You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. MULTIMEDIA FEASIBILITY STUDY- PHASE I

    SBC: Antares Group Incorporated            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of Transportation
  2. LAUNCH VEHICLE TECHNOLOGY

    SBC: Berner, Lanphier & Assoc Inc.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of Transportation
  3. A VERSATILE, UNVIERSAL VEHICLE DETECTOR BASED ON DSP TECHNIQUES

    SBC: Dvp, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of Transportation
  4. Crack Arrest and Structural Repair of High Strength Steel Piping by In-Situ Sleeving of Nanostructural Materials

    SBC: Integran Technologies U.S.A. Inc.            Topic: 07PH1

    This proposal describes the application of a mature nanotechnology-based crack arrest / structural repair technology as a novel crack arrestor tool for high-strength pipelines. The crack arrestor would comprise a thin layer or sleeve of electrodeposited nanocrystalline material applied to the outside of the pipe either in the coating mill during fabrication or in-field during or following constru ...

    SBIR Phase I 2008 Department of Transportation
  5. Structural Repair of Steel Piping by In-Situ Sleeving of Nanostructured Materials

    SBC: Integran Technologies U.S.A. Inc.            Topic: N/A

    This proposal describes the application of a mature nanotechnology-based crack arrest/structural repair technology as a novel in-field pipeline repair tool. The repair would be comprised of a thin layer or sleeve of electrodeposited nancrystalline material applied to the damaged region of the pipe in order to utilize the "crack filling" characteristic of the process. The concept proposed has alr ...

    SBIR Phase I 2008 Department of Transportation
  6. Compact Laser Shearography System for Crack Detection

    SBC: Laser Technology Inc.            Topic: 05FH1

    Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

    SBIR Phase II 2008 Department of Transportation
  7. Automated High Speed, Low Water Consumption Insulator Cleaner

    SBC: MINI, LLC            Topic: 07FT4

    A novel third rail insulator cleaner and novel cleaning tool - the Spin Wedge, will be developed. The novel cleaner is a skate that rides directly on the third rail and is attached to a service vehicle. Four Spin Wedges, attached to the skate, direct a very rapid series of high pressure water jets arcs, like hammer blows, only on the surface to be cleaned. As the skate moves forward at high spe ...

    SBIR Phase I 2008 Department of Transportation
  8. Microscopic Traffic Flow Simulation Models- An Open Source Approach

    SBC: NEW GLOBAL SYSTEMS FOR INTELLIGENT TRANSPORTATION MANAGEMENT CORPORATION            Topic: 081FH5

    In the Open-source microscopic traffic simulation models project, a component based software framework is proposed to re-engineer CORISM data struture and CORISM interface. Under the architecture combing the innovative framework and the legacy CORISM, prototype of the open source traffic flow simulation models will be developed and demonstrated in the Phase I. In addition, areas identified by th ...

    SBIR Phase I 2008 Department of Transportation
  9. STRUCTURAL DESIGN METHOD FOR THE PREVENTION OF FATIGUE FRACTURE IN TANKERS

    SBC: Optimum Structural Design Inc.            Topic: N/A

    THE TAPS TANKERS HAE DEMONSTRATED THAT FATIGUE FRACTURE OF TANKER STRUCTURE IS A MAJOR FACTOR CONCERNING BOTH POLLUTION HAZARDS AND MAINTENANCE COSTS. SUCH COSTS AND RISKS ARE NOT ABATED BY THE DOUBLE HULL REGULATION OF OPA90. FATIGUE DAMAGE IN WELDED CONNECTIONS IS PROPORTIONAL TO CYCLIC STRESS, WHICH IN TURN IS THE PRODUCT OF THE STRESS CONCENTRATION FACTOR (SCF) AND THE GENERAL STRESS FIELD IN ...

    SBIR Phase I 1993 Department of Transportation
  10. HYBRID POLYMERIC GLAZING MATERIALS

    SBC: Rolltrusion Inc.            Topic: N/A

    A NEW PROCESS IS PROPOSED FOR THE APPLICATION OF POLYMERIC MATERIALS FOR AUTOMOTIVE WINDOWS. SEMI-CRYSTALLINE POLYMERIC MATERIALS CAN BE RENDERED CLEAR THROUGH 3-D ORIENTATION VIA SOLID STATE PROCESSING. APPLYING THIS TECHNOLOGY TO A HYBRID POLYMER STRUCTURE CAN RESULT IN CHEMICALLY RESISTANT, MECHANICALLY STRONG, OPTICALLY CLEAR AND ECONOMICALLY VIABLE PLASTIC WINDOWS FOR GROUND TRANSPORTATION.

    SBIR Phase I 1993 Department of Transportation
US Flag An Official Website of the United States Government