You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. 1

    SBC: Polarix Corporation            Topic: AFX20DTCSO1

    Polarix is developing a motor/generator/inverter technology, which combines major increase in power density with increased, reliability, efficiency and manufacturability. The Polarix Arrayed Controlled Turnless Structures (ACTS) motor will exhibit up to an order of magnitude greater power density than present technology.  It relies on the integration of arrays of low voltage independently control ...

    STTR Phase I 2021 Department of DefenseAir Force
  2. Accelerated Burn-In Process for High Power Quantum Cascade Lasers to Reduce Total Cost of Ownership

    SBC: Adtech Photonics, Inc.            Topic: N20BT029

    Quantum Cascade Lasers (QCLs) are one of the most versatile sources of radiation in the mid-infrared range and have found applications in a variety of fields. Despite their widespread adoption, one of the main hurdles holding QCLs back from large volume manufacturing is the large cost of ownership. While QCLs, like most semiconductor devices based on III-V compounds, can leverage the economies of ...

    STTR Phase I 2021 Department of DefenseNavy
  3. Accurate Space Object Prediction via Improved Atmospheric Drag Model

    SBC: KAYHAN SPACE CORP            Topic: AF20CTCSO1

    Atmospheric drag is the biggest source of error and the least predictable perturbing force acting on spacecraft and space debris objects in orbit around Earth. The U.S. Air Force uses the High accuracy satellite drag model (HASDM) to predict the atmospheric drag effects. Kayhan Space in collaboration with the University of Colorado Boulder seeks to improve the HASDM by decoupling and simultaneousl ...

    STTR Phase I 2021 Department of DefenseAir Force
  4. Achieving High L/D in a VTOL Aircraft


    Most VTOL aircraft in development today focus on shorter range and smaller payloads, insufficient or too expensive for regional travel. To meet this need, Craft is developing a novel VTOL aircraft focused on regional transport and wide accessibility. The

    STTR Phase I 2021 Department of DefenseAir Force
  5. Acoustic Pattern Recognition for Security Breaching Noise Detection

    SBC: Scientific Applications & Research Associates, Inc.            Topic: N06T036

    A proposed acoustic pattern recognition system will be based around an array of acoustic sensors to allow localization of sound events and cancellation of background noise. The number of sensors could be adjusted to vary the coverage area depending on the site. The measured signals will provide the input to a sophisticated signal processing algorithm that will separate the acoustic signals into ...

    STTR Phase I 2006 Department of DefenseNavy
  6. Acoustic performance database

    SBC: Archer Aviation Inc.            Topic: AFX20DTCSO1

    Quiet operation is a critical prerequisite for community acceptance of electric Vertical Take-Off and Landing (eVTOL) vehicles within Urban Environments. Novel arrangements of mature propulsion systems show promise in reducing aircraft far-field noise wit

    STTR Phase I 2021 Department of DefenseAir Force
  7. Active Landing Gear™ for Advanced Air Mobility: Delivering a Safe, Simple and Virtually Silent Aircraft without the Runway

    SBC: METRO HOP, INC.            Topic: AFX20DTCSO1

    Metro Hop is building a new family of aircraft developed for Advanced Air Mobility. These winged aircraft fly fast with substantial payloads yet operate nearly silently out of small spaces. Metro Hop can achieve this because of its patent pending Active Landing Gear™. The unique landing gear means that Metro Hop aircraft can handle the vast majority of VTOL missions with superior performance. Me ...

    STTR Phase I 2021 Department of DefenseAir Force
  8. Adaptive camera to display mappings using computer vision

    SBC: POLAR RAIN, INC.            Topic: N/A

    The video surveillance industry is experiencing dramatic change with the move from analog to digital video. Command centers need to have coordinated viewing of multiple camera feeds at one time, and the ability to switch automatically between feeds and display relevant patterns. Conventional security control rooms include a bank of monitors connected through a switch to an array of security camera ...

    STTR Phase I 2006 Department of Homeland Security
  9. Adaptive Materials for Morphing Aircraft Skins


    In the proposed Phase I program, Composite Technology Development Inc. (CTD) will work with Raytheon Missile Systems to define material requirements for morphing aircraft skins, and will perform material evaluations to demonstrate the feasibility of adaptive materials with dynamically variable stiffness. Georgia Tech Research Corporation (GTRC) will provide mechanical characterization support.

    STTR Phase I 2006 Department of DefenseAir Force
  10. Additive Manufacturing of Thermoset Polymers Using Projection-based Stereolithography

    SBC: Storagenergy Technologies, Inc.            Topic: A20BT010

    Storagenergy Technologies Inc. proposes a novel methodology that allows for the 3D printing of different wholly thermally cured thermosets in a fast and precise fashion mask-image-projection-based -Stereolithography (MIP-SLA) additive manufacturing process. The proposed MIP-SLA based approach has several advantages over other technologies for additive manufacturing of thermoset polymers, including ...

    STTR Phase I 2021 Department of DefenseArmy
US Flag An Official Website of the United States Government