List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. "Transportation Planning Decision Support Systems"

    SBC: In Motion            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  2. "Transportation Planning Decision Support Systems"

    SBC: In Motion            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Transportation
  3. A High Efficiency SACI 1 kW Generator System with Integrated Waste Energy Recovery

    SBC: Air Squared, Inc.            Topic: DEFOA0001380

    We propose a novel high efficiency (≈40%) generator system capable of providing 1 kWe along with hot water on-demand. The integration of two novel concepts: 1) an internal combustion engine (ICE) operating on Spark-Assisted Compression Ignition (SACI) combustion of natural gas (NG), and 2) a bottoming Organic Rankine Cycle (ORC) with waste energy recovery (WER) from ICE exhaust enables the overa ...

    SBIR Phase I 2015 Department of EnergyARPA-E
  4. A High Efficiency SACI 1 kW Generator System with Integrated Waste Energy Recovery

    SBC: Air Squared, Inc.            Topic: DEFOA0001380

    We propose a novel high efficiency (≈40%) generator system capable of providing 1 kWe along with hot water on-demand. The integration of two novel concepts: 1) an internal combustion engine (ICE) operating on Spark-Assisted Compression Ignition (SACI) combustion of natural gas (NG), and 2) a bottoming Organic Rankine Cycle (ORC) with waste energy recovery (WER) from ICE exhaust enables the overa ...

    SBIR Phase II 2015 Department of EnergyARPA-E
  5. A High Efficiency SACI 1 kW Generator System with Integrated Waste Energy Recovery

    SBC: Air Squared, Inc.            Topic: DEFOA0001380

    We propose a novel high efficiency (≈40%) generator system capable of providing 1 kWe along with hot water on-demand. The integration of two novel concepts: 1) an internal combustion engine (ICE) operating on Spark-Assisted Compression Ignition (SACI) combustion of natural gas (NG), and 2) a bottoming Organic Rankine Cycle (ORC) with waste energy recovery (WER) from ICE exhaust enables the overa ...

    SBIR Phase II 2015 Department of EnergyARPA-E
  6. A New Nanocomposite Rubber Liner for Tires

    SBC: TDA Research, Inc.            Topic: N/A

    Halobutyl rubber is used as an inner liner for tubeless automotive tires because of its low permeability to gases and good compatibility with other tire materials. However, at high pressures and over prolonged time periods, tires leak. Factors such as under-inflation and heat are major contributors to tire damage. While the tires are slowly losing air pressure, consumers also do not maintain c ...

    SBIR Phase I 2001 Department of Transportation
  7. A New Process for Rare Earth Metals Recovery

    SBC: TDA Research, Inc.            Topic: DLA161003

    The recovery, separation and purification of rare earth elements are very difficult because they all have very similar properties.Solvent extraction is the most commonly used industrial separation method, but it is expensive due to the need for a large number of separation stages that are required.TDA Research Inc. (TDA) proposes to develop a new supported liquid membrane contactor that uses the e ...

    SBIR Phase I 2016 Department of DefenseDefense Logistics Agency
  8. Advanced Battery Manufacturing Technologies

    SBC: Xerion Advanced Battery            Topic: DLA142001

    Xerion Advanced Battery Corp (XABC) proposes Advanced Battery Manufacturing Techniques for High Performance, Low Cost Lithium Ion Batteries. XABC has developed a 3D battery electrode called StructurePore that allows for rapid ion and electron transport, enabling 5 minute charge times at 280Wh/kg on a positive + negative electrode basis. StructurePore batteries utilize a novel manufacturing metho ...

    SBIR Phase I 2014 Department of DefenseDefense Logistics Agency
  9. Advanced Battery Manufacturing Technologies

    SBC: ADA Technologies, Inc.            Topic: DLA142001

    ADA Technologies, Inc. (ADA) in partnership with Laser Marks, a laser systems integrator, has designed, developed (Phase I) and will fabricate a low-cost, automated, high-speed/high-throughput Li-ion electrode cutter capable of producing high quality electrodes in an additive manufacturing environment. Utilizing the latest in laser technology and scanning systems coupled with innovative design and ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  10. Advanced Battery Manufacturing Technologies

    SBC: Xerion Advanced Battery Corporation            Topic: DLA142001

    In Phase I, XABC scaled the capability to produce nanostructured LCO cathodes using an electroplating process.In this phase II proposal, XABC proposes to further demonstrate this unique manufacturing capability to produce full cell batteries with enhanced performance and reduced cost in DLA products, as a precursor to XABC becoming a domestic manufacturer of electrochemical cells.This Phase II pro ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government