Award Data

Although the market clearly has several ride quality meters commercially available, the FRA wishes to investigate the possibility of designing a very compact and ultra portable ride quality meter (UPRQM) for allowing railroad inspectors to assess ride safety and quality on revenue trains as well as track locations responsible for the worst ride. Given the emergence of micro-electro-mechanical sys ...

In 2006, the FRA introduced a Notice of Proposed Rulemaking (NPRM) to enhance intra-train communications on Tier I passenger cars. This rulemaking would promote the safety of passengers and crew members in passenger train emergencies by enhancing FRA's regulations for passenger train emergency systems. The rulemaking specifically addresses passenger train emergency communication systems, includi ...

This proposal describes the application of a mature nanotechnology-based crack arrest / structural repair technology as a novel crack arrestor tool for high-strength pipelines. The crack arrestor would comprise a thin layer or sleeve of electrodeposited nanocrystalline material applied to the outside of the pipe either in the coating mill during fabrication or in-field during or following constru ...

This proposal describes the application of a mature nanotechnology-based crack arrest/structural repair technology as a novel in-field pipeline repair tool. The repair would be comprised of a thin layer or sleeve of electrodeposited nancrystalline material applied to the damaged region of the pipe in order to utilize the "crack filling" characteristic of the process. The concept proposed has alr ...

Research is proposed to develop a locking mechanism for intercity (Amtrak) rotating seats that can be retro-fit to existing seats. Current intercity rail seats, according to the National Transportation Safety Board (NTSB), present a safety hazard to the riding public. Post accident investigations show that passenger rail seats were found to have been uncontrollably rotated even though current se ...

Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

Transecurity is a company whose mission is to commercialize technology developed at the Virginia Tech Transportation Institute. VTTI researchers and engineers have made significant breakthroughs in driver monitoring, crash risk assessment, and crash avoidance technology including drowsy driver monitoring and warning systems. Technical solutions under development include machine vision-based lane ...

The Ultra Portable Ride Quality Meter (UPRQM) is a cost-effective, flexible tool that can evolve (with minimal effort) as new GPS and accelerometer devices become commercially available. Each generation of these sensor devices is more responsive, more sensitive, and more accurate than the last generation. The time between generations is also decreasing such that accelerometer and GPS technology ...

During Phase 1 of the project, Sharma & Associates, Inc. developed a concept for high speed freight truck intended for 70-ton, regular freight and bi-modal operation, at speeds up to 150 mph. The truck uses a rigid frame and an indpendent, compliant, primary suspension for its basic architecture. Constant contact side-bearings and yaw dampers were also added to improve dynamic performance. Vehi ...

Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...