You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Homopolar AC Electric Machines for Naval Applications

    SBC: McCoy Consulting, LLC            Topic: N19AT007

    The objective of this proposed effort is to increase the power and torque density of rotating electric machinery for Naval applications by up to 50%. This aggressive goal will be achieved by developing the novel homopolar AC machine (HAM) topology. This relatively un-studied topology relies on solenoidal field and armature coils, making manufacturing simpler than traditional machines. The HAM elim ...

    STTR Phase I 2019 Department of DefenseNavy
  2. Innovations in Designing Damage Tolerant Rotorcraft Components by Interface Tailoring

    SBC: HARP ENGINEERING LLC            Topic: N19AT003

    The performance of a composite material is heavily influenced by the strength and toughness of the interlaminar region, which is the resin rich area between the plies of a fiber reinforced composite. The interlaminar region generally provides a direct path for crack propagation since no continuous reinforcement is present and is often the cause of failure in materials subjected to cyclic loading s ...

    STTR Phase I 2019 Department of DefenseNavy
  3. Cyberspace Operations Degraded Exercise & Synthetic Training Architecture (CODESTAR)

    SBC: SOAR TECHNOLOGY, INC.            Topic: N17AT023

    The majority of todays cyberspace training is conducted on dedicated, closed network virtual ranges that provide the basic services and controls necessary to train DoD Cyberspace Mission Forces on their primary tasks and missions [Wells,2015]. These ranges operate independently from the traditional M&S environments used to conduct battlestaff and Fleet synthetic training (FST) that, in the real wo ...

    STTR Phase I 2017 Department of DefenseNavy
  4. Full Featured Low-Cost HMS for Combatant Craft

    SBC: QUALTECH SYSTEMS, INC.            Topic: N18AT015

    Qualtech Systems, Inc. (QSI), in collaboration with VU proposes to develop a state-of-the art HMS system featuring: (1) Low Hardware cost by leveraging industrial-grade computers ruggedized to military specifications (2) Low Software cost by leveraging QSI’s COTS TEAMS software with real-time monitoring and diagnosis capabilities (3) Vibration and Shock Analysis and its impact on vehicle and cre ...

    STTR Phase I 2018 Department of DefenseNavy
  5. Additive Manufacturing for Naval Aviation Battery Applications

    SBC: Storagenergy Technologies, Inc.            Topic: N18AT008

    Storagenergy Technologies Inc. proposes to develop an all solid-state battery (ASSB) which can be made by a high-speed AMtechnology.

    STTR Phase I 2018 Department of DefenseNavy
  6. Twiner

    SBC: SOAR TECHNOLOGY, INC.            Topic: N18AT019

    We currently lack the ability to holistically and autonomously look across all three layers of cyberspace (persona, logical and physical) and identify interesting patterns, which would give us an edge in understanding complex activities in and through cyberspace. To address this challenge, Soar Technology (SoarTech) and the GeorgiaTech Research Institute (GTRI) propose Twiner, an intelligent syste ...

    STTR Phase I 2018 Department of DefenseNavy
  7. Algorithms for Look-down Infrared Target Exploitation

    SBC: SIGNATURE RESEARCH, INC.            Topic: 1

    Signature Research, Inc. (SGR) and Michigan Technological University (MTU) propose a Phase I STTR effort to develop a learning algorithm which exploits the spatio-spectral characteristics inherent within IR imagery and motion imagery.Our archive of modelled and labeled data sets will allow our team to thoroughly capture the variable elements that will drive machine learning performance.The overall ...

    STTR Phase I 2018 Department of DefenseNational Geospatial-Intelligence Agency
  8. Circulating Diagnostic Markers of Infectious Disease

    SBC: PATHOVACS INCORPORATED            Topic: CBD18A001

    The focus of this STTR phase I component is on proof-of-concept studies demonstrating applicability of technical approaches for identificationof circulatory diagnostic markers for infectious disease. Therefore, the primary objective of this project is to determine feasibility of one suchtechnical approach called Proteomics-based Expression Library Screening (PELS), for identification of pathogen-d ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  9. Innovative additive manufacturing (AM) process for successful production of 7000 series aluminum alloy components using Smart Optical Monitoring Syste

    SBC: Sensigma Llc            Topic: N18AT005

    Naval aircraft components are routinely made of 7000 series aluminum alloys due to their strength, weight and fatigue properties. Present Additive Manufacturing (AM) processes falls short of producing 7000 series Al alloys successfully due to lack of porosity, thermal and composition control. In-situ methods implemented to date largely only yield information about the component surface and other m ...

    STTR Phase I 2018 Department of DefenseNavy
  10. Meaning-Aligned Record Synthesis for Training Emerging Capabilities (MARSTEC)

    SBC: SOAR TECHNOLOGY, INC.            Topic: N18AT003

    Operational experts collect recorded data about emerging tactics, techniques, and procedures (TTPs) from sources such as live and virtual training exercises, and numerous test and evaluation simulations. However, instructional designers cannot easily reuse the recorded data to create new training. Without sufficient access to operational experts, expert knowledge is inaccessible and fragmented, of ...

    STTR Phase I 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government