You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Integrated Ferrite Inductors and Transformers for Power Electronics with Ultra-low SWAP-C

    SBC: WINCHESTER TECHNOLOGIES LLC            Topic: A16020

    State-of-the-art power electronics use discrete components such as power magnetic inductors and transformers operating at < 1MHz, which suffer from a large SWAP-C (size, weight, power consumption, and cost). It has been challenging to achieve simultaneously high inductance, compact size, and high quality factors at 1~300MHz for integrated power electronics. In the completed Phase II Army STTR Phas ...

    STTR Phase II 2023 Department of DefenseArmy
  2. Formable Preform for Advanced Ceramic Matrix Composite Structures

    SBC: PEPIN ASSOCIATES INC            Topic: DLA23A003

    Pepin Associates, Inc. has developed a unique, aligned discontinuous textile reinforcement for composite structures.  This reinforcement architecture is composed of short, overlapped tow segments.  The architecture allows the textile to stretch in its reinforcement direction.  This ability permits rapid fabrication of complex shaped thermal protection system structures from simple low cost sh ...

    STTR Phase I 2023 Department of DefenseDefense Logistics Agency
  3. Radar for Accelerated Breaching of Concrete Structures (RABCS)

    SBC: PHYSICAL SCIENCES INC.            Topic: A21CT012

    The US Army and other DOD forces occasionally need to breach reinforced concrete structures. There are several existing methods to assess the structural properties and predict reinforcement but each of these methods has specific deficiencies (e.g. to loud, too large, too inconsistent). Ground penetrating radar is a promising technology for non-destructive concrete substructure characterization but ...

    STTR Phase II 2023 Department of DefenseArmy
  4. Online and Offline Terrain Strength Estimation Using Remote Sensing for Ground Vehicle Mobility- Phase II

    SBC: MTRI INC            Topic: A21CT021

    NATO is currently developing the Next-Generation Reference Mobility Model (NG-NRMM), which is used to determine terrain strength properties for mobility. The NG-NRMM relies heavily on in-situ measurements, which is a significant limitation for traversing unknown areas and combat zones. The MTRI Inc. and MTU team recently competed the A21C-T021 Phase I Small Business Technology Transfer (STTR) proj ...

    STTR Phase II 2023 Department of DefenseArmy
  5. Improved Technology to Treat Drug-Resistant Bacterial Infections

    SBC: TRITON SYSTEMS, INC.            Topic: A21CT010

    Bacterial infections are particularly significant for military personnel in situations where there may be a long delay between the injury and treatment at a hospital or clinic. The development of an effective, portable light-based system which can operate in both military hospitals and far-forward situations is proposed. The proof-of-concept prototype developed in Phase I will be refined to be mor ...

    STTR Phase II 2023 Department of DefenseArmy
  6. Computationally Driven Reliability &amp; Repeatability for Wire Arc Additive Manufacturing of High Strength Maraging 250 Steel

    SBC: SOLVUS GLOBAL LLC            Topic: A21CT023

    Challenge: Reliable & repeatable production of large format, high performance components that are difficult to source using conventional casting and forging methods. We will Deliver: A physics-based modeling framework that enables reliable and repeatable large-format component-level production of high strength (>200 ksi) Maraging Steel produced via Wire-Arc Additive Manufacturing (WAAM). Proposal: ...

    STTR Phase II 2023 Department of DefenseArmy
  7. Development of high energy density reserve lithium-oxygen batteries with integrated chemical oxygen generation

    SBC: WASATCH IONICS LLC            Topic: A22BT001

    The new Bottom Attach munitions for the Close Terrain-Shaping Obstacles (CTSO) program, currently under development by the Army, requires that reserve batteries operate 30 days after activation in a low power sleep mode, while providing multiple high-power pulses. This operational profile requires batteries with energy and power densities beyond the limits of the current liquid reserve batteries. ...

    STTR Phase I 2022 Department of DefenseArmy
  8. Rapid Freezing Injection Molding and Sublimation Process for Fabrication of Controlled Fragmentation Tungsten Warheads

    SBC: CPS TECHNOLOGIES CORP.            Topic: A22BT005

    Tungsten (W) has been considered for warhead applications as it has a high density, potentially resulting increased lethality from small, low drag, high kinetic energy fragments at increased or predictable standoff distances.  Injection molding (IM) is considered to be the low-cost fabrication high production volume approach for production providing features that promote fragmentation without m ...

    STTR Phase I 2022 Department of DefenseArmy
  9. High-Power Chip Scale Coherent Laser Array

    SBC: CORCORAN ENGINEERING, INC.            Topic: A22BT007

    In the proposed effort, Clemson University COMSET, Corcoran Engineering, and Freedom Photonics will develop chip-scale directed energy microsystems using coherent beam combining of single mode lasers to provide a high-power output beam with excellent beam quality and high brightness.  To create this high--performance Photonic Integrated Circuit (PIC), we will design, fabricate and demonstrate a h ...

    STTR Phase I 2022 Department of DefenseArmy
  10. Fast Startup, Fuel Flexible CPOX System for SOFC

    SBC: PRECISION COMBUSTION, INC.            Topic: A22BT009

    A compact and portable SOFC, 1-3 kW, is an excellent choice to convert a hydrocarbon fuel source to electricity due to its high efficiency. Currently, SOFCs are optimized to run a single fuel source, and a fuel flexible reforming technique that can integrate with SOFC is needed to have the potential to utilize all different energy assets, including propane, methane, and biogas. Catalytic partial o ...

    STTR Phase I 2022 Department of DefenseArmy
US Flag An Official Website of the United States Government