List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Hybrid Laser Arc Welding for Thick Plate High Performance Steels

    SBC: TECHKNOWSERV CORP            Topic: 132FH1

    High performance steels were developed in a cooperative program between the Federal Highway Administration (FHA), the American Iron and Steel Institute (AISI), and the U.S. Navy Carderock Division of the Naval Surface Warfare Center. HPS70W high strength steel is currently being used in bridge structures. HPS is stronger than conventional 70W steel and has less than 15% of the sulfur and 60% of th ...

    SBIR Phase I 2014 Department of Transportation
  2. Novel CO2 Gas Sensors for Autonomous Measurement of Ocean Carbon

    SBC: DIOXIDE MATERIALS, INC.            Topic: 82

    The objective of the proposed work is to determine whether Dioxide Materials' miniature C02 sensors have the potential to be adapted for autonomous measurement of ocean carbon. The existing sensors have many advantages for measurements of ocean carbon. They are much smaller and less costly than the existing sensors, work with much smaller gas samples, and use much less power. The sensors were d ...

    SBIR Phase I 2014 Department of CommerceNational Oceanic and Atmospheric Administration
  3. 120-X-2 Unmanned Aircraft System-Borne Atmospheric & Sea Surface Temperature (SST) Sensing

    SBC: Piasecki Aircraft Corporation            Topic: 84

    To capture critical weather and SST data in the Tropical Cyclone Boundary Layer (TCBL), Piasecki Aircraft proposes to evaluate existing meteorological sensor packages, integrate new off-the-shelf MEMS sensors, and design an air-launched UAS to improve the resolution of observations captured in the TCBL. Capturing latent and sensible heat fluxes can be achieved reliably with a powered UAS (compare ...

    SBIR Phase I 2014 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Self-Contained Sub-Centimeter Positioning Platform

    SBC: TRUNAV LLC            Topic: 81

    The goal of this project is to develop, implement, and experimentally validate a new Differential Global Navigation Satellite System (DGNSS) capable of providing sub-centimeter positioning accuracy for quasi-static scientific, mapping, and survey applications. The main feature of the proposed DGNSS solution is that it leverages GNSS reference data from existing NOAA's Continuously Operational Ref ...

    SBIR Phase I 2014 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Dynamic Frequency Passive Millemeter-Wave Radiometer Based on Optical Up-Conversion

    SBC: Phase Sensitive Innovations, Inc.            Topic: 94

    Passive microwave sensors aboard satellites provide valuable information regarding weather conditions by measuring atmospheric attenuation over a broad range of frequencies from 0-200 GHz. Additional ground-based sensors are desirable to provide complementary upward looking measurements that can be used to refine existing attenuation models. Operating over such a large bandwidth, however, places ...

    SBIR Phase II 2014 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Innovative Solutions to Improve Performance of Railroad Switch Frogs & Turnouts

    SBC: Sharma & Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of Transportation
  7. Conceptual Design of a 'Tri-Coupler' System

    SBC: Sharma & Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of Transportation
  8. Instrumented Anchor Pin for Heavy Truck Brake

    SBC: Stratcom International Llc            Topic: N/A

    The bonded resistance strain gage has made possible a varety of force sensing transducers, commonly known as "load cells." Widely used types of load cells include the column, the bending beam, the ring, the circular plat and the shear web. To instrument the anchor pins used in heavy truck air braking systems, STRAINSERT will utilize proven research and evaluation techniques implemented during th ...

    SBIR Phase II 1997 Department of Transportation
  9. Innovative Energy Absorbing Composite Utility Poles

    SBC: TECHNOLOGY DEVELOPMENT GROUP, INC.            Topic: N/A

    Utility poles present a serious roadside hazard due to the large number of poles located in close proximity to the roadways and the unforgiving nature of existing pole designs. Breakaway wooden utility poles have been developed over the past twenty years in an effort to improve utility pole safety, but these designs have not gained widespread acceptance. In order to realize safer utility poles w ...

    SBIR Phase II 1997 Department of Transportation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government