You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Cost Effective Processing Equipment for Large Composite Parts

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: N/A

    Reduced mass materials are critical to the success of aerospace systems. Thus, large air and space structures can benefit from lightweight composite materials. However, their adoption is impaired by the lack of a robust, cost-effective fabrication process, principally because the autoclaves used to consolidate composite laminates are so expensive for large parts. This program develops for US aeros ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  2. Innovative Multi-cellular Pultruded Composite Guardrail

    SBC: Creative Pultrusions, Inc            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of Transportation
  3. Wideband Tunable Fiber Laser

    SBC: Qortek, Inc.            Topic: N/A

    QorTek will develop an advanced hardware demonstration of a compact and functionally integrated tunable laser. The prototype will demonstrate a new dually opposed wideband extension-compression piezo-actuated approach to modulation that will enable larger wavelength excursion at sweep frequencies needed for emission or damage detection by NASA. The demonstration prototype will be VME board fiber m ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  4. High Performance Low Temperature Space Radiator (kTC P914)

    SBC: k Technology Corporation            Topic: N/A

    The observation missions for the New Millennium Program will utilize new materials and sensor technologies that will require cooling to temperatures in the 40K to 150K range. A space radiator with high conductivity at low temperatures that is lightweight and has high stiffness is required. The opportunity presented in this Phase I proposal is to demonstrate a space radiator that will have high con ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  5. High Performance Space Radiator Development (kTC P912)

    SBC: k Technology Corporation            Topic: N/A

    k Technology Corporation (kTC) proposes to develop a high performance satellite radiator material system that satisfies both structural and thermal management requirements. The proposed material system has a honeycomb core with carbon fiber composite encapsulated thermal pyrolytic graphite (TPG) face sheets. The encapsulated TPG face sheets have high conductivity (up to 1300 W/mK), low mass densit ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  6. Variable Conductance Heat Pipes for Radioisotope Stirling Systems

    SBC: Advanced Cooling Technologies, Inc.            Topic: S203

    The overall technical objective of the proposed Phase II program is to complete a system-level demonstration to show the capability and benefits of integrating this backup radiator/Variable Conductance Heat Pipe (VCHP) with the Advanced Stirling Radioisotope Generator (ASRG). The Phase I project developed a feasible VCHP radiator design that can be integrated with the ASRG. In Phase II, a trade ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  7. Vapor Compressor Driven Hybrid Two-Phase Loop

    SBC: Advanced Cooling Technologies, Inc.            Topic: X1101

    The Phase I project successfully demonstrated the feasibility of the vapor compression hybrid two-phase loop (VCHTPL). The test results showed the high temperature-lift capability and robust operation under transient heat loads of the VCHTPL. At the end of Phase I, the VCHTPL technology reached the NASA's defined Technology Readiness Level (TRL) 4 (Component/breadboard validation in a laboratory e ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  8. Pressure Controlled Heat Pipe for Precise Temperature Control

    SBC: Advanced Cooling Technologies, Inc.            Topic: S706

    The principal Phase II objective is to refine and further develop the prototype PCHP into a useful thermal management tool. The Phase I program established the feasibility of thermal control an axially-grooved heat pipe with a variable-volume reservoir. The follow-on Phase II program will address control system optimization, component longevity, reductions in mass and power, and show that the de ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  9. Cryogenic Stepping Piezomotor for Large Torque, Precise Rotary and Linear Motion Control in Passive Optics

    SBC: TRS CERAMICS, INC.            Topic: S601

    TRS Technologies, Virginia Tech., and MTech, Inc. propose to develop high torque (>1.5 kg-cm), lightweight (< 250 g), low power (< 2 watts), high precision (

    SBIR Phase II 2008 National Aeronautics and Space Administration
  10. Computational Modeling in Support of High Altitude Testing Facilities

    SBC: COMBUSTION RESEARCH AND FLOW TECHNOLOGY INC            Topic: O202

    Simulation technology plays an important role in propulsion test facility design and development by assessing risks, identifying failure modes and predicting anomalous behavior of critical systems. This is true for facilities such as the proposed A-3 that will operate at low pressures in conjunction with steam ejectors and the B-2 facility where flame deflector cooling and plume impingement dynami ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government