Award Data

This proposal will outline a bi-directional software defined Free Space Optics (FSO) laser communications testbed with flexible optical elements and reprogrammable waveform and signal processing elements. Vulcan Wireless Inc. currently manufacturers a 1550nm, eye safe, software defined Laser Communications Testbed MD-LC-1 and will use this as a basis for the Phase 1 effort. We will also be teaming ...

Trends in human-machine teaming and multi-domain operations will only increase the complexity of the tasks facing operators. This complexity comes with design risks: will operators be capable of performing the required tasks within acceptable levels of workload, stress, etc. Often, problems are not discovered until human testing is conducted, late in the process. At that point, design flaws may be ...

Through the proposed Phase I Air Force STTR program, NanoSonic and Virginia Tech will demonstrate metal organic framework materials and electrospray fabrication methods for the manufacture of eye protection devices that are capable of controlling the amount of light transmitted through the device. The objective of this program is to 1) increase the dynamic range and speed of electronically switche ...

This project will address the U.S. Air Force needs for single-piece, electronically dimmable eye protection device (EDEPD). In Phase I, InnoSense LLC (ISL) will demonstrate feasibility of the approach by incorporating electrochromic layer on curved polycarbonate substrates. Phase I tests will include optical and physical characterizations regarding transmission range, switching speed, haze, unifor ...

To address the U.S. Air Force need for Developing innovative wave-optics Propagation methods to model laser systems that are faster, efficient and more accurate, Luminit, LLC, and University of Southern California (USC) propose to develop Wave-Optic Propagation Computation Enabled by Machine Learning Algorithms (WOPA). The proposed algorithms will be based on cutting off redundant frequencies upon ...

Silvus Technologies and the University of California Los Angeles propose a system design and a rapid development path for the Regional Radio Frequency Attenuation and Interference Monitor, or ‘RF-AIM’. RF-AIM is intended to provide continuous wide area awareness of RF spectrum availability in the presence of arbitrary interference and attenuation from natural or man-made causes. The t ...

The proposed work aims at detailed investigation of Carbon Nanotube Field-Effect Transistor (CNTFET) device design and its impact on Radio-frequency (RF) circuit performance in comparison to Si-MOSFETs and related circuits at the same channel lengths. The goal is to establish a geometry scalable CNTFET compact model for RF circuit design and determine its parameters based on characteristics from b ...

The project will develop and validate a geometry scalable CNTFET compact model for HF circuit design and extract the model parameters from the measured characteristics of the fabricated devices. The ballistic and quasi-ballistic transport, quantum and parasitic effects will be accounted for the predicted performance will be compared to 130 nm RF Si-CMOS to determine the conditions for breaking eve ...

The main objective of this STTR effort is three-fold. First, to develop and demonstrate in Phase I a Bayesian methodology exploiting flight test data in order to identify critical store carriage tests and clear non-critical store carriage configurations by updated analysis. Second, to extend in Phase II the scope of this methodology to viscous flows with analysis enriched using analytical sensitiv ...

Current continuous wave (CW) and pulse mid-wave infrared (MWIR) lasers have design and performance limitations that constrain their usability in some critical Air Force applications. There is an important need to create a new class of MWIR laser sources with less drawbacks and higher pulse energies and CW powers. The proposed work will demonstrate the technical feasibility of an innovative MWIR la ...