You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Encapsulated Particles: Improved Catalyst for the Production of Methanol from CO
SBC: ALAMEDA APPLIED SCIENCES CORPORATION Topic: N/A65877 The generation of high power, high frequency microwaves, using conventional sources such as klystrons or traveling wave amplifiers, requires that very high field gradients be sustained in small output cavities for a long duration. A high-current electron beam source, and thus a high power modulator, is also required. This project will develop a doped diamond switch as a pulse compressor el ...
SBIR Phase I 2001 Department of Energy -
On-Line Texture Diagnostics for Coated Conductor Manufacture
SBC: ADELPHI TECHNOLOGY INC Topic: N/A65576 Ionization chambers and photomultiplier tubes are commonly used in nuclear physics and other scientific research due to their sensitivity and energy resolution. However, these detectors provide very poor imaging capabilities. Alternatively, phosphor screens, photoemissive materials, and amorphous detectors are commonly used for imaging, but they provide poor sensitivity and energy resolut ...
SBIR Phase I 2001 Department of Energy -
Nanostructured Externally Cure-Initiated Thermally and Electrically Conductive Adhesives
SBC: ADVANCED FUEL RESEARCH, INC. Topic: N/A65805 High rate energy storage devices, such as ultracapacitors, are a critical enabling technology for hybrid electric vehicles (HEV). The best electrode materials for use in electric double-layer capacitors (EDLC) possess three characteristics: (1) high surface area; (2) high electrical conductivity; and (3) surface area easily accessible by electrolyte. While ruthenium-based ultracapacitors ...
SBIR Phase I 2001 Department of Energy -
Smart Condition Monitor for High Temperature Turbine Blades
SBC: ADVANCED FUEL RESEARCH, INC. Topic: N/A65030 Advanced gas turbine engines for energy generation suffer turbine blade failure due to overheating, resulting in loss of energy generation and high repair costs. New in-service diagnostics are required to provide lifetime predictions and warnings for the impending catastrophic failure of high speed rotors that use thermal barrier coatings. This project will develop an on-engine sensor for ...
SBIR Phase I 2001 Department of Energy -
Enhanced, Three-Dimensional, Multicomponent Seismic Imaging for Lithology and Fluid Characterization
SBC: 4th Wave Imaging Corporation Topic: N/A60143 Multicomponent shear-wave seismic data reveal information about subsurface lithologies and fluid properties that is difficult or impossible to obtain with compressional-wave data alone. Although commercially available three-dimensional (3D), multicomponent simulations handle many aspects of the 3D behavior of shear waves in complex media, there are serious gaps. In particular, step ...
SBIR Phase I 2001 Department of Energy -
A Scalable APC Process with a Novel Pin Structure for High Field Magnets
SBC: Aracor Topic: N/A65165 The current-carrying capacity of high-temperature superconductors needs to be improved to reduce the costs and pollution associated with electric power generation, delivery, and use. Such improvements will require on-line diagnostics to detect defects in the superconducting wires as they are being manufactured. This project will develop x-ray diagnostics to provide a rapid analysis of sup ...
SBIR Phase I 2001 Department of Energy -
Direct Lamination Cooling of Motors for Electric Vehicles
SBC: AEROVIRONMENT, INC. Topic: N/A60765 Current designs for electric motors use a housing that acts as both a structural support and as a method of cooling the stator and rotor. This approach to cooling is not as effective as possible because heat must flow from the rotor and stator through the housing to the cooling media. Because the housing must contain the coolant, it is also larger, heavier, and more expensive than n ...
SBIR Phase I 2001 Department of Energy -
Improving Electronic Circuit and System Reliability Using Embedded Prognostics
SBC: Aguila Technologies, Inc. Topic: N/A65672 Manufacturing methods for CdZnTe gamma and x-ray pixel detectors, used in medical imaging, are relatively immature. One difficulty with CdZnTe as a detector material is that CdZnTe is more brittle than silicon, so standard bonding approaches frequently result in craters in the detector as well as bond failures. This has forced detector manufacturers to resort to more labor-intensive and c ...
SBIR Phase I 2001 Department of Energy -
A Novel Concept to Achieve High-Packing Density of Solar Cells with High Reliability
SBC: Amonix, Inc. Topic: N/A60136 The use of photovoltaic (PV) cells for thermophotovoltaic (TPV) or reflective concentration systems will require a configuration that maximizes performance through dense cell packing and provides for high reliability through the use of bypass diodes. The lack of such a method is an impediment to the commercialization of TPV and reflective concentration systems. This project will use ...
SBIR Phase I 2001 Department of Energy -
Low Cost, Modular, Single-Phase Power Converter Unit for Customer-Sited Distributed Energy Resource Technologies
SBC: Arseco Topic: N/A65023 A lack of standardized low-cost power converter units (PCUs) for distributed energy resource (DER) systems inhibits the development of commercial mass markets. Present designs are costly, application specific, and use discrete components. To overcome this problem, this project will develop PCUs based on Power Electronic Building Block, (PEBB) modules. These units would be able to interfa ...
SBIR Phase I 2001 Department of Energy