You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Development of Manufacturing Technology for the Practical Application of Specialized and Environmentally Sensitive Nutrients, Enzymes, Immune-Stimulating Compounds and Biologics to Aquafeeds

    SBC: Zeigler Bros, Inc.            Topic: 823F

    In an effort to support the development of a domestic marine aquaculture industry, Zeigler Bros. Inc., (ZBI) proposes to continue its Phase I research by demonstrating the ability to scale up inclusion particle (IP) manufacturing. During Phase II ZBI will also demonstrate the efficacy of IOs for orally delivering phytase and probiotics to marine finfish. These efforts will directly address the p ...

    SBIR Phase II 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  2. Advanced Long-Range Video Capabilities Using Speckle Imaging Techniques

    SBC: EM PHOTONICS INC            Topic: A402

    Flight-testing is a crucial component in NASA's mission to research and develop new aeronautical concepts because it allows for verification of simulated and wind-tunnel experiments and exposes previously unforeseen design problems. Video is an invaluable tool for flight-testing, allowing the collection of a wealth of information such as craft position, speed, health, as well as tracking diff ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  3. Innovative High Temperature Heat Pipes for Spacecraft Nuclear Fission Systems

    SBC: Advanced Cooling Technologies, Inc.            Topic: X803

    NASA Glenn is examining small fission reactors for future space transportation and surface power applications. The reactors would have an 8 to 15 year design life and should be available for a 2020 launch to support future NASA science missions. Both 1 kWe thermoelectric and 3 kWe Stirling systems have been examined. Heat pipes are being examined to transfer the thermal energy from the reactor ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  4. High-Volume Production of Lightweight, Multi-Junction Solar Cells Using 6-inch GaAs

    SBC: Microlink Devices, Inc.            Topic: X804

    In the proposed Phase II program, we will transition MicroLink's 6-inch epitaxial lift-off (ELO) solar cell fabrication process into a manufacturing platform capable of sustaining large-volume production. Key Phase II improvements in the ELO process are reduction in cycle time and increase in the yield of large-area devices. In addition, we will transition all critical device fabrication process ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  5. ISS Additive Manufacturing Facility for On-Demand Fabrication in Space

    SBC: Made In Space, Inc.            Topic: O302

    Made in Space has completed a preliminary design review of the Additive Manufacturing Facility. During the first half of Phase 1, the design went through conceptual development, simulation testing, cost analysis, and comparison testing of which off-the-shelf parts can be used. The deliverables for Phase I include a written report detailing evidence of demonstrated technology (TRL 5) in the laborat ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  6. Temperature, Heat Flux and Recession Sensing for Ablative Thermal Protection Systems

    SBC: Industrial Measurement Systems, Inc.            Topic: X901

    The Phase I program demonstrated the efficacy of real-time of ultrasonic recession measurements on low density TPS materials. Measurements on internal echoes established the feasibility of non-intrusive temperature measurements. In the Phase II program we will continue to improve, optimize, and extend the technology. Sensors with better elevated temperature performance will be developed and con ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  7. Space Electronics Operating at High Temperatures and Radiation Levels

    SBC: Qortek, Inc.            Topic: S305

    The objective is to produce high efficiency DC/DC power modules in a small low profile package that can tolerate extreme environment conditions. The primary effort of the Phase II program is to address the need for very high performance power electronics that meet a combination of high radiation tolerance, high thermal tolerance and extremely low EMI susceptibility/radiation. The power modules in ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  8. Computational Modeling in Support of High Altitude Testing Facilities

    SBC: COMBUSTION RESEARCH AND FLOW TECHNOLOGY INC            Topic: O202

    Simulation technology plays an important role in propulsion test facility design and development by assessing risks, identifying failure modes and predicting anomalous behavior of critical systems. This is true for facilities such as the proposed A-3 that will operate at low pressures in conjunction with steam ejectors and the B-2 facility where flame deflector cooling and plume impingement dynami ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  9. Grain Boundary Engineering for Assessing Durability and Aging Issues with Nickel-Based Superalloys

    SBC: Integran Technologies U.S.A. Inc.            Topic: A103

    The Grain Boundary Engineering (GBE) approach, successfully demonstrated in Phase I, that microstructural optimization provides a very significant improvement in reducing susceptibility to intergranular crack initiation and growth in conventional wrought Inconel 718. The principal objective of the Phase II research development program is to extend the applicability of the GBE technology from con ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  10. Lunar All-Terrain Utility Vehicle for EVA

    SBC: ProtoInnovations, LLC            Topic: X703

    ProtoInnovations, LLC proposes to develop a new type of planetary rover called a Lunar All-terrain Utility Vehicle ("LATUV") to assist extra-vehicular activities in future lunar missions. The vehicle will operate unmanned or with an astronaut driving onboard. It will have a roughly 4 m2 footprint and be able to about twice as fast as an astronaut can walk on the Moon. The vehicle will feature four ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government