You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Low Cost Alloys for Magnetocaloric Refrigeration

    SBC: GENERAL ENGINEERING & RESEARCH, L.L.C.            Topic: 12b

    Replacement of petroleum based vehicles with fuel cell electric vehicles operating on hydrogen produced from domestically available resources would dramatically decrease emissions of greenhouse gases and other pollutants as well as reduce dependence on oil from politically volatile regions of the world. One major inhibitor to a hydrogen society is the lack of infrastructure, which requires hydroge ...

    STTR Phase II 2019 Department of Energy
  2. A Corrosion Test Station for Improved Characterization and Examination Capabilities of Advanced Nuclear Reactor Fuels and Materials

    SBC: Niowave, Inc.            Topic: 30i

    Liquid-metal coolants are one of the most promising solutions for the challenges of advanced high temperature nuclear reactor systems.They optimize heat transfer, neutronics, safety, and compactness of the reactor systems.Molten lead and lead-bismuth eutectic (LBE) are the primary coolant candidates due to their unique thermo-mechanical and neutronics properties.However, they are highly corrosive ...

    STTR Phase II 2019 Department of Energy
  3. Development of Production Strains of Chlamydomonas using Breeding Technologies

    SBC: GLOBAL ALGAE INNOVATIONS, INC.            Topic: 08c

    In order to make large scale commercial production of microalgae based commodity food and fuel products, significant strides in algal productivity need to be achieved. With current regulatory guidelines, large scale outdoor cultivation of microalgae for these products restricts the use of transgenic algal strains, which in the laboratory thus far have been the primary strategy taken to effectively ...

    STTR Phase II 2019 Department of Energy
  4. New Crystalline Silicon Module Architecture to Reduce Costs withImproved Manufacturability andDurability

    SBC: Creative Light Source, Inc            Topic: 16a

    Direct Solar in partnership with Colorado State University's Next Generation PV Center (NGPV) and H. B. Fuller Company will develop a new solar module architecture and manufacturing process optimized for crystalline silicon (c-Si) modules that significantly reduces manufacturing costs and improves reliability. The outcome of this program will be a new c-Si module design, streamlined manufacturing ...

    STTR Phase I 2019 Department of Energy
  5. Integration of TRISO Fuel Particles with Open-Cell Foam for Increased Safety, Heat Transfer, and Fuel Performance

    SBC: Ultramet            Topic: 33b

    Tristructural isotropic (TRISO) fuel is a key component of advanced small modular nuclear fission reactors due to its inherent safety at high temperatures and irradiation levels and decreased proliferation risk relative to current reactor fuels. A more efficient cooling method for TRISO fuel compacts would increase heat transfer, allow for an increase in fuel density, and further improve accident ...

    STTR Phase I 2019 Department of Energy
  6. 3D printing of High Precision Radiation Filters for next generation Cosmic Background (CMB) studies.

    SBC: Obsidian Advanced Manufacturing LLC            Topic: 31h

    The next generation of Cosmic Ray Background detectors require large area filters in the microwave part of the spectrum between 100 to 300 Gigahertz. These filters are essential to the extremely sensitive detection of the cosmic background radiation at the level of one part in a billion and will require precise fabrication of metallic structures on a polymer substrate. These filters will be placed ...

    STTR Phase I 2019 Department of Energy
  7. The Energy and Cost-efficient E-waste recovery project for rare-earths and precious metals

    SBC: Quantum Ventura, Inc.            Topic: 07d

    Idaho National Laboratory (INL), under funding from the Critical Materials Institute, has developed a US patented technology to reclaim valuable metals from waste electronic equipment. The Electrochemical Recycling Electronic Constituents of Value (E-RECOV) method uses an electrochemical cell to efficiently recover the bulk of metals from discarded electronics, leading to more complete recycling o ...

    STTR Phase I 2019 Department of Energy
  8. Quench Detection Method for Large Superconducting Magnets using Robust MEMS Acoustic Sensor Arrays

    SBC: Tanner Research, Inc.            Topic: 23c

    High Temperature Superconducting (HTS) materials have excellent mechanical and electrical properties. They are very attractive for various industrial applications such as power cables and high field, high current superconducting magnets. Magnets made with these materials could play a key role in the commercialization of fusion energy machines. However, HTS materials have very slow normal zone prop ...

    STTR Phase I 2019 Department of Energy
  9. Infinitely Recyclable Bioplastics (Topic 8, subtopic b)

    SBC: SusMer, Inc            Topic: 08b

    Plastics are indispensable materials for the modern life and global economy, but current practices in the generation and disposal of commodity plastics are largely unsustainable and causing severe worldwide plastics pollution and enormous materials' energy and value losses to the economy. In particular, plastics are a material of choice in packaging applications but they are currently designed for ...

    STTR Phase I 2019 Department of Energy
  10. Interference coatings for high energy and average power femtosecond-class lasers in the 0.8-2?m wavelength range

    SBC: XUV Lasers, Inc.            Topic: 28e

    The problem/situation that is being addressed concerns the development of near infrared ultrafast interference coatings(IC) for high average power femtosecond lasers that will meet the specifications of the DoE solicitation: “broad-bandwidth, laser damage threshold of 0.5 J/cm2 (1 ps), engineered using a process that is scalable to large areas.” Advances in compact high gradient laser-driven p ...

    STTR Phase I 2019 Department of Energy
US Flag An Official Website of the United States Government