You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Twiner Ph II

    SBC: SOAR TECHNOLOGY INC            Topic: N18AT019

    Human interaction in cyberspace leaves indicators in the three layers that define cyberspace: persona, logical and physical. The proposed effort seeks to develop algorithms and software to integrate data and context across all three layers, “intertwining” data to create a more holistic and complete picture of cyber activity. Such an integrated perspective will allow cyber professionals to bett ...

    STTR Phase II 2020 Department of DefenseNavy
  2. Adaptive Optics for Nonlinear Atmospheric Propagation of Laser Pulses

    SBC: ADVANCED SYSTEMS & TECHNOLOGIES INC            Topic: N17AT024

    Filamentation of ultra-short laser pulse propagation in non-linear media offers significant potentials allowing to address numerous problems in military and commercial sectors. However, practical implementation of this requires an ability to control the USLP at its propagation through inhomogeneous media, like turbulent atmosphere. On the basis of our approach for combating turbulence effects on p ...

    STTR Phase II 2018 Department of DefenseNavy
  3. Improved High-Frequency Bottom Loss Characterization

    SBC: HEAT, LIGHT, AND SOUND RESEARCH, INC.            Topic: N17AT026

    We propose development of an improved bottom database suitable for use in the frequency range of 1-10 kHz. Measured transmission loss (TL) and reverberation level (RL) will be jointly processed in building the database. The influence of the rough sea surface, rough seafloor, as well as subbottom heterogeneity will be accounted for during database generation. The rough sea surface will be character ...

    STTR Phase II 2018 Department of DefenseNavy
  4. Cyber Adversary Discovery Engine (CADE)

    SBC: CHARLES RIVER ANALYTICS, INC.            Topic: N19AT021

    Cyber warfare is a rapidly expanding, critical battlefield for the US Navy. Attacks on infrastructure, ship systems, and sailors themselves can significantly reduce operational readiness and deployment time, and can be very costly. To prepare and successfully defend this rapidly evolving battlefield, defensive cyberspace operations (DCOs) must analyze and forensically investigate attacks, but few ...

    STTR Phase II 2020 Department of DefenseNavy
  5. 3D Acoustic Model for Geometrically Constrained Environments

    SBC: HEAT, LIGHT, AND SOUND RESEARCH, INC.            Topic: N16AT018

    Systems that operate in constrained environments depend on the acoustics in several ways. Harbor defense systems detect intruders (peopleand/or vessels) by either listening for their noises (passively) or by pinging on them and detecting their echoes (actively). Furthermore, suchsystems may also form the equivalent of an underwater cell phone network using sound to carry the information. The acous ...

    STTR Phase II 2017 Department of DefenseNavy
  6. Triton™: Active Imaging through Fog

    SBC: SA PHOTONICS, LLC            Topic: N18AT021

    Active imaging systems are used in degraded visual environments, like those found in marine fog and other areas with a high level of attenuation and scattering from obscurants like rain, smoke and dust. These systems are still limited in range and resolution. SA Photonics is taking advantage of new eyesafe, hybrid fiber-bulk laser technology capable of high pulse energy at high repetition rate to ...

    STTR Phase II 2020 Department of DefenseNavy
  7. A Wavelength-Scalable Dual-Stage Photonic Integrated Circuit Spectrometer

    SBC: PHYSICAL SCIENCES INC.            Topic: N19AT023

    In this program, Physical Sciences Inc. (PSI) will team with Professor Ali Adibi’s group at the Georgia Institute of Technology to develop a photonic integrated circuit (PIC) spectrometer that can simultaneously achieve high-resolution over wide-bandwidths using a scalable and foundry-ready approach. While a PIC-based spectrometer is a key component for on-chip Raman, fluorescence, and absorptio ...

    STTR Phase II 2020 Department of DefenseNavy
  8. High Performance Energetic Propellant Ingredient Process Research and Development

    SBC: NALAS ENGINEERING SERVICES INC            Topic: N16AT021

    CL-20 is the most powerful conventional explosive known, but its high cost has limited its adoption in a range of potential applications. Par of the challenge in making these materials is the complexity of the reaction used to prepare the polycyclic cage. The complexity of this reaction makes it difficult to have insight into the reaction and to improve it. Additionally, several of the intermediat ...

    STTR Phase II 2018 Department of DefenseNavy
  9. Decision Support for Operators of Fully Autonomous Systems using RESTORE: Robust Execution System for Trusted Operation in Relevant Environments

    SBC: SCIENTIFIC SYSTEMS CO INC            Topic: N18BT032

    SSCI and MIT (Prof. Julie Shah) propose to develop and test a system that provides real-time assurance and trust in decisions made by autonomous collaborating vehicles. The proposed system is referred to as the RESTORE (Robust Execution System for Trusted Operation in Relevant Environments) and represents a decision support tool which facilitates decision making by the operator in cases when decis ...

    STTR Phase II 2020 Department of DefenseNavy
  10. Scalable Manufacturing of Composite Components using Nanostructured Heaters

    SBC: METIS DESIGN CORP            Topic: N18BT031

    Manufacturing of structural composites traditionally employs autoclaves to achieve high quality parts, including high fiber-volume-fractions and low porosity. A laminate comprised of stacked prepreg plies are cured under a vacuum in addition to ~7 bar of pressure to prevent formation of voids, particularly in interlaminar (inter-sheet/ply) regions. However, manufacturing composites within an autoc ...

    STTR Phase II 2020 Department of DefenseNavy
US Flag An Official Website of the United States Government