You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Manufacturing of Piezoelectric Textured Ceramic Materials

    SBC: QORTEK INC            Topic: N222111

    Textured piezoceramics is now of increasing interest to the underwater acoustic community due to their performance and/or cost benefits compared to conventional PZT and single crystals. Recent work at QorTek has shown the technology to increase source level and provide larger bandwidth relative to Type III PZT ceramics for specific designs. This enables form factor reductions and/or improved perfo ...

    SBIR Phase I 2023 Department of DefenseNavy
  2. Low-profile High-Frequency Maritime Antenna?

    SBC: SABRE SYSTEMS INC            Topic: N222112

    This program will address antenna design characteristics which can reduce the size of HF antennas for the small maritime craft while providing increased instantaneous bandwidth to provide higher data rates with higher reliability. We will apply our extensive HF experience in wideband HF ground/airborne antenna development coupled with previous efforts in conformal antennas on unique platforms to a ...

    SBIR Phase I 2023 Department of DefenseNavy
  3. Physics-enhanced AI/ML tool for additive manufacturing defect detection and prediction

    SBC: QUESTEK INNOVATIONS LLC            Topic: N222117

    Through this proposed SBIR effort, QuesTek Innovations LLC will develop a physics-enhanced machine learning (ML) software to reduce exhaustive typical on-destructive testing or enable feed forward control methodologies for fabrication of high-quality additive manufacturing (AM) component. Process induced defects like keyholing and lack of fusion porosity are shown to be strongly correlated with AM ...

    SBIR Phase I 2023 Department of DefenseNavy
  4. Active Low-Voltage Thin-Film Lithium Niobate Electro-Optic Modulator

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: N231010

    The primary technical objective of the proposed effort will be to investigate integration of optical gain medium with thin-film lithium niobate on insulator (TFLNOI) optical waveguides. Recent developments in crystal ion-sliced (CIS) TFLNOI have enabled a new class of electro-optic modulators and photonic integrated circuits with tighter mode confinement, a compact footprint, ultra-high bandwidth, ...

    SBIR Phase I 2023 Department of DefenseNavy
  5. Compact, High-Performance Metamaterial Acoustic filter with Monolithic Integrated Signal Processor

    SBC: RDA INC.            Topic: N231012

    The Navy is seeking to leverage the advances in acoustic metamaterials to reduce the power consumption and cost of electronic components in hydrophone systems. There are significant challenges involved in improving the signal-to-noise ratio (SNR) and post-processing requirements, with a goal of a 10 times improvement in SNR and a 1000 times reduction in post-reception and post-detection informatio ...

    SBIR Phase I 2023 Department of DefenseNavy
  6. Practical Resolution-Oriented Planner with Error Labeling (PROPEL)

    SBC: TDI NOVUS INC            Topic: N231028

    Navy vessels rely on proper functioning of their Hull, Mechanical, and Electrical (HM&E) systems to perform their missions. However, faults and errors can occur unexpectedly, causing downtime and potentially hazardous situations. To address this issue, TDI Novus proposes PROPEL to detect, analyze, and classify faults and errors in real-time using probabilistic fault models trained on historical se ...

    SBIR Phase I 2023 Department of DefenseNavy
  7. Radar Transparent Protective Cover for AN/SPY-1 Array- MSC P4772

    SBC: MATERIALS SCIENCES LLC            Topic: N231033

    The Department of the Navy (DON) has issued a broad agency announcement as part of the Small Business Innovative Research (SBIR) program soliciting proposals for the development of a protective cover for the AN/SPY-1 radar array that will extend the service life of the coating material protecting the front face of the array, which is an Room Temperature Vulcanizing (RTV) silicone which approximate ...

    SBIR Phase I 2023 Department of DefenseNavy
  8. N231-034- Open Architecture Telemetry First Level Multiplexer with Array Power Distribution

    SBC: QORTEK INC            Topic: N231034

    As anti-submarine warfare (ASW) technologies expanded rapidly during the Cold War, towed array systems such as Surveillance Towed Array Sonar System (SURTASS) were deployed with outstanding success at detecting submarines. Later TB-29(A) and TB-34 along with the Multi-Function Towed Array (MFTA) have further increased detection capabilities. This proposal aims to develop an OAT first level multipl ...

    SBIR Phase I 2023 Department of DefenseNavy
  9. Perceptually Lossless Unmanned Underwater Vehicle (UUV) Sensor Data Compression

    SBC: DANIEL H WAGNER ASSOCIATES INC            Topic: N231038

    The critical role Unmanned Underwater Vehicles (UUV) play in Naval operations is constrained by their ability to send large volumes of sensor data to warfighters. Thus, compression technology which retains all features of the data needed for human analysis, called perceptually lossless compression, is required. Additionally, our Autoencoder Compression Enhancement for UUV Sensor Data (ACE4USD) sys ...

    SBIR Phase I 2023 Department of DefenseNavy
  10. Low-Temperature Gasketing Material

    SBC: AUGUST RESEARCH SYSTEMS INC            Topic: N231043

    August Research Systems, Inc. (ARS) proposes to derive gasketing material suitable for the most extremely frigid terrestrial temperatures from a family of unique polyurethanes that have been in development for aerospace applications for nearly a decade. Such materials have glass transition temperatures below -90 deg F and are impervious to water and hydrocarbon fluids, even at elevated temperature ...

    SBIR Phase I 2023 Department of DefenseNavy
US Flag An Official Website of the United States Government