You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Crack Arrest and Structural Repair of High Strength Steel Piping by In-Situ Sleeving of Nanostructural Materials

    SBC: Integran Technologies U.S.A. Inc.            Topic: 07PH1

    This proposal describes the application of a mature nanotechnology-based crack arrest / structural repair technology as a novel crack arrestor tool for high-strength pipelines. The crack arrestor would comprise a thin layer or sleeve of electrodeposited nanocrystalline material applied to the outside of the pipe either in the coating mill during fabrication or in-field during or following constru ...

    SBIR Phase I 2008 Department of Transportation
  2. Structural Repair of Steel Piping by In-Situ Sleeving of Nanostructured Materials

    SBC: Integran Technologies U.S.A. Inc.            Topic: N/A

    This proposal describes the application of a mature nanotechnology-based crack arrest/structural repair technology as a novel in-field pipeline repair tool. The repair would be comprised of a thin layer or sleeve of electrodeposited nancrystalline material applied to the damaged region of the pipe in order to utilize the "crack filling" characteristic of the process. The concept proposed has alr ...

    SBIR Phase I 2008 Department of Transportation
  3. Compact Laser Shearography System for Crack Detection

    SBC: Laser Technology Inc.            Topic: 05FH1

    Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

    SBIR Phase II 2008 Department of Transportation
  4. Automated High Speed, Low Water Consumption Insulator Cleaner

    SBC: MINI, LLC            Topic: 07FT4

    A novel third rail insulator cleaner and novel cleaning tool - the Spin Wedge, will be developed. The novel cleaner is a skate that rides directly on the third rail and is attached to a service vehicle. Four Spin Wedges, attached to the skate, direct a very rapid series of high pressure water jets arcs, like hammer blows, only on the surface to be cleaned. As the skate moves forward at high spe ...

    SBIR Phase I 2008 Department of Transportation
  5. Microscopic Traffic Flow Simulation Models- An Open Source Approach

    SBC: NEW GLOBAL SYSTEMS FOR INTELLIGENT TRANSPORTATION MANAGEMENT CORPORATION            Topic: 081FH5

    In the Open-source microscopic traffic simulation models project, a component based software framework is proposed to re-engineer CORISM data struture and CORISM interface. Under the architecture combing the innovative framework and the legacy CORISM, prototype of the open source traffic flow simulation models will be developed and demonstrated in the Phase I. In addition, areas identified by th ...

    SBIR Phase I 2008 Department of Transportation
  6. New In-field Composite Repair Techniques for Transmission or Distribution Pipelines

    SBC: Odyssian Technology, L.L.C.            Topic: N/A

    Composite in-field pipeline repair technology is proposed that builds upon recent advances in composite repair techniques. Alternative composite materials and processes are proposed that will substantially ease in-field repair and reduce the time personnel are exposed to potentially adverse environmental conditions. Also proposed is a sensor leak detection system that can be optionally installed ...

    SBIR Phase I 2008 Department of Transportation
  7. Balancing Safety and Capacity in an Adaptive Traffic Signal Control System

    SBC: Sabra & Associates, Inc.            Topic: N/A

    This research is designed to develop a methodology that will identify unsafe traffic conditions such as rear-end, angle and left-turn crashes at individual signalized intersections, and in arterial and grid signalized networks. This research project will have a final product in the form of an algorithms, that would be developed to alleviate such safety risks by adjusting controller timing and ope ...

    SBIR Phase I 2008 Department of Transportation
  8. Step Frequency Ground Penetrating Radar for Location and Evaluation of In-Roadway Sensors

    SBC: STARODUB INC            Topic: 06FH2

    A nondestructive evaluation method is proposed for imaging in-roadway sensors, anticipated to allow them to be located and evaluated in-situ. The techniques uses innovative step frequency GPR hardware together with new data collection and data processing methods to provide high-resolution images of in-roadway sensor features. Recent work by the proposed research team has already demonstrated im ...

    SBIR Phase II 2008 Department of Transportation
  9. Low Cost Transverse Rail Defect Detector

    SBC: Mide Technology Corporation            Topic: 02FR1

    Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

    SBIR Phase II 2008 Department of Transportation
  10. BREAKAWAY LUMINAIRE SUPPORT FOR MINI-CARS

    SBC: Adian Engineering Corp.            Topic: N/A

    DUE TO THE DOWNSIZING OF AUTOMOBILES ON U.S. HIGHWAYS, MINI-CARS HAVE BECOME A MAJOR PART OF THE AUTO POPULATION. THE LIGHT WEIGHT AND HIGH CRUSH RATE OF THESE VEHICLES CAN CAUSEHIGH VELOCITY CHANGE LEVELS WHEN IMPACTING MOST EXISTING BREAKAWAY LUMINAIRE SUPPORTS. THIS INCREASES THE PROBABILI-TY OF INJURY TO OCCUPANTSOF MINI-CARS WHEN IMPACTING LUMI- NAIRE SUPPORTS. CONCEPTS HAVE BEEN DEVELOPED WH ...

    SBIR Phase II 1989 Department of Transportation
US Flag An Official Website of the United States Government