium ion and electroactive metal electrode systems for which the team established proof of concept in the Phase I base period. The Aerosol Deposition Method (ADM) is a broadly applicable additive manufacturing technology that has been ...

    STTR Phase II 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government