You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. QMU in Integrated Spacecraft System Models

    SBC: ACTA, LLC            Topic: T5

    ACTA and Sandia National Laboratories propose to quantify and propagate substructure modeling uncertainty for reduced-order substructure models to higher levels of system assembly, thereby enabling predictive simulations of engineering designs with quantified margins and uncertainties for model-based flight qualification of complete spacecraft. A critical part of this process is the accurate mode ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  2. Advanced Structural Health Monitoring System for Comprehensive Real-Time Vehicle Characterization

    SBC: AMERICAN GNC CORPORATION            Topic: T1

    In providing an innovative solution to improving information technologies and health management systems, AGNC is proposing a significant technological achievement with the Advanced Structural Health Monitoring System for Comprehensive Real-Time Vehicle Characterization. During in-flight conditions, this system is able to not only provide the status of information such as regarding the flight envel ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  3. Three-Dimensional Backscatter X-Ray Imaging System

    SBC: ARIBEX            Topic: T7

    The overall objective of the proposal is to design, develop and demonstrate a potentially portable Compton x-ray scatter 3D-imaging system by using specially designed rotationally movable x-ray source and x-ray detector, and the development of a suitable 3D-processing computer model. The proposed rotational configuration will allow the acquisition of multiple projections or images 360

    STTR Phase I 2010 National Aeronautics and Space Administration
  4. Terahertz Quantum Cascade Laser Based 3D Imaging

    SBC: LONGWAVE PHOTONICS LLC            Topic: T7

    The NASA Constellation program has a need to non-destructively test (NDT) non-metallic materials (foams, Shuttle Tile, Avcoat, etc) for defects such as delaminations and voids. While imaging systems at terahertz frequencies (0.3 to 3 THz) have been demonstrated for 2D imaging of similar materials, they have not yet demonstrate full 3D volumetric imaging. To meet this need, LongWave Photonics pro ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  5. High-Performance, Radiation-Hard, 2-D, Near-Infrared, Avalanche Photodiode Arrays

    SBC: ADTECH PHOTONICS, INC            Topic: N/A

    In this STTR project we will address the radiation hardness issues using radiation hard (RH) materials. We will based on the RH material to develop our photon counting APD device structure and grow and fabricate high-quality devices that can achieve high sensitivity, high uniformity, low dark counts, and fast and small after-pulse dark current. We will further utilize our high quality guard-ring a ...

    STTR Phase I 2005 National Aeronautics and Space Administration
  6. CFD-Based Multidisciplinary Analysis for Flight Vehicle Simulation and Control

    SBC: Advanced Engineering Solutions            Topic: N/A

    The ability to quickly estimate flight vehicle behavior in an operational environment is particularly important since engineers from a variety of disciplines require accurate predictions in order to plan flight test experiments, expand aircraft operating envelopes safely, and have access to diagnostic methods when problems arise. In order to minimize risks, and to maximize compatibility with prese ...

    STTR Phase I 2003 National Aeronautics and Space Administration
  7. A Mass-Reducing End-Plugging Scheme for the Gasdynamic Mirror Propulsion System

    SBC: Advent Engineering Services, Inc.            Topic: N/A

    A very promising approach to a significant reduction of the mass of the gasdynamic mirror (GDM) fusion propulsion system is proposed. It makes use of field-reversal techniques whereby a rotating magnetic field is employed to induce an azimuthal current in the plasma, which in turn gives rise to the desired magnetic field at an appropriate plasma radius in the mirror region. This has the effect of ...

    STTR Phase I 2001 National Aeronautics and Space Administration
  8. N/A

    SBC: Aguila Technologies, Inc.            Topic: N/A

    N/A

    STTR Phase I 1999 National Aeronautics and Space Administration
  9. N/A

    SBC: Alpha Star Corporation            Topic: N/A

    N/A

    STTR Phase I 1999 National Aeronautics and Space Administration
  10. N/A

    SBC: Alpha Star Corporation            Topic: N/A

    N/A

    STTR Phase I 2000 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government