Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Compact Laser Shearography System for Crack Detection

    SBC: Laser Technology Inc.            Topic: 05FH1

    Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

    SBIR Phase II 2008 Department of Transportation
  2. Low Cost Transverse Rail Defect Detector

    SBC: Mide Technology Corporation            Topic: 02FR1

    Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

    SBIR Phase II 2008 Department of Transportation
  3. Dewatering Membrane for Hazy Hydrodesulfurization Unit Effluents

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: 09

    Many refinery product streams, particularly those from Ultra Low Hydrodesulfurisation units, are prone to haze due to water emulsions. Haze is also problematic for biodiesel production, as hazy fuel cannot be used until the haze settles or is removed, which creates costly scheduling and shipping delays. This project will develop a novel membrane process for the removal of dissolved and dispersed ...

    SBIR Phase II 2008 Department of Energy
  4. Nano-Scale High-Surface-Area Thermal and Conductive Ceramics as Effectice Support for Metal Oxide Catalysts in Alkane Selective Oxidation

    SBC: Evernu Technology, Llc            Topic: 07

    Compared with conventional processes used to produce many oxygenated chemicals, processes based on the selective catalytic oxidation of alkanes to produce oxygenates could yield enormous economic, energy, and environmental benefits. However, commercial development of such processes has been hindered, in part, because the excessive heat released by alkane oxidation causes over-oxidation (burning) ...

    SBIR Phase II 2008 Department of Energy
  5. Graphite Foam Heat Exchanger Technology for Energy Recovery

    SBC: Thermal Centric Corporation            Topic: 11

    The recovery of heat currently wasted in exhaust gases can reduce fuel consumption in almost every commercial and industrial sector. In the electricity generation sector alone, even modest improvements in energy recovery effectiveness would result in billions of dollars in savings annually. New materials made from conductive graphite have created a significant opportunity to produce heat exchang ...

    SBIR Phase II 2008 Department of Energy
US Flag An Official Website of the United States Government