Award Data

Situation or Problem In order to provide timely and reliable assessments of the global crop market, it is necessary to move from limited, in situ crop assessments to operational crop monitoring on regional and global scales with multi-temporal remotely sensed (RS) data. Due to timeliness requirements and large volumes of imagery needed for operational agricultural monitoring, it is important that ...

Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

The U.S. forest products industry had sales of $262B in 1997, of which two thirds was used for building construction. The use of wood for home construction is an effective, efficient, environmentally friendly, renewable construction material. A key issue in using wood materials in construction is their susceptibility to mold, fungi, and termite infestation resulting in over $10B combined damage pe ...

During Phase 1 of the project, Sharma & Associates, Inc. developed a concept for high speed freight truck intended for 70-ton, regular freight and bi-modal operation, at speeds up to 150 mph. The truck uses a rigid frame and an indpendent, compliant, primary suspension for its basic architecture. Constant contact side-bearings and yaw dampers were also added to improve dynamic performance. Vehi ...

Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

This study will focus on the further development and optimization of a new method to deliver ozone into process waters employed for washing fruits and vegetables. The FDA has just approved the use of ozone to control pathogens in the food processing industry. Key objectives of this study include development of pilot rig consisting of O3 generation, delivery equipment, while studying overall enhanc ...

During the Phase I program, MSC demonstrated a powerful new software tool designed for the analysis of bonded joints in General Aviation (GA) aircraft. The tool can handle the complex geometry and boundary conditions found in typical joints, and has been shown to be exceptionally accurate. An easy-to-use front end to the code was also demonstrated. In addition, Materials Sciences Corporation (M ...

N/A

This project involves the development of a first-of-its-kind method for fractionation and recovery of industrial viable plant polyphenol material from spent tanning liquor (a.k.a. used color bath), a waste byproduct from the vegetable tanning and chrome retanning industry. Using a newly developed proprietary process currently being submitted for a provisional patent, a pilot facility will be built ...

This project proposes the development of industrial agri-based oil monomers for the preparation of low odor, low VOC architectural latex coatings. The process for preparing acrylate and/or methacrylate monomers derived from castor oil and other industrial oils, such as soybean and linseed oils, involves an acrylate derivatization step. Monomers based on castor oil have been incorporated into latex ...