You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Advanced Electromagnetic Modeling with High Geometric Fidelity Using High-Order Curved Elements

    SBC: VIRTUAL EM INC.            Topic: N20BT028

    Virtual EM is proposing a method to achieve orders of magnitude improvement in computational efficiency in full-wave CEM codes by using high-order curved elements. Virtual EM’s own commercial product VirAntenn™ will provide the CEM setting for both developing and implementing the new capability in Phase I and Phase II, respectively. Using multi-wavelength long cells with high-order basis forms ...

    STTR Phase I 2020 Department of DefenseNavy
  2. Reduction of Predictable Spurs in the ADC outputs using AI

    SBC: VIRTUAL EM INC.            Topic: N20AT025

    An AI-based algorithm is being proposed to increase ADC linearity by 10dB. Neural Nets will be investigated in conjunction with models of spurs to accomplish the task.

    STTR Phase I 2020 Department of DefenseNavy
  3. Innovations in Designing Damage Tolerant Rotorcraft Components by Interface Tailoring

    SBC: HARP ENGINEERING LLC            Topic: N19AT003

    The performance of a composite material is heavily influenced by the strength and toughness of the interlaminar region, which is the resin rich area between the plies of a fiber reinforced composite.  The interlaminar region generally provides a direct path for crack propagation since no continuous reinforcement is present and is often the cause of failure in materials subjected to cyclic loadin ...

    STTR Phase II 2020 Department of DefenseNavy
  4. Low Visibility Radio Frequency Resonator

    SBC: VIRTUAL EM INC.            Topic: SOCOM19A001

    A prototyping effort is being proposed to develop methods and tools for utilizing structures of opportunity as efficient radiations in the HF, VHF and UHF bands.

    STTR Phase II 2020 Department of DefenseSpecial Operations Command
  5. Innovative Processing Techniques for Additive Manufacture of 7000 Series Aluminum Alloy Components

    SBC: Sensigma Llc            Topic: N18AT005

    Naval aircraft components are routinely made of 7000 series aluminum alloys due to their strength, weight and fatigue properties. Present Additive Manufacturing (AM) processes fall short of producing 7000 series Al alloys successfully due to lack of porosity, and thermal and composition control. In-situ methods implemented to date largely only yield information about the component surface and othe ...

    STTR Phase II 2020 Department of DefenseNavy
  6. Full Featured Low-Cost HMS for Combatant Craft

    SBC: QUALTECH SYSTEMS, INC.            Topic: N18AT015

    Qualtech Systems, Inc. (QSI), in collaboration with Vanderbilt University (VU) proposes to develop a state-of-the art Health Management System (HMS) system consisting of a small form factor GPS-enabled onboard computer, a small display for crew, and sensors for boat and engine vibration, OBD data, engine oil quality monitoring, and battery health monitoring. The HMS system will provide Wi-Fi and w ...

    STTR Phase II 2019 Department of DefenseNavy
  7. Additive Manufacturing for Naval Aviation Battery Applications

    SBC: Storagenergy Technologies, Inc.            Topic: N18AT008

    The objective of the efforts being proposed is to develop high energy density and power density batteries with long cycle life by high-speed additive manufacturing technologies.

    STTR Phase II 2019 Department of DefenseNavy
  8. Innovations in Designing Damage Tolerant Rotorcraft Components by Interface Tailoring

    SBC: HARP ENGINEERING LLC            Topic: N19AT003

    The performance of a composite material is heavily influenced by the strength and toughness of the interlaminar region, which is the resin rich area between the plies of a fiber reinforced composite. The interlaminar region generally provides a direct path for crack propagation since no continuous reinforcement is present and is often the cause of failure in materials subjected to cyclic loading s ...

    STTR Phase I 2019 Department of DefenseNavy
  9. Twiner Ph II

    SBC: SOAR TECHNOLOGY, INC.            Topic: N18AT019

    Human interaction in cyberspace leaves indicators in the three layers that define cyberspace: persona, logical and physical. The proposed effort seeks to develop algorithms and software to integrate data and context across all three layers, “intertwining” data to create a more holistic and complete picture of cyber activity. Such an integrated perspective will allow cyber professionals to bett ...

    STTR Phase II 2020 Department of DefenseNavy
  10. Homopolar AC Electric Machines for Naval Applications

    SBC: McCoy Consulting, LLC            Topic: N19AT007

    The objective of this proposed effort is to increase the power and torque density of rotating electric machinery for Naval applications by up to 50%. This aggressive goal will be achieved by developing the novel homopolar AC machine (HAM) topology. This relatively un-studied topology relies on solenoidal field and armature coils, making manufacturing simpler than traditional machines. The HAM elim ...

    STTR Phase I 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government