You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Embedded UV Combustion Sensor
SBC: ASTROPOWER, INC. Topic: N/AN/A
SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency -
Multivariate Monitor System for Plasma Etch Reactors
SBC: Chromex Inc. Topic: N/ACHROMEX proposes to develop a monitor system for plasma etch reactors that will, in the Phase I program, demonstrate much improved endpoint detection when compared to currently availabe systems. The Phase II research will extend the monitoring capabilities to all important plasma parameters. The system will provide the feedback information to the reactor controller necessary to produce a flexible ...
SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency -
Oxygen Enriching Membranes for Advanced Marine Internal Combustion Engines
SBC: COMPACT MEMBRANE SYSTEMS, INC. Topic: N/AN/A
SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency -
INTELLIGENT EMERGENCY MEDICAL SERVICES SYSTEM SIMULATION- IEMS(3)
SBC: Data Communications Corp. Topic: N/ATHE PURPOSE OF THIS RESEARCH PROJECT IS TO DETERMINE THE FEASIBILITY OF MERGING AN EMERGENCY MEDICAL SERVICES (EMS) SIMULATOR WITH GEOGRAPHICAL INFORMATION SYSTEMS (GIS) IN ORDER TO PRODUCE IEMS(3) (INTELLIGENT EMERGENCY MEDICAL SERVICES SYSTEMS SIMULATOR), A PC-BASED SYSTEM WHICH CAN BE USED FOR BOTH ADDRESSING STRATEGIC PLANNING ISSUES OF EMS SYSTEMS (E.G., SYSTEM CONFIGURATION; VEHICLE LOCATION ...
SBIR Phase I 1994 Department of Transportation -
Thermoplastic Armor Systems for Aircraft and Light/Ultralight Vehicles
SBC: Dyna East Corp. Topic: N/AThe survivability of vehicles and aircraft is greatly dependent on their mobility and level of armor protection. In most cases, mobility is best served by minimizing mass. Conversly, the level of protection afforded by an armor system is usually directly proportional to its mass. This leads to the difficult trade off of protection versus mobility. There- fore, armor systems with increased levels o ...
SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency -
RESTRICTED VISIBILITY WARNING SYSTEM
SBC: Ecotek International Topic: N/AECOTEK INTERNATIONAL PROPOSES AN ALL SOLID-STATE VISIBILITY MONITORING SYSETM THAT WILL BE USED TO MONITOR VISIBILITY CONDITIONS ALONG ROADWAYS AND WARN TRAVELERS OF LOW VISIBILITY CONDITIONS. THE PURPOSE OF THE SYSTEM IS TO REDUCE THE NUMBER OF MULTIPLE-VEHICLE COLLISIONS AND CONSEQUENT FATALITIES, INJURIES, AND PROPERTY DAMAGES. THE SYSTEM IS BASED ON AN INNOVATIVE APPROACH TO A WELL-ESTABLISHED ...
SBIR Phase I 1994 Department of Transportation -
InP Channel HEMT Development for MM-Wave Power Applications
SBC: Quantum Epitaxial Designs, Topic: N/AMillimeter-wave system designers are limited to two terminal devices when high powers are required from a solid state device. InGaAs/InAlAs HEMTs latticed matched to InP substrates have produced excellent low noise results at millimeter-wave frequencies. The high power performance, however, is limited by the narrow bandgap of the InGaAs chamel which leads to low breakdown voltages between the drai ...
SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency -
Post Exposure Bake Monitoring of Chemically Amplified Resists Using Scatterometry
SBC: Sandia Systems, Inc. Topic: N/AWe will demonstrate the capability of scatterometry to provide a process monitor to post exposure bake of chemically amplified photoresist. Two or more scatterometers will be designed that are capable of monitoring the intensities of multiple diffraction orders that result from illuminating device patterns of photoresist. The goal is to demonstrate the capability of scatterometry to provide a PEB ...
SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency -
In-Situ Measurement of Plasma Deposition Coating Thickness
SBC: TECHNICAL SOLUTIONS, INC. Topic: N/AA significant problem in precision manufacturing of large parts/assemblies is the requirement to make measurements over the surfacesof these parts for a variety of reasons including inspection/quality control; control of surfacing operations such as coatings, abrasive erosion, buffing, and texturing; and generation of "as built" documentation. A specific instance of this class of problem has been ...
SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency -
ADVANCED MATERIAL CONCEPTS FOR GUARDRAIL END TREATMENTS
SBC: United Dynamics, Inc. Topic: N/AGUARDRAIL TERMINALS ARE SOME OF THE MORE TROUBLESOME AND POTENTIALLY HAZARDOUS ROADSIDE APPURTENANCES. RECENTLY DEVELOPED TERMINAL CONCEPTS WHICH HAVE PASSED CURRENT CRASH TEST CRITERIA TEND TO BE EXPENSIVE AND MAY REQUIRE EXCESSIVE LENGTH OF NEED, FLARE-OUT SPACE AND ADDITIONAL FILL AND GRADING. THIS PHASE I SBIR PROPOSAL ADDRESSES THE DEVELOPMENT OF A MORE EFFICIENT ENERGY ABSORBING TERMINAL CON ...
SBIR Phase II 1994 Department of Transportation