You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. N/A

    SBC: BIPOLAR TECHNOLOGIES            Topic: N/A


    STTR Phase I 2000 Department of DefenseMissile Defense Agency
  2. Simultaneous Spatial/Spectral Infrared Sensor (SSIRS)

    SBC: I Technology Applications            Topic: N/A


    STTR Phase I 1999 Department of DefenseMissile Defense Agency
  3. Lightweight Nanocomposites for Missile Defense Applications

    SBC: Mers, Llc            Topic: N/A

    The key requirement for nanocomposite formation is dispersion of clay particles at nm length scales in polymer matrices, which is not trivial. Such a molecular-level dispersion necessitates complete exfoliation of clay particles, which occurs sporadicallywith the fabrication procedures currently in use. Based on a previously demonstrated concept, we propose to develop a novel nanocomposite fabri ...

    STTR Phase I 2001 Department of DefenseMissile Defense Agency
  4. High frequency optoelectronic pulse source for digital communications

    SBC: OPEL            Topic: N/A

    Clocks and pulse sources are critical elements for next generation IC¿¿s such as DSP¿¿s and ¿Yprocessors which depend critically on stability and jitter. Clock skew becomes significant because of the large chip dimension. ADC¿¿s and DAC¿¿s are mixedsignal circuits which demand extremely precise clocks at multi GB/s rates. Telecommunication transceivers and transponders ...

    STTR Phase I 2002 Department of DefenseMissile Defense Agency
  5. True time delay for interference cancellation

    SBC: OPEL            Topic: N/A

    True time delay (TTD) is essential for optically coupled phased array radars. How to implement the phased array is not so clear since a complete manifold of delays for transmit and delays must be implemented without introducing glitches associated withswitching. In a continuous transmit and receive mode, it is difficult to interrupt the operation to implement a new TTD delay combination in a noi ...

    STTR Phase I 2002 Department of DefenseMissile Defense Agency
  6. PIBO Film Dielectric for Advanced Microelectronics Packaging

    SBC: OXAZOGEN, INC.            Topic: N/A

    This proposal is the result of the successful completion of a Phase I program of the same name (contract F33615-01-M-2174). The purpose of this program is to extend that research and development program into the birth of an enabling new technology andproduct.Polyimidebenzoxazole (PIBO) film is a new, self-reinforced, low dielectric constant, low CTE (coefficient of thermal expansion) film with a ...

    STTR Phase II 2003 Department of DefenseMissile Defense Agency
  7. PIBO Dielectric Film for Advanced Microelectronics Packaging

    SBC: OXAZOGEN, INC.            Topic: N/A

    Electronics products in applications including mobile communications, work stations, small computers, automotive controls, and aerospace and military weapons systems are moving relentlessly toward smaller, thinner, and lighter formats in lower costpackages. Interconnect density requirements in these products are rapidly outstripping that which is achievable through fabrication of traditional mult ...

    STTR Phase I 2001 Department of DefenseMissile Defense Agency
  8. Innovative Thermal Insulation Technologies

    SBC: SORDAL, INC.            Topic: MDA04T021

    The MDA seeks innovative technologies for materials, processes, and manufacturing that will provide reliable, robust, and lightweight components for major space defense acquisition programs. The proposed STTR Phase I project will develop polyimide insulation materials that will protect sensitive cryogenic structures and subsystems from excessive heat buildup as result of direct solar heating, rad ...

    STTR Phase I 2004 Department of DefenseMissile Defense Agency
  9. Fluidized Bed Reactor for SOG


    Most SOG processes for the COIL exceed the carrying capacity of the ABL airframe. The key to SOG weight savings is to recycle and recharge an exchange media after each laser discharge. A recharge process reduces the weight of the exchange media by 80%compared to loading charged BHP media for an entire flight.All SOG recharging excites the oxygen by energy radiation. This work will develop fluidiz ...

    STTR Phase I 2003 Department of DefenseMissile Defense Agency
  10. Femtosecond Laser Micromachining of Optical Structures and Surfaces

    SBC: TRANSLUME, INC.            Topic: MDA04T016

    Translume is proposing a glass manufacturing process that combines anisotropic wet chemical etching with femtosecond-laser nanostructuring to shape three-dimensional glass objects. This innovative fabrication technique can be used to machine optical structures, optical sensors, and optical surfaces with micron and submicron accuracy. It can also be used to texture surfaces. Our technique is cost-e ...

    STTR Phase I 2004 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government