You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fiber Optic Amplifier Pump Combiners with Signal Feed Throughput

    SBC: SUB-MICRON ENGINEERING CORP            Topic: AF131011

    ABSTRACT: For this SBIR topic, we have proposed a novel high-power optical fiber pump combiner design that addresses the specific challenges associated with counter-pumping large-mode-area (LMA) double-clad gain fibers. Based on modeling and design optimization, we will fabricate kilowatt capable power combiner prototypes for pump coupling to double-clad Yb-doped polarization-maintaining (PM) fi ...

    SBIR Phase I 2013 Department of DefenseAir Force
  2. Speedy Sparse Bundle Adjustment for Video/Image Sequences

    SBC: VISION SYSTEMS INC            Topic: AF131151

    ABSTRACT: VSI proposes a flexible sensor estimation framework for airborne calibration processing of image streams over long time periods. The components of the framework will consist of existing software and libraries. The plugin-based framework provides flexibility to switch the components easily. The core of the framework is a belief propagation engine to globally optimize the sensor parameter ...

    SBIR Phase I 2013 Department of DefenseAir Force
  3. Novel Standoff Detection of Material Damage Precursors for Structural Health Monitoring and Prediction

    SBC: PNTS INCORPORATED            Topic: A13016

    Because of the overwhelming migration to composites, particularly exotic thermoset materials from the bismaleimide (BMI) family, the PNTS team is focusing its work on this topic on composite structures. The team's high level approach will be to demonstrate an innovative and practical design using dielectric spectroscopy at millimeter wave through terahertz frequencies that will provide compos ...

    SBIR Phase I 2013 Department of DefenseArmy
  4. Packaging High Power Photodetectors for 100 MHz to 100 GHz RF Photonic Applications

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: AF131142

    ABSTRACT: In this SBIR effort we will develop a packaging process and demonstrate (Phase I) a prototype of high power Photodiode (PD) that has a normal incident, pigtailed fiber input and a coaxial RF output that operates from DC to>60GHz. We will apply and extend (Phase II) the aforementioned packaging process to single PD, balanced PD and array of PDs that work from DC through entire W-band. De ...

    SBIR Phase I 2013 Department of DefenseAir Force
  5. Low cost Diplexer for High performance phased array antenna

    SBC: PRINCETON MICROWAVE TECHNOLOGY INC            Topic: AF131148

    ABSTRACT: Princeton Microwave Technology [PmT] is proposing the development of compact microstrip based dual mode resonators for the the design of the low cost diplexers for the GDPAA program.Miniature dual mode resonator based diplexers, in which the main feature and advantage lies in the fact that each of the dual mode resonators can be used as a doubly resonant circuit and therefore requires h ...

    SBIR Phase I 2013 Department of DefenseAir Force
  6. Packaging High Power Photodetectors for 100 MHz to 100 GHz RF Photonic Applications

    SBC: DISCOVERY SEMICONDUCTORS, INC.            Topic: AF131142

    ABSTRACT: Discovery Semiconductors will assemble high power InGaAs/InP photodiodes with 50 ohm internal termination in a fiber-pigtailed, W1-connectorized microwave package having the following specifications: (a) Responsivity>0.7 A/W at 1550 nm wavelength; (b) -3 dB Bandwidth>60 GHz; (c) -9 dB Bandwidth>80 GHz; (d) 1 dB Compression Photocurrent>50 mA @ 60 GHz modulation frequency and>50% mo ...

    SBIR Phase I 2013 Department of DefenseAir Force
  7. Long-distance 3-D Reconstruction from EO/IR Imagery

    SBC: VISION SYSTEMS INC            Topic: AF131133

    ABSTRACT: While the state of the art in both single-image reconstruction algorithms and multi-view structure from motion algorithms have advanced considerably in recent years, little work has been performed which leverages the constraints relied upon by both approaches. When an area of interest is imaged from a long distance with little angular diversity in viewpoint, multi-view constraints alon ...

    SBIR Phase I 2013 Department of DefenseAir Force
  8. Electro-Optically Guided Radar Imaging

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: A13040

    Millimeter-wave RADAR imaging holds significant promise for many applications from rotorcraft DVE mitigation to standoff security screening. A key challenge of this imaging modality, however, has been the implementation of an effective method for creating an image without relying on either mechanical scanning or expensive, high SWAP phased array techniques. Herein, we present a concept for creat ...

    SBIR Phase I 2013 Department of DefenseArmy
  9. "Night Glow"Short Wave Infrared LED (NSLED) Image Projector Development

    SBC: Chip Design Systems Inc.            Topic: AF131098

    ABSTRACT: This project aims to develop a Short Wave Infrared band image projector to provide real time detector stimulation with high dynamic range. Our emitter technology is based on GaInAsSb quaternary semiconductor LED arrays hybridized to CMOS read-in integrated circuits. This project leverages read-in circuit design and control electronics that were developed under SLEDS - a longer wavelengt ...

    SBIR Phase I 2013 Department of DefenseAir Force
  10. Channel and Interference adaptive SATCOM Digital beam-former

    SBC: MAXENTRIC TECHNOLOGIES LLC            Topic: AF131048

    ABSTRACT: As the size, cost, and power consumption of digital signal processing platforms continue to drop and their performance improves, incorporating digital beam-former (DBF) designs into future SATCOM satellite payloads has become an increasingly attractive option. The advantages offered by digital beam-forming stem from the ability to create composite antenna patterns that vary with both s ...

    SBIR Phase I 2013 Department of DefenseAir Force
US Flag An Official Website of the United States Government