You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. System for Nighttime and Low-Light Face Recognition

    SBC: MUKH Technologies LLC            Topic: SOCOM18A001

    Recognizing faces in low-light and nighttime conditions is a challenging problem due to the noisy and poor quality nature of the images.Thermal imaging is often used to obtain facial biometric in such conditions. Thermal face images, while having a strong signature at nighttime, are not typically maintained in biometric-enabled watch lists and so must be compared with visible-light face images to ...

    STTR Phase I 2018 Department of DefenseSpecial Operations Command
  2. System for Nighttime and Low-Light Face Recognition

    SBC: Systems & Technology Research LLC            Topic: SOCOM18A001

    Face recognition performance using deep learning has seen dramatic improvements in recent years. This improvement has been fueled in part by the curation of large labeled training datasets with millions of images of hundreds of thousands of subjects.This results in effective generalization for matching over pose, illumination, expression and age variation, however these datasets have traditionally ...

    STTR Phase I 2018 Department of DefenseSpecial Operations Command
  3. Human Performance Optimization

    SBC: REJUVENATE BIO INC            Topic: SOCOM17C001

    Special Operations Forces (SOF) are an integral aspect of the US military. SOF operators are among the most elite and highly qualified individuals in the U.S. military. As such, extraordinary physical and mental demands are placed upon them to excel in extreme environments for extended periods of time. This unrelenting cycle of combat deployments and intense pre-deployment training shortens the fu ...

    STTR Phase I 2018 Department of DefenseSpecial Operations Command
  4. Inhibiting Prolyl Hydroxylase to Mimic Natural Acclimatization to High Altitude to Improve Warfighter Performance at High Altitude

    SBC: Research Logistics Company            Topic: SOCOM17C001

    Acclimatization is the long-term adjustment that humans experience when exposed for weeks or months to high altitude. Acclimatization is important in this context because a warfighter who is acclimatized to high altitude is immune to high altitude illness, has superior work capacity, and has cognitive function approaching that found at sea level. In other words, the acclimatized warfighter is opti ...

    STTR Phase I 2018 Department of DefenseSpecial Operations Command
  5. Aeroservoelastic Multifidelity Design of Biomimetic Aircraft (AMuBA)

    SBC: Intelligent Automation, Inc.            Topic: T15

    NASA has been investigating morphing aircraft for multi-mission capabilities and performance improvements in existing fixed-wing aircraft. In addition, the design of aeroelastic aircraft that can control the structural flexibility to their advantage, is an open area of research and development. In spite of the plethora of work on morphing aircraft and long slender wings, the goal of fielding such ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  6. A Supported Liquid Membrane System for Steady State CO2 Control in a Spacecraft Cabin

    SBC: REACTION SYSTEMS, INC.            Topic: T6

    Reducing the allowable concentration of carbon dioxide (CO2) in spacecraft is a critical need for NASA. The system now used on the International Space Station (ISS) is the carbon dioxide removal assembly (CDRA). While it has performed well on the ISS, managers have concluded that using the device to reach the new ppCO2 limit of 2.0 mm Hg is not practical and a new method is needed.In this projec ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  7. Automated Fiber Placement of Thin-Ply Composite Materials for Large Aerospace Structures

    SBC: NEXTGEN MATERIALS & PROCESSING LLC            Topic: T12

    Leveraging their prior experience working with automated fiber placement (AFP) of thin-ply composite materials, NextGen Materials & Processing LLC and the University of Massachusetts Lowell will utilize a Design of Experiments approach, combined with analytical modeling, to identify the critical material, slitting, spooling, and AFP parameters that influence the repeatable, high quality laydown of ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  8. Bifunctional Regenerative Electrochemical Air Transformation for Human Environments

    SBC: SKYRE, INC            Topic: T6

    The proposed Bifunctional Regenerative Electrochemical Air Transformation for Human Environments (BREATHE) for life support and habitation is part of the atmosphere revitalization equipment necessary to provide and maintain a livable environment within the pressurized cabin of crewed spacecraft. Sustainable Innovations (SI) has developed a novel solid state technology for gas compression based on ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  9. Regeneratively Cooled Ceramic Matrix Composite Nozzle Assembly for Reduced Weight

    SBC: PHYSICAL SCIENCES INC.            Topic: T9

    All rocket missions benefit from having lower structural mass and higher specific impulse, both of which contribute to larger payload fractions and therefore lower mission cost. High temperature materials such as ceramic matrix composites (CMCs) are an avenue to lower engine mass because of the low density and high specific strength of the material. They also have a high maximum temperature and so ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  10. Engineering and Qualification of Thin-Ply Composites

    SBC: Roccor, LLC            Topic: T12

    This body of research focuses on developing fundamental engineering qualification methods for Thin-Ply High Strain Composites (TP-HSCs). Roccor will collaborate with NASA and Dr. Kwok of the University of Central Florida to develop and validate a robust framework for engineering the viscoelastic behavior of highly strained thin-ply composites. The material systems studied will be highly focused on ...

    STTR Phase I 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government