You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Collection of Motorcycle Exposure and Crash Factor Data
SBC: AUTONOMOUS INNOVATIONS, INC. Topic: N/AAutonomous Innovations Inc. (AII) proposes to develop a novel comprehensive monitoring system for motorcycles that will monitor vehicle miles traveled (VMT), as well as a varity of physical measurements, to understand the exposure and factors in the increased numbers of accidents among motorcycles riders. All has extensive experience in developing and integrating sensors and data-logging for a va ...
SBIR Phase I 2008 Department of Transportation -
Crack Arrest and Structural Repair of High Strength Steel Piping by In-Situ Sleeving of Nanostructural Materials
SBC: Integran Technologies U.S.A. Inc. Topic: 07PH1This proposal describes the application of a mature nanotechnology-based crack arrest / structural repair technology as a novel crack arrestor tool for high-strength pipelines. The crack arrestor would comprise a thin layer or sleeve of electrodeposited nanocrystalline material applied to the outside of the pipe either in the coating mill during fabrication or in-field during or following constru ...
SBIR Phase I 2008 Department of Transportation -
Structural Repair of Steel Piping by In-Situ Sleeving of Nanostructured Materials
SBC: Integran Technologies U.S.A. Inc. Topic: N/AThis proposal describes the application of a mature nanotechnology-based crack arrest/structural repair technology as a novel in-field pipeline repair tool. The repair would be comprised of a thin layer or sleeve of electrodeposited nancrystalline material applied to the damaged region of the pipe in order to utilize the "crack filling" characteristic of the process. The concept proposed has alr ...
SBIR Phase I 2008 Department of Transportation -
Compact Laser Shearography System for Crack Detection
SBC: Laser Technology Inc. Topic: 05FH1Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...
SBIR Phase II 2008 Department of Transportation -
Low Cost Transverse Rail Defect Detector
SBC: Mide Technology Corporation Topic: 02FR1Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...
SBIR Phase II 2008 Department of Transportation -
High-Speed Dynamic 3D Surface Mapping System
SBC: Conrad Technologies, Inc. Topic: N/AConrad Technologies, Inc. (CTI) proposes a non-contact, dynamic 3D position sensor based on optical triangulation using multiple radiating LED targets to measure intrusion of an automobile structure into the occupant compartment during full-scale crash tests. CTI has significant experience developing non-contact measurement instruments. CTI has developed a Motion Imaging and Tracking Acquisition ...
SBIR Phase I 2002 Department of Transportation -
Evaluation of Composite Joints in General Aviation Structures
SBC: MATERIALS SCIENCES LLC Topic: N/ADuring the Phase I program, MSC demonstrated a powerful new software tool designed for the analysis of bonded joints in General Aviation (GA) aircraft. The tool can handle the complex geometry and boundary conditions found in typical joints, and has been shown to be exceptionally accurate. An easy-to-use front end to the code was also demonstrated. In addition, Materials Sciences Corporation (M ...
SBIR Phase II 2002 Department of Transportation -
Evaluation of Composite Joints in General Aviation Structures
SBC: MATERIALS SCIENCES LLC Topic: N/ADuring the Phase I program, MSC demonstrated a powerful new software tool designed for the analysis of bonded joints in General Aviation (GA) aircraft. The tool can handle the complex geometry and boundary conditions found in typical joints, and has been shown to be exceptionally accurate. An easy-to-use front end to the code was also demonstrated. In addition, Materials Sciences Corporation (M ...
SBIR Phase I 2002 Department of Transportation -
DEVELOPMENT OF ANGULAR ACCELEROMETER
SBC: A-TECH CORPORATION Topic: N/AN/A
SBIR Phase I 1986 Department of Transportation -
LONGITUDINAL STRESS (FORCE) MEASUREMENT OF RAIL UNDER OPERATING CONDITIONS
SBC: Magnasonics Inc Topic: N/AIN 1982, A SPECIAL COMMITTEE OF THE NMAB ISSUED A REPORT ON THE NONDESTRUCTIVE METHODS THAT MIGHT BE USED TO MEASURE THELOGITUDINAL FORCE IN INSTALLED RAILS. IT SHOWED THAT THE ACOUSTO-ELASTIC EFFECT WHICH INFERS THE STRESS FROM MEASURE MENTS OF SMALL SHIFTS IN THE VELOCITY OF SOUND WAS PROMISINGBUT DIFFICULT TO IMPLEMENT BECAUSE VARIATIONS IN THE METALLURGICAL STRUCTURE OF THE METAL AND UNCERTAIN ...
SBIR Phase II 1986 Department of Transportation