You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Biomimetic Slope Adaptive Foot-Ankle Prosthesis

    SBC: MOTION CONTROL, INC            Topic: DHP16C007

    The primary objective is to develop a commercially-viable prototype of the slope adaptive prosthesis design and to iteratively improve the design based on ISO standards testing and rigorous use in human subject field trials. The proposed work will build upon knowledge gained in Phase I of the project, which established feasibility for this design approach in a lightweight, passive hydraulic foot-a ...

    STTR Phase II 2018 Department of DefenseDefense Health Program
  2. INSPIRE- In-Mask Sensors for Physiological Investigation of Respiratory Exhalation

    SBC: MAKEL ENGINEERING, INC.            Topic: DHP16C002

    Makel Engineering, Inc. and Sandia National Laboratories propose to demonstrate an advanced multi-modal sensor system for in-situ analysis of exhaled volatile organic compounds (VOCs) for pilots, divers and field patients. The In-Mask Sensors for Physiological Investigation of Respiratory Exhalation – INSPIRE combines a micro-gas chromatograph (?GC) and miniature ion mobility spectrometer (IMS) ...

    STTR Phase II 2018 Department of DefenseDefense Health Program
  3. High Performance 3D Photonic Integration for Space Applications

    SBC: Freedom Photonics LLC            Topic: T8

    In this work, Freedom Photonics will team with University of California, Santa Barbara to develop a hybrid integration platform that integrates yielded, best-of-breed active optical components with low-cost, high functionality Silicon Photonics components in a manner that is compatible with foundry fabrication (such as AIM Photonics). This will be performed in a highly manufacturable manner, using ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  4. Demonstration of Autonomous Differential Throttle-based Flight Control for Aircraft with Distributed Electric Propulsion

    SBC: Empirical Systems Aerospace, Inc.            Topic: T15

    A series of RDT&E activities is proposed to create and demonstrate a reconfigurable, autonomous flight controller for the Aircraft for Distributed Electric Propulsion Throttle-based Flight Control (ADEPT-FC) which was designed and built in Phase I, a 33 lb remote controlled aircraft featuring eight overwing electric ducted fans (EDFs) distributed spanwise along the wing’s trailing edge. The prop ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  5. Optical Intersatellite Communications for CubeSat Swarms

    SBC: CROSS TRAC ENGINEERING, INC.            Topic: T11

    .The growing interest in CubeSat swarm and constellation systems by NASA, the Department of Defense and commercial ventures has created a need for self-managed inter-satellite networks capable of handling large amount of data while simultaneously precisely synchronizing time and measuring the distances between the spacecraft. CrossTrac Engineering, Inc., in cooperation with our partners Professor ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  6. Through Wall Wireless Intelligent Sensor and Health Monitoring (TWall-ISHM) System

    SBC: AMERICAN GNC CORPORATION            Topic: T13

    To support development at NASA’s Stennis Space Center (SSC) testing facilities and infrastructure for the monitoring of remote or inaccessible measurement locations, American GNC Corporation (AGNC) and Rensselaer Polytechnic Institute (RPI) have developed the Through Wall Wireless Intelligent Sensor and Health Monitoring (TWall-ISHM) System. This technology allows deploying flexible instrumentat ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  7. Bifunctional Regenerative Electrochemical Air Transformation for Human Environments

    SBC: Skyre, Inc.            Topic: T6

    The proposed Bifunctional Regenerative Electrochemical Air Transformation for Human Environments (BREATHE) for life support and habitation is part of the atmosphere revitalization equipment necessary to provide and maintain a livable environment within the pressurized cabin of crewed spacecraft. Sustainable Innovations (SI) has developed a novel solid state technology for gas compression based on ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  8. Intelligent, Autonomous, Distributed Vehicle and Electrical Power System Management

    SBC: STOTTLER HENKE ASSOCIATES INC            Topic: T3

    The proposed innovation, a distributed architecture for intelligent characterization, fault detection/diagnosis/ reconfiguration/replanning/rescheduling, and adaptive execution, substantially leverages large previous NASA investments to assemble the correct set of technologies to implement all aspects of the required intelligent, autonomous vehicle and distributed EPS and other subsystem managers. ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  9. Efficient CO2 and H2O Removal with Novel Adsorbentsfor Life Support Applications on Mars

    SBC: MOSAIC MATERIALS, INC.            Topic: T6

    Very low CO2 concentrations that accumulate quickly from human respiration can have dramatic health effects, and thus in NASA’s history many technical removal strategies for CO2 from a confined atmosphere have been suggested and explored. A CO2 removal system that functions in a is a new area of research, as the primary CO2 removal component in the state-of-the-art system doesn’t have the adso ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  10. Integrated Photonic Filters for RF Signal Processing

    SBC: OEWAVES, INC.            Topic: T8

    In this Project, OEwaves Inc. and Georgia Tech team propose to research and develop a unique RF photonic receiver front-end enabling microwave signal processing at a heterogeneously integrated photonic platform. In particular, we propose to develop a new technology for photonic microwave filters based on the new advances in Si-based integrated photonics. We will exploit the expertise of the team m ...

    STTR Phase I 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government