List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Software Package for Material Model Evaluation

    SBC: APTEK, Inc.            Topic: N/A

    This Phase I and II SBIR will develop a user-friendly, run-time efficient software package dedicated to fitting and evaluating material models used in finite element codes like LS-DYNA. The software package will consist of a pre-processor, a core driver, and a post-processor. The pre-processor will allow the user to specify the material model, model parameters, and desired load history. The dri ...

    SBIR Phase I 2001 Department of Transportation
  2. A New Nanocomposite Rubber Liner for Tires

    SBC: TDA Research, Inc.            Topic: N/A

    Halobutyl rubber is used as an inner liner for tubeless automotive tires because of its low permeability to gases and good compatibility with other tire materials. However, at high pressures and over prolonged time periods, tires leak. Factors such as under-inflation and heat are major contributors to tire damage. While the tires are slowly losing air pressure, consumers also do not maintain c ...

    SBIR Phase I 2001 Department of Transportation
  3. Recycling of Portland Cement Concrete

    SBC: Road Processing Resources Inc.            Topic: N/A

    This proposal is to investigate a concept of a shock producing component that will be the basis of a machine to remove deteriorated concrete pavement. The principal has been proven feasible, but further demonstration has to be accomplished to proceed with application and expense of continued development of a Road Remover/Recycler. This machine will move continuously on a lane width of pavement a ...

    SBIR Phase I 2001 Department of Transportation
  4. An Optimized Semi-Flush Flasher

    SBC: Thoughtventions Unlimited Llc            Topic: N/A

    It is proposed to develop a full prototype next-generation semi-flush flasher system for airport runway approach lighting. Current systems are many years old and inefficient; airports need inset flashers to add runway length and more efficiently use strictly limited land allocations. An inset flasher is proposed that is optimized both optically and electrically. A flasher fixture based on the P ...

    SBIR Phase I 2001 Department of Transportation
  5. An Optimized Semi-Flush Flasher

    SBC: Thoughtventions Unlimited Llc            Topic: N/A

    It is proposed to develop a full prototype next-generation semi-flush flasher system for airport runway approach lighting. Current systems are many years old and inefficient; airports need inset flashers to add runway length and more efficiently use strictly limited land allocations. An inset flasher is proposed that is optimized both optically and electrically. A flasher fixture based on the P ...

    SBIR Phase II 2001 Department of Transportation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government