You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Coating Existing Concrete Barriers to Reduce Rollover Potential

    SBC: Nanosonic Inc.            Topic: 121FH1

    The objective of this DoT SBIR program is to further establish the technical foundation of low friction HybridSil® Slippery Overturn Automobile Protection (SOAP) coatings on concrete barriers for drastic reductions in vehicle rollover potential and significantly increased concrete impact durability thus, enabling the rapid commercial integration of these coatings. To meet this challenge, NanoSoni ...

    SBIR Phase II 2013 Department of Transportation
  2. Dynamic Frequency Passive Millimeter-Wave Radiometer Based on Optical Up-Conversion

    SBC: Phase Sensitive Innovations, Inc.            Topic: 941D

    In the proposed effort, we will leverage this extensive experience and capabilities to realize a frequency agile mmW radiometer that can cover the range of DC-110 GHz and can be scaled to DC-200 GHz under Phase II. Ours is a photonic system that multiplies and up-coverts a low-frequency reference signal onto an optical carrier (laser) using EO modulation, then uses the modulation sidebands to inj ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  3. Improving Commercial Fish Meal Free Aquaculture Diets

    SBC: Low Salinity, Inc.            Topic: 922F

    The current emphasis in fish nutrition is fish meal replacement with a variety of alternative protein sources including plant-based, terrestrial and marine proteins. We propose to focus specifically upon the protein quality of these alternate protein sources and its potential impacts on marine fish production. Animal byproduct meals created through the rendering industry are widely utilized as i ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Buoy Guard System

    SBC: McQ Inc.            Topic: 932W

    McQ will develop a complete conceptual design for a Buoy Guard System (BGS). This system will detect the presence of intruders at and on the buoy. It will initiate deterrent actions to persuade and force the intruders away from the buoy. It will also collect imagery and other data about the intruders and about their activities associated with the buoy. This data, along with the basic warning w ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Augmenting Inductive Loop Vehicle Sensor Data with SPAT and GrID (MAP) via Data Fusion

    SBC: Harmonia Holdings Group, LLC            Topic: 111FH2

    Our goal is to create a demonstrable software system that we call IntelliFusion, which fuses Connected Vehicle data with data from traditional inductive loop detectors and uses this data to improve traffic control at intersections across the country. Our work will improve the safety of intersections and improve the mobility of traffic through adaptive traffic control which uses data produced by I ...

    SBIR Phase II 2013 Department of Transportation
  6. Creating Spatial Disorientation in Flight Simulation

    SBC: Continuum Dynamics Inc            Topic: 122FA1

    Training in the symptoms of Spatial Disorientation (SD) has shown to be valuable in aiding pilots to recognize its onset and provide a means for mitigating its effects, but such demonstrations have traditionally been associated with specialized equipment and devices. Since the vast majority of pilots for the commercial aviation jet fleet are trained (or recertified) on 6-degree-of-freedom (DOF) h ...

    SBIR Phase I 2013 Department of Transportation
  7. Inline Material Electrical Characterization Sensor (IMECS)

    SBC: PANERATECH, INC.            Topic: N/A

    There is no capability to rapidly assess the electrical properties of nanofiber films during manufacturing and prepregging process. Continuous monitoring of these films will guide the U.S. nanofiber manufacturing industry in optimizing and increasing the yield rate with proper process optimization and avoid any inconsistency in the process and the cost with associated waste material. To address th ...

    SBIR Phase II 2013 Department of CommerceNational Institute of Standards and Technology
  8. Smart Manufacturing Workflow Environment

    SBC: Nimbis Services, Inc.            Topic: N/A

    Nimbis in partnership with UCLA and Smart Manufacturing Leadership Coalition (SMLC) will provide an open workflow environment that supports the sequential execution of 3rd party APPS using net-worked information based modeling and data analytic technologies to integrate manufacturing intelligence across an entire manufacturing ecosystem. The SMWE leverages Nimbis commercial cloud technical analysi ...

    SBIR Phase I 2013 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government